research communications\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Volume 72| Part 5| May 2016| Pages 675-682

Crystal structures of three 3,4,5-tri­meth­­oxy­benzamide-based derivatives

CROSSMARK_Color_square_no_text.svg

aREQUIMTE, Departamento de Química e Bioquímica, Faculdade de Ciências da Universidade do Porto, Rua do Campo Alegre, 687, P-4169-007, Porto, Portugal, bFP-ENAS-Faculdade de Ciências de Saúde, Escola Superior de Saúde da UFP, Universidade Fernando Pessoa, Rua Carlos da Maia, 296, P-4200-150 Porto, Portugal, cDepartment of Chemistry, University of Aberdeen, Meston Walk, Old Aberdeen AB24 3UE, Scotland, and dCIQ/Departamento de Quιmica e Bioquιmica, Faculdade de Ciências, Universidade do Porto, 4169-007 Porto, Portugal
*Correspondence e-mail: jnlow111@gmail.com

Edited by W. T. A. Harrison, University of Aberdeen, Scotland (Received 31 March 2016; accepted 10 April 2016; online 15 April 2016)

The crystal structures of three benzamide derivatives, viz. N-(6-hy­droxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide, C16H25NO5, (1), N-(6-anilinohex­yl)-3,4,5-tri­meth­oxy­benzamide, C22H30N2O4, (2), and N-(6,6-di­eth­oxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide, C20H33NO6, (3), are described. These compounds differ only in the substituent at the end of the hexyl chain and the nature of these substituents determines the differences in hydrogen bonding between the mol­ecules. In each mol­ecule, the m-meth­oxy substituents are virtually coplanar with the benzyl ring, while the p-meth­oxy substituent is almost perpendicular. The carbonyl O atom of the amide rotamer is trans related with the amidic H atom. In each structure, the benzamide N—H donor group and O acceptor atoms link the mol­ecules into C(4) chains. In 1, a terminal –OH group links the mol­ecules into a C(3) chain and the combined effect of the C(4) and C(3) chains is a ribbon made up of screw related R22(17) rings in which the ⋯O—H⋯ chain lies in the centre of the ribbon and the tri­meth­oxy­benzyl groups forms the edges. In 2, the combination of the benzamide C(4) chain and the hydrogen bond formed by the terminal N—H group to an O atom of the 4-meth­oxy group link the mol­ecules into a chain of R22(17) rings. In 3, the mol­ecules are linked only by C(4) chains.

1. Chemical context

Phenolic acids are widely distributed in the plant kingdom and exist in significant qu­anti­ties in the human diet (e.g. in fruits and vegetables). Like other phenolic compounds they are recognized for their health benefits, which are linked to their biological properties, particularly anti-oxidant, anti-inflammatory and anti­cancer properties (Benfeito et al., 2013[Benfeito, S., Oliveira, C., Soares, P., Fernandes, C., Silva, T., Teixeira, J. & Borges, F. (2013). Mitochondrion, 13, 427-435.], Roleira et al., 2015[Roleira, F. M. F., Tavares-da-Silva, E. J., Varela, C. L., Costa, S. C., Silva, T., Garrido, J. & Borges, F. (2015). Food Chem. 183, 235-258.], Garrido et al., 2013[Garrido, J. & Borges, F. (2013). Food. Res. Int. 54, 1844-1858.], Teixeira et al., 2013[Teixeira, J., Silva, T., Andrade, P. B. & Borges, F. (2013). Curr. Med. Chem. 20, 2939-2952.]). Within this framework, our project has been focused on the synthesis of new mol­ecules based on the benzoic acid scaffold. Accordingly, herein we describe the syntheses and structures of three new benzamide derivatives, viz. N-(6-hy­droxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide (1) N-(6-anilinohex­yl)-3,4,5-tri­meth­oxy­benzamide (2) and N-(6,6-di­eth­oxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide (3).

2. Structural commentary

The mol­ecular structures of compounds 1, 2 and 3 are shown in Figs. 1[link]–3[link][link]. The mol­ecules consist of a tri­meth­oxy­benzamide `head' that is linked to a six-carbon-atom alkyl chain `tail' that ends with different functional groups: a hydroxyl group for 1, a phenyl­amino group for 2 and a dieth­oxy group for 3. In spite of having the same `head' and `tail', the differences observed for their mol­ecular conformations are not only due to the different `end tail' functional groups. Thus, the analysis of the mol­ecular conformations will be performed on a comparative basis encompassing the following: (i) the relative positions of the meth­oxy substituents on the aromatic ring; (ii) the conformation of the amide unit and (iii) the conformation of the alkyl chain. The specifics of the substituents at the end of the alkyl chain determine the differences in the supra­molecular structures, as discussed in the next section.

[Scheme 1]
[Figure 1]
Figure 1
A view of the asymmetric unit of (1) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.
[Figure 2]
Figure 2
A view of the asymmetric unit of (2) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.
[Figure 3]
Figure 3
A view of the asymmetric unit of (3) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.

The m-meth­oxy substituents are virtually co-planar with the benzene ring and are trans related with respect to the p-carbon atom of the ring [the maximum deviation of the meth­oxy carbon atom to the best plane of the phenyl ring is 0.238 (1) Å in 2], while the p-meth­oxy group is nearly perpendicular [the minimum deviation of the meth­oxy carbon atom to the best plane of the benzene ring being 0.923 (2) Å, also in 2]. These relative positions agree with previous predictions of theoret­ical calculations for the stabilization energies for meth­oxy-group conformations attached to aromatic rings (Tsuzuki et al., 2002[Tsuzuki, S., Houjou, H., Nagawa, & Hiratani, K. (2002). J. Chem. Soc. Perkin Trans. 2, pp. 1271-1273.]), which suggested that, while co-planarity is the most stable conformation when there is only one meth­oxy substit­uent on the aromatic ring, the perpendicular conformation may appear as an alternative one when two vicinal meth­oxy groups are present. According to these authors, this spatial arrangement is stabilized by a short C—H⋯O contact between the neighbouring groups. As can be seen in Tables 4[link], 5[link] and 6[link], the shortest distances between a methyl H atom and a vicinal meth­oxy O atom are 2.44, 2.33 and 2.37 Å for 1, 2 and 3, respectively, which do suggest the possibility of a very weak inter­action.

Table 4
Hydrogen-bond geometry (Å, °) for 1[link]

D—H⋯A D—H H⋯A DA D—H⋯A
O19—H19⋯O19i 0.92 (4) 1.86 (4) 2.7799 (14) 176 (4)
N12—H12⋯O11ii 0.77 (3) 2.15 (3) 2.859 (3) 153 (3)
C18—H18B⋯O11iii 0.99 2.64 3.614 (3) 168
C41—H41B⋯O3 0.98 2.44 3.010 (3) 117
Symmetry codes: (i) [-x+1, y+{\script{1\over 2}}, -z+{\script{3\over 2}}]; (ii) x, y-1, z; (iii) [x, -y+{\script{3\over 2}}, z+{\script{1\over 2}}].

Table 5
Hydrogen-bond geometry (Å, °) for 2[link]

Cg is the centroid of the C111–C116 ring.

D—H⋯A D—H H⋯A DA D—H⋯A
N12—H12⋯O11i 0.867 (17) 2.052 (17) 2.9051 (14) 167.9 (15)
N19—H19⋯O4i 0.855 (17) 2.106 (17) 2.9436 (15) 166.3 (15)
C6—H6⋯O11i 0.95 2.33 3.2356 (15) 159
C41—H41C⋯O3 0.98 2.33 2.9287 (18) 119
C112—H112⋯O4i 0.95 2.65 3.3845 (16) 134
C13—H13ACgii 0.99 2.64 3.5272 (15) 148
C31—H31CCgiii 0.98 2.62 3.5205 (16) 152
Symmetry codes: (i) [x, -y+{\script{1\over 2}}, z-{\script{1\over 2}}]; (ii) -x+1, -y+1, -z+1; (iii) [-x, y-{\script{1\over 2}}, -z+{\script{3\over 2}}].

Table 6
Hydrogen-bond geometry (Å, °) for 3[link]

D—H⋯A D—H H⋯A DA D—H⋯A
N12—H12⋯O11i 0.856 (16) 2.169 (16) 2.9890 (13) 160.2 (14)
C6—H6⋯O11i 0.95 2.34 3.2549 (14) 162
C15—H15B⋯O18ii 0.99 2.49 3.4239 (14) 157
Symmetry codes: (i) [x, -y+{\script{3\over 2}}, z-{\script{1\over 2}}]; (ii) [x, -y+{\script{1\over 2}}, z-{\script{1\over 2}}].

In the amide rotamer, the carbonyl oxygen atom is in a trans position with respect to the hydrogen atom of the amidic nitro­gen atom for all compounds, and so, the trimeth­oxy phenyl group is also trans related to the alkyl chain. The rotation of the trimeth­oxy phenyl substituent with respect to the amide rotamer around the C11—C1 bond may be evaluated by the N12—C11—C1—C6 torsion angle, whose values are given in Tables 1[link]–3[link][link]. The mean planes between the C1 benzene ring and the mean plane of the three atoms O11, C11 and N12 are 35.1 (3), 12.00 (16) and 20.19 (14)°, respectively, for 1, 2 and 3, showing that the substituent in 2 is significantly less distorted than in the others. In 1 and in 2, the sense of rotation is anti­clockwise.

Table 1
Selected torsion angles (°) for 1[link]

C31—O3—C3—C4 176.7 (2) C6—C1—C11—N12 35.6 (3)
C31—O3—C3—C2 −3.5 (4) C11—N12—C13—C14 129.1 (3)
C41—O4—C4—C5 108.9 (3) N12—C13—C14—C15 177.5 (2)
C41—O4—C4—C3 −74.4 (3) C13—C14—C15—C16 65.7 (3)
C51—O5—C5—C4 −175.7 (2) C14—C15—C16—C17 173.9 (2)
C51—O5—C5—C6 3.6 (4) C15—C16—C17—C18 −174.4 (2)
C13—N12—C11—C1 −171.3 (2) C16—C17—C18—O19 177.9 (2)
C2—C1—C11—N12 −149.3 (2)    

Table 2
Selected torsion angles (°) for 2[link]

C31—O3—C3—C2 −0.16 (17) C2—C1—C11—N12 −167.30 (11)
C31—O3—C3—C4 178.57 (11) C11—N12—C13—C14 −112.80 (13)
C41—O4—C4—C3 67.59 (16) N12—C13—C14—C15 66.85 (14)
C41—O4—C4—C5 −118.62 (13) C13—C14—C15—C16 −179.75 (11)
C51—O5—C5—C6 −11.14 (18) C14—C15—C16—C17 −175.06 (11)
C51—O5—C5—C4 170.38 (11) C15—C16—C17—C18 175.02 (11)
C13—N12—C11—C1 179.22 (10) C111—N19—C18—C17 172.76 (11)
C6—C1—C11—N12 13.05 (17) C16—C17—C18—N19 67.90 (15)

Table 3
Selected torsion angles (°) for 3[link]

C31—O3—C3—C2 9.59 (16) C2—C1—C11—N12 158.58 (10)
C31—O3—C3—C4 −171.49 (10) C6—C1—C11—N12 −19.07 (15)
C41—O4—C4—C5 61.51 (15) C11—N12—C13—C14 114.65 (12)
C41—O4—C4—C3 −124.05 (12) N12—C13—C14—C15 175.72 (9)
C51—O5—C5—C6 9.66 (17) C13—C14—C15—C16 67.27 (13)
C51—O5—C5—C4 −171.35 (11) C14—C15—C16—C17 175.71 (10)
C13—N12—C11—C1 −170.25 (10) C15—C16—C17—C18 −177.76 (10)

The freedom of rotation around the N—C(alk­yl) bond together with the regular tetra­hedral geometry of the sp3-hybridized carbon atoms allows the mol­ecules to acquire very different conformational profiles for the alkyl chain as is observed in the C11—N12—C13—C14 torsion angles [129.1 (3) for 1, −112.80 (13) for 2 and 114.65 (12)° for 3], as well as the direction of the alkyl chain with respect to the N12—C13 bond, which primarily affects the relative position of the alkyl `tail' with respect to the benzamide moiety. Considering the disposition of the amide rotamer: in 1 and in 3 the alkyl chain is directed backwards from the amide plane and in 2 forward from that plane. This affects the general shape of the mol­ecules, as can be better visualized in Figs. 7[link]–9[link][link]. So, in spite of the consistent zigzag shape of the remaining alkyl chain those mol­ecules have entirely different spatial arrangements.

[Figure 7]
Figure 7
View of the Hirshfeld surface mapped over dnorm for 1.
[Figure 8]
Figure 8
View of the Hirshfeld surface mapped over dnorm for 2.
[Figure 9]
Figure 9
View of the Hirshfeld surface mapped over dnorm for 3.

3. Supra­molecular features

3.1. Hydrogen Bonding and short contacts

Tables 4[link], 5[link] and 6[link] show the hydrogen-bonding details for 1, 2 and 3, respectively. In each compound, the amide group forms the common C(4) chain motif by an N—H⋯O hydrogen bond. In 1, the N12—-H12⋯O11 chain runs parallel to the b axis and adjacent mol­ecules are at unit translation along this axis. The O19—-H19⋯O19 hydrogen bond links the mol­ecules into a C(3) chain formed by the action of the twofold screw axis at ([1\over2], y, [3\over4]). These two chains link the mol­ecules to form a ribbon made up of screw-related R22(17) rings, which runs parallel to the b axis with the ⋯O—H⋯ chain running up the centre of the ribbon and the tri­meth­oxy­benzyl groups forming the edges (Fig. 4[link]). In 2, both the N12—H12⋯O11 and N19—H19⋯O4 hydrogen bonds link the mol­ecules into a chain of R22(17) rings, which are bridged by the C11—N12 bond. This chain runs parallel to the c axis and is formed by the action of the c-glide plane at 1/4 along the b axis (Fig. 5[link]). In 3, the N12—H12⋯O11 hydrogen bond links the mol­ecules into a C(4) chain, which runs parallel to the c axis and which is formed by the action of the c-glide plane at 3/4 along the b axis, Fig. 6[link]. Possible weak C—H⋯O inter­actions are detailed in the relevant Tables 4[link]–6[link][link].

[Figure 4]
Figure 4
Compound 1: view of the ribbon structure formed by the N12—H12⋯O11 and O19—H19⋯O19 hydrogen bonds. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) −x + 1, −y + [{1\over 2}], −z + [{3\over 2}]; (ii) −x, −y − 1, −z + 1; (iii) −x + 1, −y − [{1\over 2}], −z + [{3\over 2}]; (iv) −x + 1, −y + 1, −z + 1; (v) −x + 1, −y + [{3\over 2}], −z + [{3\over 2}].
[Figure 5]
Figure 5
Compound 2: the chain of rings formed by the inter­action of the N12—H12⋯O11 and N19—H19⋯O4 hydrogen bonds. This chain extends along the c axis and is generated by the c-glideplane at y = [1\over 4]. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) x, −y − [{1\over 2}], z − [{1\over 2}]; (ii) x, −y + [{1\over 2}], z + [{1\over 2}].
[Figure 6]
Figure 6
Compound 2: the simple C(4) chain formed by the N12—H12⋯O11 hydrogen bond. This chain extends along the c axis and is generated by the c glideplane at y = [3\over4]. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) x, −y − [{3\over 2}], z − [{1\over 2}]; (ii) x, −y − [{1\over 2}], z + [{1\over 2}].

3.2. Hirshfeld Surfaces

Hirshfeld surfaces were generated using Crystal Explorer 3.1 (Wolff et al., 2012[Wolff, S. K., Grimwood, D. J., McKinnon, J. J., Turner, M. J., Jayatilaka, D. & Spackman, M. A. (2012). Crystal Explorer. The University of Western Australia.]) mapped over dnorm for the title compounds. The contact distances di and de from the Hirshfeld surface to the nearest atom inside and outside, respectively, were used to analyse the inter­molecular inter­actions through the mapping of dnorm and the plot of di versus de provides two-dimensional fingerprint plots (Rohl et al., 2008[Rohl, A. L., Moret, M., Kaminsky, W., Claborn, K., McKinnon, J. J. & Kahr, B. (2008). Cryst. Growth Des. 8, 4517-4525.]) that are used to summarize those contacts. Figs. 7[link]–9[link][link] are views of the Hirshfeld surfaces mapped over dnorm for 1, 2 and 3 respectively. Since the mol­ecules have a six-atom alkyl chain, most of the contacts are H⋯H contacts. Leaving these aside, the remaining surface highlights the red areas that indicate contact points for the atoms participating in the (O/N/C)—H⋯O inter­molecular inter­actions. There are also significant contributions of C—H⋯C contacts, as can be visualized in the figures for each compound. The percentages of (O/N/C)—H⋯O and C—H⋯C contacts are listed in Table 7[link].

Table 7
The percentages of (O/N/C)–H⋯O and C—H⋯C contacts

Contact 1 2 3
H⋯H 60.0 60.8 68.9
H⋯O/O⋯H 25.4 16.0 19.0
H⋯C/C⋯H 13.0 21.4 10.1
H⋯N/N⋯H 0.03 1.7 0.8

In all three compounds, red spots near the amide indicate the N(amide)—H⋯O hydrogen bonds that connect the amide groups in the classic fashion, making a C(4) chain for all compounds. In 2 and 3, there are two pairs of red spots at the amide environment indicating that, in these structures, the carbonyl oxygen atom acts as the receptor for another H contact (the C6—H6⋯O11 contact).

The classical O(hy­droxy)–H⋯O hydrogen bond is located at the chain `tail' in 1 and is identified by two red spots indicating that the oxygen atom O19 acts as donor and acceptor making the C(3) chain. The red spots in structure 2 show another two hydrogen bonds: one of these involves the amine nitro­gen atom of the end `tail' phenyl­amine residue and the other also indicates the involvement of the p-meth­oxy group located at the tri­meth­oxy­benzamide `head'. This behaviour contrasts with that observed for 1 and 3, in which the meth­oxy groups are not involved in classical hydrogen bonding.

The full fingerprint (FP) plots showing various crystal packing inter­actions are given in Figs. 10[link]–12[link][link]; the contributions from various contacts, listed in Table 7[link], were selected by the partial analysis of these plots. The FP plots show, for all compounds, a pair of long sharp spikes characteristic of a strong hydrogen bond, in an area near 1.7–1.8 Å. The symmetry of the upper left/down right spikes is an indication for the balance between the donor and acceptor character of the atoms involved in the hydrogen bonding, as seen before. They correspond to the N—H⋯O and O—H⋯O contacts. The de/di points corresponding to H⋯H inter­actions appear around the hydrogen atom van der Waals radius of 1.20 Å. The wings in the graphical representation of 2 indicate that C—H⋯π inter­actions are more relevant in this crystal structure, highlighting the contribution of the C—H⋯π inter­action (Table 5[link]) involving the phenyl­amide residue of the `tail'. Structure 2 also displays the biggest percentage of H⋯C/C⋯H contacts: besides the C—H⋯π contacts with the aromatic ring that define the supra­molecular structure for all compounds, in 2 the benzene ring of the phenyl­amine forms an extra inter­action of this kind

[Figure 10]
Figure 10
The full fingerprint (FP) plot showing various crystal packing inter­actions for 1. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.
[Figure 11]
Figure 11
The full fingerprint (FP) plot showing various crystal packing inter­actions for 2. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.
[Figure 12]
Figure 12
The full fingerprint (FP) plot showing various crystal packing inter­actions for 3. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.

4. Database survey

A search made in the February 2016 version of the Cambridge Structural Database, (Groom et al., 2016[Groom, C. R., Bruno, I. J., Lightfoot, M. P. & Ward, S. C. (2016). Acta Cryst. B72, 171-179.]), revealed the existence of 37 structures (containing 48 unique mol­ecules) featuring the 3,4,5-trisubstituted benzamide scaffold.

ortho-C atom C2 was selected such that the amino N atom N12 was trans to it and in the following survey it is trans-related torsion angles which are discussed. The analysis of the torsion angles for the o-C atoms of the benzyl ring and the N atom of the benzamide group showed two distinct populations about 180° in the angular ranges −180 to −145° with a median value of −152.5° and 136–171° with a median value of 149.2°. The value of −179.3° for HESLEX, N,N-(heptane-2,6-di­yl)-N′-(3,4,5-meth­oxy­benzo­yl)thio­urea (Dillen et al., 2006[Dillen, J., Woldu, M. G. & Koch, K. R. (2006). Acta Cryst. E62, o5225-o5227.]) is unusual: if this is excluded, then the lower limit for the negative range is −172°. The methyl groups attached to atoms C3 and C5 are inclined to the benzyl ring in the range −20 to 24° with a median values close to 0°. This excludes a mol­ecule with a C5 meth­oxy torsion angle of −85.9°: PIDTEC, 4-hy­droxy-3,5-di­eth­oxy­benzaldehyde-3,4,5-tri­meth­oxy­benzoylhydrazone monohydrate (Sun et al., 2007[Sun, Y.-F., Sun, X.-Z., Li, J.-K. & Zheng, Z.-B. (2007). Acta Cryst. E63, o2180-o2181.]). The methyl groups attached to atoms C4 are inclined to the benzyl ring in the ranges ±63 to ±122° with a median values close to ±90°. Of these 48 mol­ecules, 16 participate in N—H⋯O C(4) chains similar to those in the present compounds. In these structures, the torsion angles for the trans o-C atoms of the benzyl ring and the N atom of the benzamide group showed that, as above, the torsion angles lie in two populations: one in the range −153 to −145° and the other in the very similar positive range 142 to 165° with median values of −147.6° and 148.1°, respectively. The value for this torsion angle for 1, −149.3 (3)° lies within the negative range, those for 2, −167.27 (12)° and 3, −158.58 (10)° lie outside this range.The results of the database searches are included in the supporting information.

5. Synthesis and crystallization

The title benzoic derivatives were obtained in moderate-to-high yields via the synthetic strategy described in the Scheme below. Compound 1 was obtained from 3,4,5-tri­meth­oxy­benz­oic acid by an amidation reaction using ethyl­chloro­formate as coupling agent. After oxidation of compound 1 alcohol function to an aldehyde, compounds (2) and (3) could be obtained. Compound 2 was synthesized by a reductive amination reaction using sodium tri­acet­oxy­boro­hydride as reducing agent. Compound 3 was synthesized using an ethano­lic solution of N-benzyl­hydroxyl­amine hydro­chlor­ide.

[Scheme 2]

1: N-(6-hy­droxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide (1). Overall yield 82%; m.p. 393–399 K; crystallization solvent: ethyl acetate, to yield colourless needles.

2: N-(6-anilinohex­yl)-3,4,5-tri­meth­oxy­benzamide (2). Overall yield 51%; m.p. 376–388 K; crystallization solvent: ethyl acetate to yield colourless laths

3: N-(6,6-di­eth­oxy­hex­yl)-3,4,5-tri­meth­oxy­benzamide (3). Overall yield 50%; m.p. 364–374 K; crystallization solvents: chloro­form/n-hexane to yield colourless needles.

6. Refinement

Crystal data, data collection and structure refinement details are summarized in Table 8[link]. The N—H and O—H hydrogen atoms were located in difference Fourier maps and freely refined. The C-bound H atoms were included in calculated positions and treated as riding: C—H(aromatic) = 0.95 Å and C—H2(methyl­ene) = 0.99 Å with Uiso = 1.2Ueq(C), C—H(meth­yl) = 0.98 Å with Uiso = 1.5Ueq(C).

Table 8
Experimental details

  1 2 3
Crystal data
Chemical formula C16H25NO5 C22H30N2O4 C20H33NO6
Mr 311.37 386.48 383.47
Crystal system, space group Monoclinic, P21/c Monoclinic, P21/c Monoclinic, P21/c
Temperature (K) 100 100 100
a, b, c (Å) 22.3351 (18), 5.0467 (4), 14.2265 (10) 11.5626 (8), 19.5328 (9), 9.5488 (7) 24.6345 (18), 8.4646 (5), 10.0598 (7)
β (°) 99.956 (7) 109.369 (8) 100.851 (2)
V3) 1579.4 (2) 2034.5 (2) 2060.2 (2)
Z 4 4 4
Radiation type Mo Kα Mo Kα Cu Kα
μ (mm−1) 0.10 0.09 0.74
Crystal size (mm) 0.15 × 0.02 × 0.01 0.25 × 0.08 × 0.02 0.80 × 0.05 × 0.02
 
Data collection
Diffractometer Rigaku AFC12 Rigaku AFC12 Rigaku Saturn944+
Absorption correction Multi-scan (CrysAlis PRO; Agilent, 2014[Agilent (2014). CrysAlis PRO. Agilent Technologies UK Ltd, Yarnton, England.]) Multi-scan (CrysAlis PRO; Agilent, 2014[Agilent (2014). CrysAlis PRO. Agilent Technologies UK Ltd, Yarnton, England.]) Multi-scan (CrystalClear-SM Expert; Rigaku, 2012[Rigaku (2012). CrystalClear-SM Expert. Rigaku Corporation, Tokyo, Japan.])
Tmin, Tmax 0.803, 1.000 0.384, 1.000 0.814, 1.000
No. of measured, independent and observed [I > 2σ(I)] reflections 19396, 3627, 2039 26057, 4655, 3869 18993, 3706, 3362
Rint 0.123 0.040 0.037
(sin θ/λ)max−1) 0.649 0.649 0.602
 
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.062, 0.133, 0.97 0.041, 0.105, 1.04 0.035, 0.095, 1.05
No. of reflections 3626 4652 3706
No. of parameters 210 264 253
H-atom treatment H atoms treated by a mixture of independent and constrained refinement H atoms treated by a mixture of independent and constrained refinement H atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å−3) 0.25, −0.33 0.32, −0.18 0.23, −0.28
Computer programs: CrystalClear-SM Expert (Rigaku, 2012[Rigaku (2012). CrystalClear-SM Expert. Rigaku Corporation, Tokyo, Japan.]), CrysAlis PRO (Agilent, 2014[Agilent (2014). CrysAlis PRO. Agilent Technologies UK Ltd, Yarnton, England.]), SHELXT (Sheldrick, 2015a[Sheldrick, G. M. (2015a). Acta Cryst. A71, 3-8.]), Flipper 25 (Oszlányi & Sütő, 2004[Oszlányi, G. & Sütő, A. (2004). Acta Cryst. A60, 134-141.]), OLEX2 (Dolomanov et al., 2009[Dolomanov, O. V., Bourhis, L. J., Gildea, R. J., Howard, J. A. K. & Puschmann, H. (2009). J. Appl. Cryst. 42, 339-341.]), OSCAIL (McArdle et al., 2004[McArdle, P., Gilligan, K., Cunningham, D., Dark, R. & Mahon, M. (2004). CrystEngComm, 6, 303-309.]), ShelXle (Hübschle et al., 2011[Hübschle, C. B., Sheldrick, G. M. & Dittrich, B. (2011). J. Appl. Cryst. 44, 1281-1284.]), SHELXL2014 (Sheldrick, 2015b[Sheldrick, G. M. (2015b). Acta Cryst. C71, 3-8.]), Mercury (Macrae et al., 2006[Macrae, C. F., Edgington, P. R., McCabe, P., Pidcock, E., Shields, G. P., Taylor, R., Towler, M. & van de Streek, J. (2006). J. Appl. Cryst. 39, 453-457.]) and PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]).

Supporting information


Chemical context top

Phenolic acids are widely distributed in the plant kingdom and exist in significant qu­anti­ties in the human diet (e.g. in fruits and vegetables). Like other phenolic compounds they are recognized for their health benefits, which are linked to their biological properties, particularly anti-oxidant, anti-inflammatory and anti­cancer properties (Benfeito et al., 2013, Roleira et al., 2015, Garrido et al., 2013, Teixeira et al., 2013). Within this framework, our project has been focused on preparing new molecules based on the benzoic acid scaffold. Accordingly, herein we describe the syntheses and structures of three new benzamide derivatives, viz. N-(6-hy­droxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (1) N-(6-anilino­hexyl)-3,4,5-tri­meth­oxy­benzamide (2) and N-(6,6-di­eth­oxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (3).

Structural commentary top

The molecular structures of compounds 1, 2 and 3 are shown in Figs. 1–3. The molecules consist of a tri­meth­oxy­benzamide `head' that is linked to a six-carbon-atom alkyl chain `tail' that ends with different functional groups: a hydroxyl group for 1, a phenyl­amino group for 2 and a di­eth­oxy group for 3. In spite of having the same `head' and `tail', the differences observed for their molecular conformations are not only due to the different `end tail' functional groups. Thus, the analysis of the molecular conformations will be comparative encompassing the following: (i) the relative positions of the meth­oxy substituents of the benzamide grouping; (ii) the conformation of the amide unit and (iii) the conformation of the alkyl chain. The specifics of the substituents at the end of the alkyl chain determine the differences in the supra­molecular structures, as discussed in the next section.

The m-meth­oxy substituents are virtually co-planar with their attached phenyl ring and are trans related with respect to the p-carbon atom of the ring [maximum deviation of the meth­oxy carbon atom to the best plane of the phenyl ring is 0.238 (1) Å in 2 while the p-meth­oxy group is nearly perpendicular, the minimum deviation of the meth­oxy carbon atom to the best plane of the phenyl ring being 0.923 (2) Å, also in 2]. These relative positions agree with previous predictions of theoretical calculations for the stabilization energies for meth­oxy-group conformations attached to aromatic rings (Tsuzuki et al., 2002), which suggested that, while co-planarity is the most stable conformation when the meth­oxy substituent is isolated, the perpendicular conformation may appear as an alternative one when two vicinal meth­oxy groups are present. According to these authors, this spatial arrangement is stabilized by a short C—H···O contact between the neighbouring groups. As can be seen in Tables 4, 5 and 6, the shortest distances between a methyl H atom and a vicinal meth­oxy O atom are 2.44, 2.33 and 2.37 Å for 1, 2 and 3, respectively, which do suggest the possibility of a very weak inter­action.

In the amide rotamer, the carbonyl oxygen atom is in a trans position with respect to the hydrogen atom of the amidic nitro­gen atom for all compounds, and so, the tri­meth­oxy phenyl group is also trans related to the alkyl chain. The rotation of the tri­meth­oxy phenyl substituent with respect to the amide rotamer around the C11—C1 bond may be evaluated by the N12—C11—C1—C6 torsion angle, whose values are given in Tables 1–3. The mean planes between the C1 phenyl ring and the mean plane of the three atoms O11, C11 and N12 are 35.1 (3), 12.00 (16) and 20.19 (14)°, respectively, for 1, 2 and 3, showing that the substituent in 2 is significantly less distorted than in the others. In 1 and in 2, the sense of rotation is anti­clockwise.

The freedom of rotation around the N—C(alkyl) bond together with the regular tetra­hedral geometry of the sp3-hybridized carbon atoms allows the molecules to acquire very different conformational profiles for the alkyl chain as is observed in the C11—N12—C13—C14 torsion angles [129.1 (3) for 1, –112.80 (13) for 2 and 114.65 (12)° for 3], as well as the direction of the alkyl chain with respect to the N12—C13 bond, which primarily affects the relative position of the alkyl `tail' with respect to the benzamide moiety. Considering the disposition of the amide rotamer: in 1 and in 3 the alkyl chain is directed backwards from the amide plane and in 2 forward from that plane. This affects the general shape of the molecules, as can be better visualized in Figs. 7–9. So, in spite of the consistent zigzag shape of the remaining alkyl chain those molecules have entirely different spatial arrangements.

Supra­molecular features top

Hydrogen Bonding and short contacts top

Tables 4, 5 and 6 show the hydrogen-bonding details for 1, 2 and 3, respectively. In each compound, the amide group forms the common C(4) chain motif by an N—H···O hydrogen bond. In 1, the N12—-H12···O11 chain runs parallel to the b axis and adjacent molecules are at unit translation along this axis. The O19—-H19···O19 hydrogen bond links the molecules into a C(3) chain formed by the action of the twofold screw axis at (1/2, y, 3/4). These two chains link the molecules to form a ribbon made up of screw-related R22(17) rings, which runs parallel to the b axis with the ···O—H··· chain running up the centre of the ribbon and the tri­meth­oxy­benzyl groups forming the edges (Fig. 4). In 2, both the N12—H12···O11 and N19—H19···O4 hydrogen bonds link the molecules into a chain of R22(17) rings, which are linked by the C11—N12 bond. This chain runs parallel to the c axis and is formed by the action of the c-glide plane at 1/4 along the b axis (Fig. 5). In 3, the N12—H12···O11 hydrogen bond links the molecules into a C(4) chain, which runs parallel to the c axis and which is formed by the action of the c-glide plane at 3/4 along the b axis, Fig. 6. Possible weak C—H···O inter­actions are detailed in the relevant Tables 4–6.

Hirshfeld Surfaces top

Hirshfeld surfaces were generated using Crystal Explorer 3.1 (Wolff et al., 2012) mapped over dnorm for the title compounds. The contact distances di and de from the Hirshfeld surface to the nearest atom inside and outside, respectively, were used to analyse the inter­molecular inter­actions through the mapping of dnorm and the plot of di versus de provides two-dimensional fingerprint plots (Rohl et al., 2008) that are used to summarize those contacts. Figs. 7–9 are views of the Hirshfeld surfaces mapped over dnorm for 1, 2 and 3 respectively. Since the molecules have a six-atom alkyl chain, most of the contacts are H···H contacts. Leaving these aside, the remaining surface highlights the red areas that indicate contact points for the atoms participating in the (O/N/C)—H···O inter­molecular inter­actions. There are also significant contributions of C—H···C contacts, as can be visualized in the figures for each compound. The percentages of (O/N/C)—H···O and C—H···C contacts are listed in Table 7.

In all three compounds, red spots near the amide indicate the N(amide)—H···O hydrogen bonds that connect the amide groups in the classic fashion, making the C(4) chain for all compounds. In 2 and 3, there are two pairs of red spots at the amide environment indicating that, in these structures, the carbonyl oxygen atom acts as the receptor for another H contact (the C6—H6···O11 contact).

The classical O(hy­droxy)–H···O hydrogen bond is located at the chain `tail' in 1 and is identified by two red spots indicating that the oxygen atom O19 acts as donor and acceptor making the C(3) chain. The red spots in structure 2 show another two hydrogen bonds: one of these involves the amine nitro­gen atom of the end `tail' phenyl­amine residue and the other also indicates the involvement of the p-meth­oxy group located at the tri­meth­oxy­benzamide `head'. This behaviour contrasts with that observed for 1 and 3, in which the meth­oxy groups are not involved in classical hydrogen bonding.

The full fingerprint (FP) plots showing various crystal packing inter­actions are given in Figs. 10–12; the contributions from various contacts, listed in Table 7, were selected by the partial analysis of these plots. The FP plots show, for all compounds, a pair of long sharp spikes characteristic of a strong hydrogen bond, in an area near 1.7–1.8 Å. The symmetry of the upper left/down right spikes is an indication for the balance between the donor and acceptor character of the atoms involved in the hydrogen bonding, as seen before. They correspond to the N—H···O and O—H···O contacts. The de/di points corresponding to H···H inter­actions appear around the hydrogen atom van der Waals radius of 1.20 Å. The wings in the graphical representation of 2 indicate that C—H ···π inter­actions are more relevant in this crystal structure, highlighting the contribution of the C—H ···π inter­action (Table 5) involving the phenyl­amide residue of the `tail'. Structure 2 also displays the biggest percentage of H···C/C ···H contacts: besides the C—H···π contacts with the aromatic ring that define the supra­molecular structure for all compounds, in 2 the benzene ring of the phenyl­amine forms an extra inter­action of this kind

Database survey top

A search made in the February 2016 version of the Cambridge Structural Database, (Groom et al., 2016), revealed the existence of 37 structures (containing 48 unique molecules) featuring the 3,4,5-benzamide scaffold.

ortho-Atom C2 was selected such that the amino N atom N12 was trans to it and in the following survey it is trans-related torsion angles which are discussed. The analysis of the torsion angles for the o-C atoms of the benzyl ring and the N atom of the benzamide group showed two distinct populations about 180° in the angular ranges -180–145° with a median value of -152.5° and 136–171° with a median value of 149.2°. The value of -179.3° for HESLEX, N,N-(heptane-2,6-diyl)-N'-(3,4,5-meth­oxy­benzoyl)­thio­urea (Dillen et al., 2006) is unusual: if this is excluded, then the lower limit for the negative range is -172°. The methyl groups attached to atoms C3 and C5 are inclined to the benzyl ring in the range -20 to 24° with a median values close to 0°. This excludes a molecule with a C5 meth­oxy torsion angle of -85.9°: PIDTEC, 4-hy­droxy-3,5-di­eth­oxy­benzaldehyde-3,4,5-tri­meth­oxy­benzoyl­hydrazone monohydrate (Sun et al., 2007). The methyl groups attached to atoms C4 are inclined to the benzyl ring in the ranges ±63 to ±122° with a median values close to ±90°. Of these 48 molecules, 16 participate in N—H···O C(4) chains similar to those in the present compounds. In these structures, the torsion angles for the trans o-C atoms of the benzyl ring and the N atom of the benzamide group showed that, as above, the torsion angles lie in two populations: one in the range -153 to -145° and the other in the very similar positive range 142 to 165° with median values of -147.6° and 148.1°, respectively. The value for this torsion angle for 1, -149.3 (3)° lies within the negative range, those for 2, -167.27 (12)° and 3, -158.58 (10)° lie outside this range.

The search results are supplied as supplementary information. Please send file as it appears to be missing

Synthesis and crystallization top

The title benzoic derivatives were obtained in moderate-to-high yields via the synthetic strategy described in the Scheme below. Compound 1 was obtained from 3,4,5-tri­meth­oxy­benzoic acid by an amidation reaction using ethyl­chloro­formate as coupling agent. After oxidation of compound 1 alcohol function to an aldehyde, N-(6-compounds (2) and (3) were obtained. Compound 2 was synthesized by a reductive amination reaction using sodium tri­acet­oxy­borohydride as reducing agent. Compound 3 was synthesized using an ethano­lic solution of N-benzyl­hydroxyl­amine hydro­chloride.

1: N-(6-hy­droxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (1). Overall yield 82%; m.p. 393–399 K; crystallization solvent: ethyl acetate, to yield colourless needles.

2: N-(6-anilino­hexyl)-3,4,5-tri­meth­oxy­benzamide (2). Overall yield 51%; m.p. 376–388 K; crystallization solvent: ethyl acetate to yield colourless laths

3: N-(6,6-di­eth­oxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (3). Overall yield 50%; m.p. 364–374 K; crystallization solvents: chloro­form/n-hexane to yield colourless needles.

Refinement top

Crystal data, data collection and structure refinement details are summarized in Table 8. H atoms were treated as riding atoms with C—H(aromatic), 0.95 Å, with Uiso = 1.2Ueq(C), C—H2(methyl­ene), 0.99 Å, with Uiso = 1.2Ueq(C),C—H(methyl) 0.98 Å with Uiso = 1.5Ueq(C). N—H and O—H hydrogen atoms were refined.

Structure description top

Phenolic acids are widely distributed in the plant kingdom and exist in significant qu­anti­ties in the human diet (e.g. in fruits and vegetables). Like other phenolic compounds they are recognized for their health benefits, which are linked to their biological properties, particularly anti-oxidant, anti-inflammatory and anti­cancer properties (Benfeito et al., 2013, Roleira et al., 2015, Garrido et al., 2013, Teixeira et al., 2013). Within this framework, our project has been focused on preparing new molecules based on the benzoic acid scaffold. Accordingly, herein we describe the syntheses and structures of three new benzamide derivatives, viz. N-(6-hy­droxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (1) N-(6-anilino­hexyl)-3,4,5-tri­meth­oxy­benzamide (2) and N-(6,6-di­eth­oxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (3).

The molecular structures of compounds 1, 2 and 3 are shown in Figs. 1–3. The molecules consist of a tri­meth­oxy­benzamide `head' that is linked to a six-carbon-atom alkyl chain `tail' that ends with different functional groups: a hydroxyl group for 1, a phenyl­amino group for 2 and a di­eth­oxy group for 3. In spite of having the same `head' and `tail', the differences observed for their molecular conformations are not only due to the different `end tail' functional groups. Thus, the analysis of the molecular conformations will be comparative encompassing the following: (i) the relative positions of the meth­oxy substituents of the benzamide grouping; (ii) the conformation of the amide unit and (iii) the conformation of the alkyl chain. The specifics of the substituents at the end of the alkyl chain determine the differences in the supra­molecular structures, as discussed in the next section.

The m-meth­oxy substituents are virtually co-planar with their attached phenyl ring and are trans related with respect to the p-carbon atom of the ring [maximum deviation of the meth­oxy carbon atom to the best plane of the phenyl ring is 0.238 (1) Å in 2 while the p-meth­oxy group is nearly perpendicular, the minimum deviation of the meth­oxy carbon atom to the best plane of the phenyl ring being 0.923 (2) Å, also in 2]. These relative positions agree with previous predictions of theoretical calculations for the stabilization energies for meth­oxy-group conformations attached to aromatic rings (Tsuzuki et al., 2002), which suggested that, while co-planarity is the most stable conformation when the meth­oxy substituent is isolated, the perpendicular conformation may appear as an alternative one when two vicinal meth­oxy groups are present. According to these authors, this spatial arrangement is stabilized by a short C—H···O contact between the neighbouring groups. As can be seen in Tables 4, 5 and 6, the shortest distances between a methyl H atom and a vicinal meth­oxy O atom are 2.44, 2.33 and 2.37 Å for 1, 2 and 3, respectively, which do suggest the possibility of a very weak inter­action.

In the amide rotamer, the carbonyl oxygen atom is in a trans position with respect to the hydrogen atom of the amidic nitro­gen atom for all compounds, and so, the tri­meth­oxy phenyl group is also trans related to the alkyl chain. The rotation of the tri­meth­oxy phenyl substituent with respect to the amide rotamer around the C11—C1 bond may be evaluated by the N12—C11—C1—C6 torsion angle, whose values are given in Tables 1–3. The mean planes between the C1 phenyl ring and the mean plane of the three atoms O11, C11 and N12 are 35.1 (3), 12.00 (16) and 20.19 (14)°, respectively, for 1, 2 and 3, showing that the substituent in 2 is significantly less distorted than in the others. In 1 and in 2, the sense of rotation is anti­clockwise.

The freedom of rotation around the N—C(alkyl) bond together with the regular tetra­hedral geometry of the sp3-hybridized carbon atoms allows the molecules to acquire very different conformational profiles for the alkyl chain as is observed in the C11—N12—C13—C14 torsion angles [129.1 (3) for 1, –112.80 (13) for 2 and 114.65 (12)° for 3], as well as the direction of the alkyl chain with respect to the N12—C13 bond, which primarily affects the relative position of the alkyl `tail' with respect to the benzamide moiety. Considering the disposition of the amide rotamer: in 1 and in 3 the alkyl chain is directed backwards from the amide plane and in 2 forward from that plane. This affects the general shape of the molecules, as can be better visualized in Figs. 7–9. So, in spite of the consistent zigzag shape of the remaining alkyl chain those molecules have entirely different spatial arrangements.

Tables 4, 5 and 6 show the hydrogen-bonding details for 1, 2 and 3, respectively. In each compound, the amide group forms the common C(4) chain motif by an N—H···O hydrogen bond. In 1, the N12—-H12···O11 chain runs parallel to the b axis and adjacent molecules are at unit translation along this axis. The O19—-H19···O19 hydrogen bond links the molecules into a C(3) chain formed by the action of the twofold screw axis at (1/2, y, 3/4). These two chains link the molecules to form a ribbon made up of screw-related R22(17) rings, which runs parallel to the b axis with the ···O—H··· chain running up the centre of the ribbon and the tri­meth­oxy­benzyl groups forming the edges (Fig. 4). In 2, both the N12—H12···O11 and N19—H19···O4 hydrogen bonds link the molecules into a chain of R22(17) rings, which are linked by the C11—N12 bond. This chain runs parallel to the c axis and is formed by the action of the c-glide plane at 1/4 along the b axis (Fig. 5). In 3, the N12—H12···O11 hydrogen bond links the molecules into a C(4) chain, which runs parallel to the c axis and which is formed by the action of the c-glide plane at 3/4 along the b axis, Fig. 6. Possible weak C—H···O inter­actions are detailed in the relevant Tables 4–6.

Hirshfeld surfaces were generated using Crystal Explorer 3.1 (Wolff et al., 2012) mapped over dnorm for the title compounds. The contact distances di and de from the Hirshfeld surface to the nearest atom inside and outside, respectively, were used to analyse the inter­molecular inter­actions through the mapping of dnorm and the plot of di versus de provides two-dimensional fingerprint plots (Rohl et al., 2008) that are used to summarize those contacts. Figs. 7–9 are views of the Hirshfeld surfaces mapped over dnorm for 1, 2 and 3 respectively. Since the molecules have a six-atom alkyl chain, most of the contacts are H···H contacts. Leaving these aside, the remaining surface highlights the red areas that indicate contact points for the atoms participating in the (O/N/C)—H···O inter­molecular inter­actions. There are also significant contributions of C—H···C contacts, as can be visualized in the figures for each compound. The percentages of (O/N/C)—H···O and C—H···C contacts are listed in Table 7.

In all three compounds, red spots near the amide indicate the N(amide)—H···O hydrogen bonds that connect the amide groups in the classic fashion, making the C(4) chain for all compounds. In 2 and 3, there are two pairs of red spots at the amide environment indicating that, in these structures, the carbonyl oxygen atom acts as the receptor for another H contact (the C6—H6···O11 contact).

The classical O(hy­droxy)–H···O hydrogen bond is located at the chain `tail' in 1 and is identified by two red spots indicating that the oxygen atom O19 acts as donor and acceptor making the C(3) chain. The red spots in structure 2 show another two hydrogen bonds: one of these involves the amine nitro­gen atom of the end `tail' phenyl­amine residue and the other also indicates the involvement of the p-meth­oxy group located at the tri­meth­oxy­benzamide `head'. This behaviour contrasts with that observed for 1 and 3, in which the meth­oxy groups are not involved in classical hydrogen bonding.

The full fingerprint (FP) plots showing various crystal packing inter­actions are given in Figs. 10–12; the contributions from various contacts, listed in Table 7, were selected by the partial analysis of these plots. The FP plots show, for all compounds, a pair of long sharp spikes characteristic of a strong hydrogen bond, in an area near 1.7–1.8 Å. The symmetry of the upper left/down right spikes is an indication for the balance between the donor and acceptor character of the atoms involved in the hydrogen bonding, as seen before. They correspond to the N—H···O and O—H···O contacts. The de/di points corresponding to H···H inter­actions appear around the hydrogen atom van der Waals radius of 1.20 Å. The wings in the graphical representation of 2 indicate that C—H ···π inter­actions are more relevant in this crystal structure, highlighting the contribution of the C—H ···π inter­action (Table 5) involving the phenyl­amide residue of the `tail'. Structure 2 also displays the biggest percentage of H···C/C ···H contacts: besides the C—H···π contacts with the aromatic ring that define the supra­molecular structure for all compounds, in 2 the benzene ring of the phenyl­amine forms an extra inter­action of this kind

A search made in the February 2016 version of the Cambridge Structural Database, (Groom et al., 2016), revealed the existence of 37 structures (containing 48 unique molecules) featuring the 3,4,5-benzamide scaffold.

ortho-Atom C2 was selected such that the amino N atom N12 was trans to it and in the following survey it is trans-related torsion angles which are discussed. The analysis of the torsion angles for the o-C atoms of the benzyl ring and the N atom of the benzamide group showed two distinct populations about 180° in the angular ranges -180–145° with a median value of -152.5° and 136–171° with a median value of 149.2°. The value of -179.3° for HESLEX, N,N-(heptane-2,6-diyl)-N'-(3,4,5-meth­oxy­benzoyl)­thio­urea (Dillen et al., 2006) is unusual: if this is excluded, then the lower limit for the negative range is -172°. The methyl groups attached to atoms C3 and C5 are inclined to the benzyl ring in the range -20 to 24° with a median values close to 0°. This excludes a molecule with a C5 meth­oxy torsion angle of -85.9°: PIDTEC, 4-hy­droxy-3,5-di­eth­oxy­benzaldehyde-3,4,5-tri­meth­oxy­benzoyl­hydrazone monohydrate (Sun et al., 2007). The methyl groups attached to atoms C4 are inclined to the benzyl ring in the ranges ±63 to ±122° with a median values close to ±90°. Of these 48 molecules, 16 participate in N—H···O C(4) chains similar to those in the present compounds. In these structures, the torsion angles for the trans o-C atoms of the benzyl ring and the N atom of the benzamide group showed that, as above, the torsion angles lie in two populations: one in the range -153 to -145° and the other in the very similar positive range 142 to 165° with median values of -147.6° and 148.1°, respectively. The value for this torsion angle for 1, -149.3 (3)° lies within the negative range, those for 2, -167.27 (12)° and 3, -158.58 (10)° lie outside this range.

The search results are supplied as supplementary information. Please send file as it appears to be missing

Synthesis and crystallization top

The title benzoic derivatives were obtained in moderate-to-high yields via the synthetic strategy described in the Scheme below. Compound 1 was obtained from 3,4,5-tri­meth­oxy­benzoic acid by an amidation reaction using ethyl­chloro­formate as coupling agent. After oxidation of compound 1 alcohol function to an aldehyde, N-(6-compounds (2) and (3) were obtained. Compound 2 was synthesized by a reductive amination reaction using sodium tri­acet­oxy­borohydride as reducing agent. Compound 3 was synthesized using an ethano­lic solution of N-benzyl­hydroxyl­amine hydro­chloride.

1: N-(6-hy­droxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (1). Overall yield 82%; m.p. 393–399 K; crystallization solvent: ethyl acetate, to yield colourless needles.

2: N-(6-anilino­hexyl)-3,4,5-tri­meth­oxy­benzamide (2). Overall yield 51%; m.p. 376–388 K; crystallization solvent: ethyl acetate to yield colourless laths

3: N-(6,6-di­eth­oxy­hexyl)-3,4,5-tri­meth­oxy­benzamide (3). Overall yield 50%; m.p. 364–374 K; crystallization solvents: chloro­form/n-hexane to yield colourless needles.

Refinement details top

Crystal data, data collection and structure refinement details are summarized in Table 8. H atoms were treated as riding atoms with C—H(aromatic), 0.95 Å, with Uiso = 1.2Ueq(C), C—H2(methyl­ene), 0.99 Å, with Uiso = 1.2Ueq(C),C—H(methyl) 0.98 Å with Uiso = 1.5Ueq(C). N—H and O—H hydrogen atoms were refined.

Computing details top

For all compounds, data collection: CrystalClear-SM Expert (Rigaku, 2012). Cell refinement: CrysAlis PRO (Agilent, 2014) for (1), (2); CrystalClear-SM Expert (Rigaku, 2012) for (3). Data reduction: CrysAlis PRO (Agilent, 2014) for (1), (2); CrystalClear-SM Expert (Rigaku, 2012) for (3). Program(s) used to solve structure: SHELXT (Sheldrick, 2015a), PLATON (Spek, 2009), Flipper 25 (Oszlányi & Sütő, 2004) and OLEX2 (Dolomanov et al., 2009). for (1); SHELXT (Sheldrick, 2015a), PLATON (Spek, 2009), Flipper 25 (Oszlányi & Sütő, 2004) and OLEX2 (Dolomanov et al., 2009) for (2); OSCAIL (McArdle et al., 2004) and SHELXT (Sheldrick, 2015a) for (3). For all compounds, program(s) used to refine structure: OSCAIL (McArdle et al., 2004), ShelXle (Hübschle et al., 2011) and SHELXL2014 (Sheldrick, 2015b); molecular graphics: Mercury (Macrae et al., 2006); software used to prepare material for publication: OSCAIL (McArdle et al., 2004), SHELXL2014 (Sheldrick, 2015b) and PLATON (Spek, 2009).

Figures top
[Figure 1] Fig. 1. A view of the asymmetric unit of (1) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.
[Figure 2] Fig. 2. A view of the asymmetric unit of (2) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.
[Figure 3] Fig. 3. A view of the asymmetric unit of (3) with the atom-numbering scheme. Displacement ellipsoids are drawn at the 70% probability level.
[Figure 4] Fig. 4. Compound 1: view of the ribbon structure formed by the N12—H12···O11 and O19—H19···O19 hydrogen bonds. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) -x + 1, -y + 1/2, -z + 3/2; (ii) -x, -y - 1, -z + 1; (iii) -x + 1, -y - 1/2, -z + 3/2; (iv) -x + 1, -y + 1, -z + 1; (v) -x + 1, -y + 3/2, -z + 3/2.
[Figure 5] Fig. 5. Compound 2: the chain of rings formed by the interaction of the N12—H12···O11 and N19—H19···O4 hydrogen bonds. This chain extends along the c axis and is generated by the c-glideplane at y =1/4. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) x, -y - 1/2, z - 1/2; (ii) x, -y + 1/2, z + 1/2.
[Figure 6] Fig. 6. Compound 2: the simple C14 chain formed by the N12—H12···O11 hydrogen bond. This chain extends along the c axis and is generated by the c glideplane at y = 3/4. Hydrogen atoms not involved in the hydrogen bonding are omitted. Symmetry codes: (i) x, -y - 3/2, z - 1/2; (ii) x, -y - 1/2, z + 1/2.
[Figure 7] Fig. 7. View of the Hirshfeld surface mapped over dnorm for 1.
[Figure 8] Fig. 8. View of the Hirshfeld surface mapped over dnorm for 2.
[Figure 9] Fig. 9. View of the Hirshfeld surface mapped over dnorm for 3.
[Figure 10] Fig. 10. The full fingerprint (FP) plot showing various crystal packing interactions for 1. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.
[Figure 11] Fig. 11. The full fingerprint (FP) plot showing various crystal packing interactions for 2. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.
[Figure 12] Fig. 12. The full fingerprint (FP) plot showing various crystal packing interactions for 3. Dark blue corresponds to the low frequency of occurrence of a di/de pair, while light blue indicates a higher frequency for the occurrence.
(1) N-(6-Hydroxyhexyl)-3,4,5-trimethoxybenzamide top
Crystal data top
C16H25NO5F(000) = 672
Mr = 311.37Dx = 1.309 Mg m3
Monoclinic, P21/cMo Kα radiation, λ = 0.71073 Å
a = 22.3351 (18) ÅCell parameters from 4347 reflections
b = 5.0467 (4) Åθ = 2.8–27.5°
c = 14.2265 (10) ŵ = 0.10 mm1
β = 99.956 (7)°T = 100 K
V = 1579.4 (2) Å3Needle, colourless
Z = 40.15 × 0.02 × 0.01 mm
Data collection top
Rigaku AFC12
diffractometer
3627 independent reflections
Radiation source: Rotating Anode2039 reflections with I > 2σ(I)
Detector resolution: 28.5714 pixels mm-1Rint = 0.123
profile data from ω–scansθmax = 27.5°, θmin = 1.9°
Absorption correction: multi-scan
(CrysAlis PRO; Agilent, 2014)
h = 2928
Tmin = 0.803, Tmax = 1.000k = 66
19396 measured reflectionsl = 1818
Refinement top
Refinement on F20 restraints
Least-squares matrix: fullHydrogen site location: mixed
R[F2 > 2σ(F2)] = 0.062H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.133 w = 1/[σ2(Fo2) + (0.0434P)2 + 1.2336P]
where P = (Fo2 + 2Fc2)/3
S = 0.97(Δ/σ)max = 0.003
3626 reflectionsΔρmax = 0.25 e Å3
210 parametersΔρmin = 0.33 e Å3
Crystal data top
C16H25NO5V = 1579.4 (2) Å3
Mr = 311.37Z = 4
Monoclinic, P21/cMo Kα radiation
a = 22.3351 (18) ŵ = 0.10 mm1
b = 5.0467 (4) ÅT = 100 K
c = 14.2265 (10) Å0.15 × 0.02 × 0.01 mm
β = 99.956 (7)°
Data collection top
Rigaku AFC12
diffractometer
3627 independent reflections
Absorption correction: multi-scan
(CrysAlis PRO; Agilent, 2014)
2039 reflections with I > 2σ(I)
Tmin = 0.803, Tmax = 1.000Rint = 0.123
19396 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0620 restraints
wR(F2) = 0.133H atoms treated by a mixture of independent and constrained refinement
S = 0.97Δρmax = 0.25 e Å3
3626 reflectionsΔρmin = 0.33 e Å3
210 parameters
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
O30.14707 (8)0.7309 (4)0.17742 (12)0.0226 (5)
O40.06131 (7)0.3824 (4)0.14864 (12)0.0192 (4)
O50.07387 (7)0.0830 (4)0.00766 (11)0.0182 (4)
O110.29716 (8)0.7024 (4)0.14247 (12)0.0199 (4)
O190.49154 (9)0.5665 (4)0.70885 (12)0.0239 (5)
H190.4980 (17)0.729 (8)0.738 (3)0.071 (13)*
N120.29857 (10)0.2623 (5)0.17360 (15)0.0178 (5)
H120.2877 (13)0.124 (6)0.154 (2)0.026 (9)*
C10.22016 (11)0.4387 (5)0.05130 (16)0.0139 (6)
C20.21185 (11)0.6062 (5)0.02766 (16)0.0156 (6)
H20.24200.73310.03550.019*
C30.15876 (11)0.5858 (5)0.09520 (16)0.0160 (6)
C40.11325 (11)0.4077 (5)0.08137 (16)0.0157 (6)
C50.12136 (11)0.2437 (5)0.00138 (17)0.0144 (6)
C60.17580 (11)0.2542 (5)0.06407 (17)0.0152 (6)
H60.18250.13630.11690.018*
C110.27558 (11)0.4775 (5)0.12591 (17)0.0143 (6)
C130.34700 (11)0.2710 (6)0.25675 (17)0.0186 (6)
H13A0.35510.45750.27660.022*
H13B0.38470.19660.23970.022*
C140.32987 (11)0.1155 (6)0.33872 (17)0.0188 (6)
H14A0.31970.06820.31720.023*
H14B0.29300.19510.35680.023*
C150.38004 (12)0.1073 (5)0.42678 (17)0.0187 (6)
H15A0.36760.01650.47390.022*
H15B0.41750.03570.40780.022*
C160.39460 (12)0.3745 (5)0.47458 (18)0.0183 (6)
H16A0.35660.45570.48790.022*
H16B0.41160.49320.43040.022*
C170.43995 (11)0.3505 (5)0.56771 (17)0.0178 (6)
H17A0.42480.21750.60900.021*
H17B0.47920.28560.55330.021*
C180.45040 (12)0.6094 (6)0.62129 (17)0.0200 (6)
H18A0.46760.74160.58200.024*
H18B0.41130.67870.63480.024*
C310.19093 (12)0.9255 (6)0.19180 (19)0.0230 (7)
H31A0.17621.02340.25080.034*
H31B0.22940.83800.19680.034*
H31C0.19721.04870.13770.034*
C410.01986 (12)0.6026 (6)0.14884 (19)0.0222 (6)
H41A0.01460.58050.20110.033*
H41B0.04100.76840.15770.033*
H41C0.00510.60810.08790.033*
C510.07898 (12)0.0741 (6)0.09227 (18)0.0216 (6)
H51A0.04040.16520.09350.032*
H51B0.08870.04060.14840.032*
H51C0.11140.20530.09290.032*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
O30.0264 (10)0.0215 (12)0.0182 (9)0.0036 (9)0.0009 (8)0.0066 (8)
O40.0197 (10)0.0133 (11)0.0209 (9)0.0013 (8)0.0071 (8)0.0020 (8)
O50.0166 (9)0.0164 (11)0.0200 (9)0.0060 (8)0.0013 (7)0.0035 (8)
O110.0216 (10)0.0107 (10)0.0249 (10)0.0038 (8)0.0031 (8)0.0000 (8)
O190.0322 (11)0.0154 (12)0.0186 (10)0.0008 (9)0.0110 (8)0.0003 (9)
N120.0202 (12)0.0120 (14)0.0181 (12)0.0017 (11)0.0055 (9)0.0032 (10)
C10.0166 (13)0.0096 (15)0.0150 (12)0.0015 (11)0.0018 (10)0.0025 (10)
C20.0198 (14)0.0115 (14)0.0161 (12)0.0012 (12)0.0052 (11)0.0001 (11)
C30.0215 (14)0.0137 (15)0.0122 (12)0.0035 (12)0.0017 (10)0.0014 (11)
C40.0175 (14)0.0141 (14)0.0136 (12)0.0019 (12)0.0020 (10)0.0027 (11)
C50.0161 (13)0.0105 (14)0.0166 (13)0.0005 (11)0.0028 (10)0.0014 (11)
C60.0192 (13)0.0100 (14)0.0164 (13)0.0010 (11)0.0031 (11)0.0003 (11)
C110.0154 (13)0.0102 (14)0.0168 (13)0.0002 (11)0.0015 (10)0.0022 (11)
C130.0187 (14)0.0178 (16)0.0166 (13)0.0016 (12)0.0045 (11)0.0020 (11)
C140.0209 (14)0.0163 (15)0.0178 (13)0.0032 (12)0.0001 (11)0.0010 (12)
C150.0261 (15)0.0130 (15)0.0155 (13)0.0023 (12)0.0004 (11)0.0004 (11)
C160.0217 (14)0.0140 (15)0.0183 (13)0.0001 (12)0.0005 (11)0.0004 (11)
C170.0205 (14)0.0146 (16)0.0175 (13)0.0004 (12)0.0006 (11)0.0011 (11)
C180.0217 (14)0.0203 (16)0.0161 (13)0.0000 (13)0.0018 (11)0.0006 (12)
C310.0238 (15)0.0230 (17)0.0229 (14)0.0000 (13)0.0064 (12)0.0075 (13)
C410.0232 (15)0.0157 (16)0.0251 (14)0.0015 (13)0.0031 (12)0.0028 (12)
C510.0226 (14)0.0184 (16)0.0229 (14)0.0044 (13)0.0017 (11)0.0055 (12)
Geometric parameters (Å, º) top
O3—C31.366 (3)C14—C151.530 (3)
O3—C311.427 (3)C14—H14A0.9900
O4—C41.376 (3)C14—H14B0.9900
O4—C411.446 (3)C15—C161.520 (4)
O5—C51.359 (3)C15—H15A0.9900
O5—C511.429 (3)C15—H15B0.9900
O11—C111.240 (3)C16—C171.527 (3)
O19—C181.431 (3)C16—H16A0.9900
O19—H190.92 (4)C16—H16B0.9900
N12—C111.335 (3)C17—C181.510 (4)
N12—C131.459 (3)C17—H17A0.9900
N12—H120.77 (3)C17—H17B0.9900
C1—C21.393 (3)C18—H18A0.9900
C1—C61.394 (3)C18—H18B0.9900
C1—C111.498 (3)C31—H31A0.9800
C2—C31.395 (3)C31—H31B0.9800
C2—H20.9500C31—H31C0.9800
C3—C41.396 (4)C41—H41A0.9800
C4—C51.393 (3)C41—H41B0.9800
C5—C61.399 (3)C41—H41C0.9800
C6—H60.9500C51—H51A0.9800
C13—C141.509 (4)C51—H51B0.9800
C13—H13A0.9900C51—H51C0.9800
C13—H13B0.9900
C3—O3—C31117.22 (19)C16—C15—H15A108.7
C4—O4—C41113.10 (19)C14—C15—H15A108.7
C5—O5—C51117.44 (18)C16—C15—H15B108.7
C18—O19—H19107 (2)C14—C15—H15B108.7
C11—N12—C13123.6 (2)H15A—C15—H15B107.6
C11—N12—H12119 (2)C15—C16—C17112.1 (2)
C13—N12—H12117 (2)C15—C16—H16A109.2
C2—C1—C6120.8 (2)C17—C16—H16A109.2
C2—C1—C11118.1 (2)C15—C16—H16B109.2
C6—C1—C11120.9 (2)C17—C16—H16B109.2
C1—C2—C3119.3 (2)H16A—C16—H16B107.9
C1—C2—H2120.3C18—C17—C16113.0 (2)
C3—C2—H2120.3C18—C17—H17A109.0
O3—C3—C4115.4 (2)C16—C17—H17A109.0
O3—C3—C2124.3 (2)C18—C17—H17B109.0
C4—C3—C2120.2 (2)C16—C17—H17B109.0
O4—C4—C5119.2 (2)H17A—C17—H17B107.8
O4—C4—C3120.6 (2)O19—C18—C17109.2 (2)
C5—C4—C3120.2 (2)O19—C18—H18A109.8
O5—C5—C4116.0 (2)C17—C18—H18A109.8
O5—C5—C6124.2 (2)O19—C18—H18B109.8
C4—C5—C6119.8 (2)C17—C18—H18B109.8
C1—C6—C5119.6 (2)H18A—C18—H18B108.3
C1—C6—H6120.2O3—C31—H31A109.5
C5—C6—H6120.2O3—C31—H31B109.5
O11—C11—N12123.1 (2)H31A—C31—H31B109.5
O11—C11—C1120.1 (2)O3—C31—H31C109.5
N12—C11—C1116.9 (2)H31A—C31—H31C109.5
N12—C13—C14111.1 (2)H31B—C31—H31C109.5
N12—C13—H13A109.4O4—C41—H41A109.5
C14—C13—H13A109.4O4—C41—H41B109.5
N12—C13—H13B109.4H41A—C41—H41B109.5
C14—C13—H13B109.4O4—C41—H41C109.5
H13A—C13—H13B108.0H41A—C41—H41C109.5
C13—C14—C15113.5 (2)H41B—C41—H41C109.5
C13—C14—H14A108.9O5—C51—H51A109.5
C15—C14—H14A108.9O5—C51—H51B109.5
C13—C14—H14B108.9H51A—C51—H51B109.5
C15—C14—H14B108.9O5—C51—H51C109.5
H14A—C14—H14B107.7H51A—C51—H51C109.5
C16—C15—C14114.3 (2)H51B—C51—H51C109.5
C6—C1—C2—C30.9 (4)C3—C4—C5—C61.3 (4)
C11—C1—C2—C3175.9 (2)C2—C1—C6—C52.3 (4)
C31—O3—C3—C4176.7 (2)C11—C1—C6—C5172.6 (2)
C31—O3—C3—C23.5 (4)O5—C5—C6—C1175.8 (2)
C1—C2—C3—O3176.8 (2)C4—C5—C6—C13.4 (4)
C1—C2—C3—C43.0 (4)C13—N12—C11—O117.0 (4)
C41—O4—C4—C5108.9 (3)C13—N12—C11—C1171.3 (2)
C41—O4—C4—C374.4 (3)C2—C1—C11—O1132.3 (4)
O3—C3—C4—O41.2 (4)C6—C1—C11—O11142.8 (3)
C2—C3—C4—O4178.6 (2)C2—C1—C11—N12149.3 (2)
O3—C3—C4—C5177.9 (2)C6—C1—C11—N1235.6 (3)
C2—C3—C4—C51.9 (4)C11—N12—C13—C14129.1 (3)
C51—O5—C5—C4175.7 (2)N12—C13—C14—C15177.5 (2)
C51—O5—C5—C63.6 (4)C13—C14—C15—C1665.7 (3)
O4—C4—C5—O55.3 (4)C14—C15—C16—C17173.9 (2)
C3—C4—C5—O5178.0 (2)C15—C16—C17—C18174.4 (2)
O4—C4—C5—C6175.5 (2)C16—C17—C18—O19177.9 (2)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O19—H19···O19i0.92 (4)1.86 (4)2.7799 (14)176 (4)
N12—H12···O11ii0.77 (3)2.15 (3)2.859 (3)153 (3)
C18—H18B···O11iii0.992.643.614 (3)168
C41—H41B···O30.982.443.010 (3)117
Symmetry codes: (i) x+1, y+1/2, z+3/2; (ii) x, y1, z; (iii) x, y+3/2, z+1/2.
(2) N-(6-Anilinohexyl)-3,4,5-trimethoxybenzamide top
Crystal data top
C22H30N2O4F(000) = 832
Mr = 386.48Dx = 1.262 Mg m3
Monoclinic, P21/cMo Kα radiation, λ = 0.71075 Å
a = 11.5626 (8) ÅCell parameters from 12007 reflections
b = 19.5328 (9) Åθ = 2.2–27.6°
c = 9.5488 (7) ŵ = 0.09 mm1
β = 109.369 (8)°T = 100 K
V = 2034.5 (2) Å3Lath, colourless
Z = 40.25 × 0.08 × 0.02 mm
Data collection top
Rigaku AFC12
diffractometer
4655 independent reflections
Radiation source: Rotating Anode3869 reflections with I > 2σ(I)
Confocal mirrors, VHF Varimax monochromatorRint = 0.040
Detector resolution: 28.5714 pixels mm-1θmax = 27.5°, θmin = 1.9°
profile data from ω–scansh = 1515
Absorption correction: multi-scan
(CrysAlis PRO; Agilent, 2014)
k = 2525
Tmin = 0.384, Tmax = 1.000l = 1211
26057 measured reflections
Refinement top
Refinement on F20 restraints
Least-squares matrix: fullHydrogen site location: mixed
R[F2 > 2σ(F2)] = 0.041H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.105 w = 1/[σ2(Fo2) + (0.0498P)2 + 0.7227P]
where P = (Fo2 + 2Fc2)/3
S = 1.04(Δ/σ)max < 0.001
4652 reflectionsΔρmax = 0.32 e Å3
264 parametersΔρmin = 0.17 e Å3
Crystal data top
C22H30N2O4V = 2034.5 (2) Å3
Mr = 386.48Z = 4
Monoclinic, P21/cMo Kα radiation
a = 11.5626 (8) ŵ = 0.09 mm1
b = 19.5328 (9) ÅT = 100 K
c = 9.5488 (7) Å0.25 × 0.08 × 0.02 mm
β = 109.369 (8)°
Data collection top
Rigaku AFC12
diffractometer
4655 independent reflections
Absorption correction: multi-scan
(CrysAlis PRO; Agilent, 2014)
3869 reflections with I > 2σ(I)
Tmin = 0.384, Tmax = 1.000Rint = 0.040
26057 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0410 restraints
wR(F2) = 0.105H atoms treated by a mixture of independent and constrained refinement
S = 1.04Δρmax = 0.32 e Å3
4652 reflectionsΔρmin = 0.17 e Å3
264 parameters
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
O50.23589 (9)0.06242 (5)0.65347 (10)0.0233 (2)
O110.49022 (8)0.29229 (5)1.06168 (10)0.0206 (2)
O30.13699 (8)0.14104 (5)1.05838 (10)0.0199 (2)
O40.11195 (8)0.05052 (4)0.83767 (11)0.0214 (2)
N120.52046 (9)0.27467 (5)0.84328 (12)0.0166 (2)
H120.5016 (15)0.2521 (8)0.7605 (19)0.025 (4)*
N190.23085 (10)0.58041 (6)0.45509 (13)0.0219 (2)
H190.2032 (14)0.5397 (9)0.4356 (17)0.024 (4)*
C10.36942 (11)0.20559 (6)0.90565 (14)0.0161 (2)
C20.29676 (11)0.20182 (6)0.99581 (14)0.0165 (2)
H20.30760.23411.07350.020*
C30.20868 (11)0.15115 (6)0.97263 (14)0.0167 (3)
C40.19028 (11)0.10503 (6)0.85609 (14)0.0171 (3)
C50.26120 (11)0.10992 (6)0.76358 (14)0.0174 (3)
C60.35187 (11)0.15967 (6)0.78929 (14)0.0170 (3)
H60.40150.16230.72770.020*
C110.46561 (11)0.26090 (6)0.94280 (14)0.0158 (2)
C130.61401 (11)0.32767 (6)0.86549 (14)0.0179 (3)
H13A0.68820.30720.85270.021*
H13B0.63670.34500.96850.021*
C140.57161 (11)0.38743 (6)0.75829 (14)0.0180 (3)
H14A0.64260.41780.76880.022*
H14B0.54350.36940.65560.022*
C150.46909 (11)0.42972 (6)0.78092 (14)0.0182 (3)
H15A0.49700.44830.88320.022*
H15B0.39780.39960.77040.022*
C160.42906 (11)0.48867 (6)0.67131 (14)0.0186 (3)
H16A0.50160.51660.67560.022*
H16B0.39420.47000.56950.022*
C170.33424 (12)0.53406 (7)0.70390 (15)0.0220 (3)
H17A0.25970.50650.69170.026*
H17B0.36690.54870.80900.026*
C180.29791 (12)0.59736 (6)0.60736 (14)0.0206 (3)
H18A0.24670.62720.64680.025*
H18B0.37260.62320.61160.025*
C310.15479 (12)0.18615 (7)1.18125 (15)0.0213 (3)
H31A0.14260.23351.14570.032*
H31B0.23830.18081.25100.032*
H31C0.09570.17511.23150.032*
C410.01587 (12)0.06541 (8)0.79790 (18)0.0299 (3)
H41A0.06210.02250.78560.045*
H41B0.04270.09110.70450.045*
H41C0.03050.09280.87640.045*
C510.29185 (13)0.07190 (7)0.54292 (15)0.0270 (3)
H51A0.27160.11750.49900.040*
H51B0.26150.03710.46550.040*
H51C0.38100.06760.58810.040*
C1110.17742 (11)0.62986 (6)0.35170 (14)0.0182 (3)
C1120.10342 (11)0.61135 (7)0.20818 (14)0.0207 (3)
H1120.08950.56430.18260.025*
C1130.05055 (12)0.66108 (7)0.10363 (15)0.0237 (3)
H1130.00060.64780.00670.028*
C1140.06936 (12)0.73016 (7)0.13832 (16)0.0248 (3)
H1140.03200.76420.06640.030*
C1150.14307 (12)0.74837 (7)0.27873 (16)0.0241 (3)
H1150.15710.79550.30330.029*
C1160.19717 (12)0.69942 (6)0.38473 (15)0.0206 (3)
H1160.24820.71320.48080.025*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
O50.0305 (5)0.0196 (5)0.0232 (5)0.0041 (4)0.0135 (4)0.0067 (4)
O110.0256 (5)0.0205 (5)0.0192 (5)0.0044 (4)0.0119 (4)0.0032 (4)
O30.0215 (4)0.0213 (5)0.0210 (5)0.0044 (4)0.0123 (4)0.0027 (4)
O40.0191 (4)0.0145 (4)0.0320 (5)0.0016 (3)0.0101 (4)0.0009 (4)
N120.0199 (5)0.0155 (5)0.0164 (6)0.0004 (4)0.0087 (4)0.0000 (4)
N190.0273 (6)0.0138 (5)0.0216 (6)0.0013 (4)0.0039 (5)0.0010 (4)
C10.0176 (5)0.0150 (6)0.0162 (6)0.0027 (4)0.0062 (5)0.0036 (5)
C20.0188 (6)0.0154 (6)0.0159 (6)0.0014 (5)0.0066 (5)0.0002 (5)
C30.0176 (6)0.0168 (6)0.0175 (6)0.0030 (5)0.0083 (5)0.0036 (5)
C40.0171 (6)0.0125 (6)0.0213 (7)0.0004 (4)0.0059 (5)0.0028 (5)
C50.0210 (6)0.0146 (6)0.0165 (6)0.0035 (5)0.0060 (5)0.0001 (5)
C60.0198 (6)0.0169 (6)0.0165 (6)0.0025 (5)0.0091 (5)0.0022 (5)
C110.0175 (5)0.0148 (6)0.0161 (6)0.0033 (4)0.0068 (5)0.0025 (5)
C130.0170 (6)0.0175 (6)0.0212 (7)0.0002 (5)0.0090 (5)0.0029 (5)
C140.0194 (6)0.0165 (6)0.0203 (7)0.0004 (5)0.0095 (5)0.0029 (5)
C150.0186 (6)0.0174 (6)0.0202 (7)0.0003 (5)0.0085 (5)0.0019 (5)
C160.0202 (6)0.0180 (6)0.0184 (7)0.0012 (5)0.0076 (5)0.0017 (5)
C170.0237 (6)0.0231 (6)0.0212 (7)0.0053 (5)0.0098 (5)0.0044 (5)
C180.0229 (6)0.0183 (6)0.0207 (7)0.0029 (5)0.0075 (5)0.0000 (5)
C310.0209 (6)0.0254 (7)0.0213 (7)0.0025 (5)0.0120 (5)0.0036 (5)
C410.0184 (6)0.0284 (7)0.0415 (9)0.0027 (5)0.0082 (6)0.0028 (6)
C510.0351 (7)0.0280 (7)0.0206 (7)0.0021 (6)0.0130 (6)0.0066 (6)
C1110.0177 (6)0.0175 (6)0.0217 (7)0.0013 (5)0.0097 (5)0.0019 (5)
C1120.0218 (6)0.0207 (6)0.0217 (7)0.0000 (5)0.0100 (5)0.0014 (5)
C1130.0205 (6)0.0330 (7)0.0195 (7)0.0026 (5)0.0090 (5)0.0014 (6)
C1140.0241 (6)0.0274 (7)0.0270 (8)0.0075 (5)0.0139 (6)0.0109 (6)
C1150.0277 (7)0.0175 (6)0.0316 (8)0.0030 (5)0.0157 (6)0.0049 (5)
C1160.0224 (6)0.0179 (6)0.0229 (7)0.0004 (5)0.0093 (5)0.0001 (5)
Geometric parameters (Å, º) top
O5—C51.3594 (15)C15—H15B0.9900
O5—C511.4214 (16)C16—C171.5204 (17)
O11—C111.2374 (15)C16—H16A0.9900
O3—C31.3590 (14)C16—H16B0.9900
O3—C311.4266 (15)C17—C181.5159 (18)
O4—C41.3709 (14)C17—H17A0.9900
O4—C411.4286 (15)C17—H17B0.9900
N12—C111.3332 (15)C18—H18A0.9900
N12—C131.4610 (15)C18—H18B0.9900
N12—H120.867 (17)C31—H31A0.9800
N19—C1111.3729 (17)C31—H31B0.9800
N19—C181.4412 (17)C31—H31C0.9800
N19—H190.855 (17)C41—H41A0.9800
C1—C61.3894 (17)C41—H41B0.9800
C1—C21.3901 (16)C41—H41C0.9800
C1—C111.5061 (17)C51—H51A0.9800
C2—C31.3842 (17)C51—H51B0.9800
C2—H20.9500C51—H51C0.9800
C3—C41.3922 (17)C111—C1161.3963 (17)
C4—C51.3937 (17)C111—C1121.4011 (18)
C5—C61.3903 (17)C112—C1131.3816 (19)
C6—H60.9500C112—H1120.9500
C13—C141.5224 (17)C113—C1141.389 (2)
C13—H13A0.9900C113—H1130.9500
C13—H13B0.9900C114—C1151.376 (2)
C14—C151.5179 (16)C114—H1140.9500
C14—H14A0.9900C115—C1161.3821 (19)
C14—H14B0.9900C115—H1150.9500
C15—C161.5212 (17)C116—H1160.9500
C15—H15A0.9900
C5—O5—C51116.83 (10)C17—C16—H16B109.2
C3—O3—C31117.08 (10)C15—C16—H16B109.2
C4—O4—C41117.21 (10)H16A—C16—H16B107.9
C11—N12—C13122.94 (11)C18—C17—C16115.11 (11)
C11—N12—H12120.8 (11)C18—C17—H17A108.5
C13—N12—H12116.3 (11)C16—C17—H17A108.5
C111—N19—C18121.81 (11)C18—C17—H17B108.5
C111—N19—H19116.8 (10)C16—C17—H17B108.5
C18—N19—H19118.1 (10)H17A—C17—H17B107.5
C6—C1—C2120.20 (11)N19—C18—C17111.97 (11)
C6—C1—C11123.51 (11)N19—C18—H18A109.2
C2—C1—C11116.29 (11)C17—C18—H18A109.2
C3—C2—C1120.18 (11)N19—C18—H18B109.2
C3—C2—H2119.9C17—C18—H18B109.2
C1—C2—H2119.9H18A—C18—H18B107.9
O3—C3—C2124.83 (11)O3—C31—H31A109.5
O3—C3—C4115.18 (11)O3—C31—H31B109.5
C2—C3—C4119.98 (11)H31A—C31—H31B109.5
O4—C4—C3121.63 (11)O3—C31—H31C109.5
O4—C4—C5118.32 (11)H31A—C31—H31C109.5
C3—C4—C5119.75 (11)H31B—C31—H31C109.5
O5—C5—C6124.75 (11)O4—C41—H41A109.5
O5—C5—C4114.99 (11)O4—C41—H41B109.5
C6—C5—C4120.24 (11)H41A—C41—H41B109.5
C1—C6—C5119.60 (11)O4—C41—H41C109.5
C1—C6—H6120.2H41A—C41—H41C109.5
C5—C6—H6120.2H41B—C41—H41C109.5
O11—C11—N12122.34 (11)O5—C51—H51A109.5
O11—C11—C1119.91 (11)O5—C51—H51B109.5
N12—C11—C1117.74 (11)H51A—C51—H51B109.5
N12—C13—C14112.83 (10)O5—C51—H51C109.5
N12—C13—H13A109.0H51A—C51—H51C109.5
C14—C13—H13A109.0H51B—C51—H51C109.5
N12—C13—H13B109.0N19—C111—C116121.42 (12)
C14—C13—H13B109.0N19—C111—C112120.33 (12)
H13A—C13—H13B107.8C116—C111—C112118.23 (12)
C15—C14—C13114.46 (10)C113—C112—C111120.38 (12)
C15—C14—H14A108.6C113—C112—H112119.8
C13—C14—H14A108.6C111—C112—H112119.8
C15—C14—H14B108.6C112—C113—C114120.91 (13)
C13—C14—H14B108.6C112—C113—H113119.5
H14A—C14—H14B107.6C114—C113—H113119.5
C14—C15—C16112.81 (10)C115—C114—C113118.74 (12)
C14—C15—H15A109.0C115—C114—H114120.6
C16—C15—H15A109.0C113—C114—H114120.6
C14—C15—H15B109.0C114—C115—C116121.23 (13)
C16—C15—H15B109.0C114—C115—H115119.4
H15A—C15—H15B107.8C116—C115—H115119.4
C17—C16—C15112.09 (10)C115—C116—C111120.49 (13)
C17—C16—H16A109.2C115—C116—H116119.8
C15—C16—H16A109.2C111—C116—H116119.8
C6—C1—C2—C31.73 (18)C13—N12—C11—C1179.22 (10)
C11—C1—C2—C3177.93 (11)C6—C1—C11—O11167.75 (11)
C31—O3—C3—C20.16 (17)C2—C1—C11—O1111.89 (17)
C31—O3—C3—C4178.57 (11)C6—C1—C11—N1213.05 (17)
C1—C2—C3—O3176.80 (11)C2—C1—C11—N12167.30 (11)
C1—C2—C3—C41.87 (18)C11—N12—C13—C14112.80 (13)
C41—O4—C4—C367.59 (16)N12—C13—C14—C1566.85 (14)
C41—O4—C4—C5118.62 (13)C13—C14—C15—C16179.75 (11)
O3—C3—C4—O44.78 (17)C14—C15—C16—C17175.06 (11)
C2—C3—C4—O4174.01 (11)C15—C16—C17—C18175.02 (11)
O3—C3—C4—C5178.49 (11)C111—N19—C18—C17172.76 (11)
C2—C3—C4—C50.30 (18)C16—C17—C18—N1967.90 (15)
C51—O5—C5—C611.14 (18)C18—N19—C111—C1167.44 (18)
C51—O5—C5—C4170.38 (11)C18—N19—C111—C112174.08 (11)
O4—C4—C5—O56.04 (16)N19—C111—C112—C113179.39 (12)
C3—C4—C5—O5179.96 (11)C116—C111—C112—C1130.86 (18)
O4—C4—C5—C6172.51 (11)C111—C112—C113—C1140.06 (19)
C3—C4—C5—C61.41 (18)C112—C113—C114—C1150.76 (19)
C2—C1—C6—C50.02 (18)C113—C114—C115—C1160.52 (19)
C11—C1—C6—C5179.62 (11)C114—C115—C116—C1110.41 (19)
O5—C5—C6—C1179.95 (11)N19—C111—C116—C115179.61 (12)
C4—C5—C6—C11.55 (18)C112—C111—C116—C1151.09 (18)
C13—N12—C11—O110.05 (18)
Hydrogen-bond geometry (Å, º) top
Cg is the centroid of the C111–C116 ring.
D—H···AD—HH···AD···AD—H···A
N12—H12···O11i0.867 (17)2.052 (17)2.9051 (14)167.9 (15)
N19—H19···O4i0.855 (17)2.106 (17)2.9436 (15)166.3 (15)
C6—H6···O11i0.952.333.2356 (15)159
C41—H41C···O30.982.332.9287 (18)119
C112—H112···O4i0.952.653.3845 (16)134
C13—H13A···Cgii0.992.643.5272 (15)148
C31—H31C···Cgiii0.982.623.5205 (16)152
Symmetry codes: (i) x, y+1/2, z1/2; (ii) x+1, y+1, z+1; (iii) x, y1/2, z+3/2.
(3) N-(6,6-Diethoxyhexyl)-3,4,5-trimethoxybenzamide top
Crystal data top
C20H33NO6F(000) = 832
Mr = 383.47Dx = 1.236 Mg m3
Monoclinic, P21/cCu Kα radiation, λ = 1.5418 Å
a = 24.6345 (18) ÅCell parameters from 18993 reflections
b = 8.4646 (5) Åθ = 3.7–68.3°
c = 10.0598 (7) ŵ = 0.74 mm1
β = 100.851 (2)°T = 100 K
V = 2060.2 (2) Å3Needle, colourless
Z = 40.80 × 0.05 × 0.02 mm
Data collection top
Rigaku Saturn944+
diffractometer
3706 independent reflections
Radiation source: Sealed Tube3362 reflections with I > 2σ(I)
Confocal monochromatorRint = 0.037
Detector resolution: 22.2222 pixels mm-1θmax = 68.2°, θmin = 3.7°
profile data from ω–scansh = 2928
Absorption correction: multi-scan
(CrystalClear-SM Expert; Rigaku, 2012)
k = 1010
Tmin = 0.814, Tmax = 1.000l = 811
18993 measured reflections
Refinement top
Refinement on F20 restraints
Least-squares matrix: fullHydrogen site location: mixed
R[F2 > 2σ(F2)] = 0.035H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.095 w = 1/[σ2(Fo2) + (0.0504P)2 + 0.704P]
where P = (Fo2 + 2Fc2)/3
S = 1.05(Δ/σ)max = 0.004
3706 reflectionsΔρmax = 0.23 e Å3
253 parametersΔρmin = 0.28 e Å3
Crystal data top
C20H33NO6V = 2060.2 (2) Å3
Mr = 383.47Z = 4
Monoclinic, P21/cCu Kα radiation
a = 24.6345 (18) ŵ = 0.74 mm1
b = 8.4646 (5) ÅT = 100 K
c = 10.0598 (7) Å0.80 × 0.05 × 0.02 mm
β = 100.851 (2)°
Data collection top
Rigaku Saturn944+
diffractometer
3706 independent reflections
Absorption correction: multi-scan
(CrystalClear-SM Expert; Rigaku, 2012)
3362 reflections with I > 2σ(I)
Tmin = 0.814, Tmax = 1.000Rint = 0.037
18993 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0350 restraints
wR(F2) = 0.095H atoms treated by a mixture of independent and constrained refinement
S = 1.05Δρmax = 0.23 e Å3
3706 reflectionsΔρmin = 0.28 e Å3
253 parameters
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
O30.06047 (3)1.01933 (10)0.47561 (8)0.0216 (2)
O40.04431 (3)1.17888 (10)0.24751 (9)0.0238 (2)
O50.11083 (4)1.13704 (10)0.06165 (9)0.0262 (2)
O110.23438 (3)0.69400 (9)0.48281 (8)0.01775 (19)
O180.38282 (3)0.03224 (10)0.56738 (8)0.0217 (2)
O190.38224 (3)0.19607 (9)0.43634 (8)0.0226 (2)
N120.23993 (4)0.67500 (11)0.26098 (10)0.0171 (2)
H120.2298 (6)0.7133 (18)0.1814 (16)0.026 (4)*
C10.17484 (4)0.85971 (13)0.32763 (11)0.0151 (2)
C20.14072 (4)0.88484 (13)0.42145 (11)0.0161 (2)
H20.14760.83050.50560.019*
C30.09662 (5)0.98949 (13)0.39175 (12)0.0171 (2)
C40.08646 (5)1.07014 (13)0.26822 (12)0.0189 (3)
C50.12200 (5)1.04740 (13)0.17665 (12)0.0192 (3)
C60.16583 (5)0.94151 (13)0.20520 (12)0.0171 (2)
H60.18940.92510.14180.020*
C110.21940 (4)0.73742 (13)0.36342 (11)0.0144 (2)
C130.27693 (5)0.53875 (13)0.27617 (12)0.0179 (2)
H13A0.28700.50980.37300.021*
H13B0.31130.56630.24370.021*
C140.24913 (5)0.39825 (14)0.19562 (12)0.0191 (3)
H14A0.23630.43120.10050.023*
H14B0.21620.36720.23280.023*
C150.28700 (5)0.25481 (13)0.19823 (12)0.0191 (3)
H15A0.26830.17580.13270.023*
H15B0.32110.28820.16750.023*
C160.30308 (5)0.17604 (13)0.33596 (12)0.0200 (3)
H16A0.26930.14810.37050.024*
H16B0.32480.25100.40050.024*
C170.33722 (5)0.02709 (14)0.32709 (12)0.0201 (3)
H17A0.31590.04500.25910.024*
H17B0.37150.05660.29520.024*
C180.35258 (5)0.06007 (13)0.46037 (12)0.0195 (3)
H180.31760.09520.48820.023*
C310.07377 (5)0.95685 (17)0.60957 (12)0.0262 (3)
H31A0.07220.84120.60580.039*
H31B0.04720.99610.66290.039*
H31C0.11110.99030.65200.039*
C410.00213 (5)1.15608 (16)0.12914 (13)0.0277 (3)
H41A0.01581.19220.04890.042*
H41B0.03081.21680.13840.042*
H41C0.00731.04370.11950.042*
C510.14099 (6)1.10167 (16)0.04275 (13)0.0270 (3)
H51A0.13730.98900.06510.041*
H51B0.18011.12730.01140.041*
H51C0.12631.16440.12340.041*
C1100.38838 (6)0.30686 (15)0.54572 (13)0.0267 (3)
H11A0.35170.34270.56010.032*
H11B0.40810.25720.63030.032*
C1110.42100 (6)0.44433 (16)0.50818 (15)0.0331 (3)
H11C0.40180.49000.42270.050*
H11D0.42480.52450.57960.050*
H11E0.45780.40810.49780.050*
C1810.43434 (5)0.09299 (16)0.54379 (13)0.0272 (3)
H18A0.42790.18700.48430.033*
H18B0.45360.01200.49880.033*
C1820.46903 (6)0.13715 (18)0.67851 (15)0.0368 (3)
H18C0.50430.18140.66450.055*
H18D0.47600.04290.73570.055*
H18E0.44930.21590.72290.055*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
O30.0169 (4)0.0288 (5)0.0197 (4)0.0044 (3)0.0051 (3)0.0042 (3)
O40.0213 (4)0.0219 (4)0.0258 (5)0.0092 (3)0.0019 (4)0.0044 (3)
O50.0329 (5)0.0246 (4)0.0216 (5)0.0120 (4)0.0065 (4)0.0075 (3)
O110.0182 (4)0.0221 (4)0.0131 (4)0.0027 (3)0.0032 (3)0.0022 (3)
O180.0215 (4)0.0241 (4)0.0199 (4)0.0029 (3)0.0046 (3)0.0016 (3)
O190.0260 (5)0.0182 (4)0.0241 (5)0.0061 (3)0.0057 (4)0.0015 (3)
N120.0197 (5)0.0192 (5)0.0127 (5)0.0055 (4)0.0035 (4)0.0021 (4)
C10.0139 (5)0.0148 (5)0.0158 (6)0.0014 (4)0.0005 (4)0.0028 (4)
C20.0157 (5)0.0174 (5)0.0146 (6)0.0016 (4)0.0014 (4)0.0022 (4)
C30.0146 (5)0.0181 (5)0.0185 (6)0.0017 (4)0.0029 (4)0.0067 (4)
C40.0173 (6)0.0153 (5)0.0228 (6)0.0027 (4)0.0002 (5)0.0039 (4)
C50.0229 (6)0.0160 (5)0.0174 (6)0.0012 (4)0.0003 (5)0.0003 (4)
C60.0184 (6)0.0170 (5)0.0159 (6)0.0004 (4)0.0035 (4)0.0012 (4)
C110.0141 (5)0.0148 (5)0.0144 (6)0.0029 (4)0.0031 (4)0.0001 (4)
C130.0185 (6)0.0195 (6)0.0159 (6)0.0056 (4)0.0035 (4)0.0014 (4)
C140.0193 (6)0.0206 (6)0.0170 (6)0.0028 (5)0.0027 (4)0.0020 (5)
C150.0220 (6)0.0181 (6)0.0176 (6)0.0016 (5)0.0047 (5)0.0002 (4)
C160.0230 (6)0.0192 (6)0.0184 (6)0.0023 (5)0.0052 (5)0.0012 (5)
C170.0220 (6)0.0195 (6)0.0197 (6)0.0021 (5)0.0057 (5)0.0003 (5)
C180.0192 (6)0.0183 (6)0.0215 (6)0.0031 (4)0.0047 (5)0.0000 (5)
C310.0202 (6)0.0405 (7)0.0187 (6)0.0043 (5)0.0056 (5)0.0041 (5)
C410.0209 (6)0.0321 (7)0.0272 (7)0.0078 (5)0.0029 (5)0.0017 (5)
C510.0333 (7)0.0288 (6)0.0192 (6)0.0083 (5)0.0057 (5)0.0070 (5)
C1100.0304 (7)0.0231 (6)0.0253 (7)0.0039 (5)0.0021 (5)0.0056 (5)
C1110.0338 (8)0.0244 (7)0.0391 (8)0.0077 (6)0.0014 (6)0.0037 (6)
C1810.0264 (7)0.0269 (6)0.0292 (7)0.0011 (5)0.0078 (5)0.0020 (5)
C1820.0327 (8)0.0382 (8)0.0360 (8)0.0058 (6)0.0028 (6)0.0007 (6)
Geometric parameters (Å, º) top
O3—C31.3606 (14)C15—H15A0.9900
O3—C311.4272 (15)C15—H15B0.9900
O4—C41.3738 (14)C16—C171.5274 (15)
O4—C411.4385 (15)C16—H16A0.9900
O5—C51.3675 (14)C16—H16B0.9900
O5—C511.4279 (15)C17—C181.5146 (16)
O11—C111.2438 (14)C17—H17A0.9900
O18—C181.4220 (14)C17—H17B0.9900
O18—C1811.4302 (15)C18—H181.0000
O19—C181.4085 (14)C31—H31A0.9800
O19—C1101.4319 (15)C31—H31B0.9800
N12—C111.3390 (15)C31—H31C0.9800
N12—C131.4602 (14)C41—H41A0.9800
N12—H120.856 (16)C41—H41B0.9800
C1—C21.3932 (16)C41—H41C0.9800
C1—C61.3938 (16)C51—H51A0.9800
C1—C111.5024 (15)C51—H51B0.9800
C2—C31.3901 (16)C51—H51C0.9800
C2—H20.9500C110—C1111.5023 (18)
C3—C41.3986 (17)C110—H11A0.9900
C4—C51.3985 (17)C110—H11B0.9900
C5—C61.3909 (16)C111—H11C0.9800
C6—H60.9500C111—H11D0.9800
C13—C141.5268 (16)C111—H11E0.9800
C13—H13A0.9900C181—C1821.507 (2)
C13—H13B0.9900C181—H18A0.9900
C14—C151.5284 (15)C181—H18B0.9900
C14—H14A0.9900C182—H18C0.9800
C14—H14B0.9900C182—H18D0.9800
C15—C161.5214 (16)C182—H18E0.9800
C3—O3—C31117.13 (9)C18—C17—H17A108.9
C4—O4—C41116.31 (9)C16—C17—H17A108.9
C5—O5—C51117.14 (9)C18—C17—H17B108.9
C18—O18—C181115.25 (9)C16—C17—H17B108.9
C18—O19—C110112.74 (9)H17A—C17—H17B107.7
C11—N12—C13123.36 (10)O19—C18—O18111.37 (9)
C11—N12—H12118.9 (10)O19—C18—C17107.31 (9)
C13—N12—H12117.7 (10)O18—C18—C17114.24 (9)
C2—C1—C6120.44 (10)O19—C18—H18107.9
C2—C1—C11116.72 (10)O18—C18—H18107.9
C6—C1—C11122.80 (10)C17—C18—H18107.9
C3—C2—C1119.90 (10)O3—C31—H31A109.5
C3—C2—H2120.0O3—C31—H31B109.5
C1—C2—H2120.0H31A—C31—H31B109.5
O3—C3—C2124.15 (10)O3—C31—H31C109.5
O3—C3—C4115.58 (10)H31A—C31—H31C109.5
C2—C3—C4120.26 (10)H31B—C31—H31C109.5
O4—C4—C5122.78 (11)O4—C41—H41A109.5
O4—C4—C3117.74 (10)O4—C41—H41B109.5
C5—C4—C3119.25 (10)H41A—C41—H41B109.5
O5—C5—C6123.85 (11)O4—C41—H41C109.5
O5—C5—C4115.44 (10)H41A—C41—H41C109.5
C6—C5—C4120.70 (11)H41B—C41—H41C109.5
C5—C6—C1119.40 (10)O5—C51—H51A109.5
C5—C6—H6120.3O5—C51—H51B109.5
C1—C6—H6120.3H51A—C51—H51B109.5
O11—C11—N12122.70 (10)O5—C51—H51C109.5
O11—C11—C1120.36 (10)H51A—C51—H51C109.5
N12—C11—C1116.88 (10)H51B—C51—H51C109.5
N12—C13—C14110.54 (9)O19—C110—C111107.35 (11)
N12—C13—H13A109.5O19—C110—H11A110.2
C14—C13—H13A109.5C111—C110—H11A110.2
N12—C13—H13B109.5O19—C110—H11B110.2
C14—C13—H13B109.5C111—C110—H11B110.2
H13A—C13—H13B108.1H11A—C110—H11B108.5
C13—C14—C15113.47 (9)C110—C111—H11C109.5
C13—C14—H14A108.9C110—C111—H11D109.5
C15—C14—H14A108.9H11C—C111—H11D109.5
C13—C14—H14B108.9C110—C111—H11E109.5
C15—C14—H14B108.9H11C—C111—H11E109.5
H14A—C14—H14B107.7H11D—C111—H11E109.5
C16—C15—C14114.66 (9)O18—C181—C182108.10 (11)
C16—C15—H15A108.6O18—C181—H18A110.1
C14—C15—H15A108.6C182—C181—H18A110.1
C16—C15—H15B108.6O18—C181—H18B110.1
C14—C15—H15B108.6C182—C181—H18B110.1
H15A—C15—H15B107.6H18A—C181—H18B108.4
C15—C16—C17111.13 (9)C181—C182—H18C109.5
C15—C16—H16A109.4C181—C182—H18D109.5
C17—C16—H16A109.4H18C—C182—H18D109.5
C15—C16—H16B109.4C181—C182—H18E109.5
C17—C16—H16B109.4H18C—C182—H18E109.5
H16A—C16—H16B108.0H18D—C182—H18E109.5
C18—C17—C16113.51 (10)
C6—C1—C2—C31.44 (16)C11—C1—C6—C5176.84 (10)
C11—C1—C2—C3176.27 (10)C13—N12—C11—O117.15 (17)
C31—O3—C3—C29.59 (16)C13—N12—C11—C1170.25 (10)
C31—O3—C3—C4171.49 (10)C2—C1—C11—O1118.88 (15)
C1—C2—C3—O3178.65 (10)C6—C1—C11—O11163.47 (10)
C1—C2—C3—C40.23 (16)C2—C1—C11—N12158.58 (10)
C41—O4—C4—C561.51 (15)C6—C1—C11—N1219.07 (15)
C41—O4—C4—C3124.05 (12)C11—N12—C13—C14114.65 (12)
O3—C3—C4—O44.74 (15)N12—C13—C14—C15175.72 (9)
C2—C3—C4—O4176.30 (10)C13—C14—C15—C1667.27 (13)
O3—C3—C4—C5179.37 (10)C14—C15—C16—C17175.71 (10)
C2—C3—C4—C51.66 (17)C15—C16—C17—C18177.76 (10)
C51—O5—C5—C69.66 (17)C110—O19—C18—O1867.61 (12)
C51—O5—C5—C4171.35 (11)C110—O19—C18—C17166.69 (10)
O4—C4—C5—O52.29 (16)C181—O18—C18—O1962.01 (12)
C3—C4—C5—O5176.64 (10)C181—O18—C18—C1759.76 (13)
O4—C4—C5—C6176.74 (10)C16—C17—C18—O19178.26 (9)
C3—C4—C5—C62.39 (17)C16—C17—C18—O1857.77 (13)
O5—C5—C6—C1177.74 (10)C18—O19—C110—C111179.38 (10)
C4—C5—C6—C11.20 (17)C18—O18—C181—C182160.85 (10)
C2—C1—C6—C50.72 (16)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N12—H12···O11i0.856 (16)2.169 (16)2.9890 (13)160.2 (14)
C6—H6···O11i0.952.343.2549 (14)162
C15—H15B···O18ii0.992.493.4239 (14)157
Symmetry codes: (i) x, y+3/2, z1/2; (ii) x, y+1/2, z1/2.
Selected torsion angles (º) for (1) top
C31—O3—C3—C4176.7 (2)C6—C1—C11—N1235.6 (3)
C31—O3—C3—C23.5 (4)C11—N12—C13—C14129.1 (3)
C41—O4—C4—C5108.9 (3)N12—C13—C14—C15177.5 (2)
C41—O4—C4—C374.4 (3)C13—C14—C15—C1665.7 (3)
C51—O5—C5—C4175.7 (2)C14—C15—C16—C17173.9 (2)
C51—O5—C5—C63.6 (4)C15—C16—C17—C18174.4 (2)
C13—N12—C11—C1171.3 (2)C16—C17—C18—O19177.9 (2)
C2—C1—C11—N12149.3 (2)
Selected torsion angles (º) for (2) top
C31—O3—C3—C20.16 (17)C2—C1—C11—N12167.30 (11)
C31—O3—C3—C4178.57 (11)C11—N12—C13—C14112.80 (13)
C41—O4—C4—C367.59 (16)N12—C13—C14—C1566.85 (14)
C41—O4—C4—C5118.62 (13)C13—C14—C15—C16179.75 (11)
C51—O5—C5—C611.14 (18)C14—C15—C16—C17175.06 (11)
C51—O5—C5—C4170.38 (11)C15—C16—C17—C18175.02 (11)
C13—N12—C11—C1179.22 (10)C111—N19—C18—C17172.76 (11)
C6—C1—C11—N1213.05 (17)C16—C17—C18—N1967.90 (15)
Selected torsion angles (º) for (3) top
C31—O3—C3—C29.59 (16)C2—C1—C11—N12158.58 (10)
C31—O3—C3—C4171.49 (10)C6—C1—C11—N1219.07 (15)
C41—O4—C4—C561.51 (15)C11—N12—C13—C14114.65 (12)
C41—O4—C4—C3124.05 (12)N12—C13—C14—C15175.72 (9)
C51—O5—C5—C69.66 (17)C13—C14—C15—C1667.27 (13)
C51—O5—C5—C4171.35 (11)C14—C15—C16—C17175.71 (10)
C13—N12—C11—C1170.25 (10)C15—C16—C17—C18177.76 (10)
Hydrogen-bond geometry (Å, º) for (1) top
D—H···AD—HH···AD···AD—H···A
O19—H19···O19i0.92 (4)1.86 (4)2.7799 (14)176 (4)
N12—H12···O11ii0.77 (3)2.15 (3)2.859 (3)153 (3)
C18—H18B···O11iii0.992.643.614 (3)168
C41—H41B···O30.982.443.010 (3)117
Symmetry codes: (i) x+1, y+1/2, z+3/2; (ii) x, y1, z; (iii) x, y+3/2, z+1/2.
Hydrogen-bond geometry (Å, º) for (2) top
Cg is the centroid of the C111–C116 ring.
D—H···AD—HH···AD···AD—H···A
N12—H12···O11i0.867 (17)2.052 (17)2.9051 (14)167.9 (15)
N19—H19···O4i0.855 (17)2.106 (17)2.9436 (15)166.3 (15)
C6—H6···O11i0.952.333.2356 (15)159
C41—H41C···O30.982.332.9287 (18)119
C112—H112···O4i0.952.653.3845 (16)134
C13—H13A···Cgii0.992.643.5272 (15)148
C31—H31C···Cgiii0.982.623.5205 (16)152
Symmetry codes: (i) x, y+1/2, z1/2; (ii) x+1, y+1, z+1; (iii) x, y1/2, z+3/2.
Hydrogen-bond geometry (Å, º) for (3) top
D—H···AD—HH···AD···AD—H···A
N12—H12···O11i0.856 (16)2.169 (16)2.9890 (13)160.2 (14)
C6—H6···O11i0.952.343.2549 (14)162
C15—H15B···O18ii0.992.493.4239 (14)157
Symmetry codes: (i) x, y+3/2, z1/2; (ii) x, y+1/2, z1/2.
The percentages of (O/N/C)–H···O and C—H···C contacts top
Contact123
H···H60.060.868.9
H···O/O···H25.416.019.0
H···C/C···H13.021.410.05
H···N/N···H0.031.70.8

Experimental details

(1)(2)(3)
Crystal data
Chemical formulaC16H25NO5C22H30N2O4C20H33NO6
Mr311.37386.48383.47
Crystal system, space groupMonoclinic, P21/cMonoclinic, P21/cMonoclinic, P21/c
Temperature (K)100100100
a, b, c (Å)22.3351 (18), 5.0467 (4), 14.2265 (10)11.5626 (8), 19.5328 (9), 9.5488 (7)24.6345 (18), 8.4646 (5), 10.0598 (7)
β (°) 99.956 (7) 109.369 (8) 100.851 (2)
V3)1579.4 (2)2034.5 (2)2060.2 (2)
Z444
Radiation typeMo KαMo KαCu Kα
µ (mm1)0.100.090.74
Crystal size (mm)0.15 × 0.02 × 0.010.25 × 0.08 × 0.020.80 × 0.05 × 0.02
Data collection
DiffractometerRigaku AFC12Rigaku AFC12Rigaku Saturn944+
Absorption correctionMulti-scan
(CrysAlis PRO; Agilent, 2014)
Multi-scan
(CrysAlis PRO; Agilent, 2014)
Multi-scan
(CrystalClear-SM Expert; Rigaku, 2012)
Tmin, Tmax0.803, 1.0000.384, 1.0000.814, 1.000
No. of measured, independent and
observed [I > 2σ(I)] reflections
19396, 3627, 2039 26057, 4655, 3869 18993, 3706, 3362
Rint0.1230.0400.037
(sin θ/λ)max1)0.6490.6490.602
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.062, 0.133, 0.97 0.041, 0.105, 1.04 0.035, 0.095, 1.05
No. of reflections362646523706
No. of parameters210264253
H-atom treatmentH atoms treated by a mixture of independent and constrained refinementH atoms treated by a mixture of independent and constrained refinementH atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å3)0.25, 0.330.32, 0.170.23, 0.28

Computer programs: CrystalClear-SM Expert (Rigaku, 2012), CrysAlis PRO (Agilent, 2014), SHELXT (Sheldrick, 2015a), PLATON (Spek, 2009), Flipper 25 (Oszlányi & Sütő, 2004) and OLEX2 (Dolomanov et al., 2009)., Flipper 25 (Oszlányi & Sütő, 2004) and OLEX2 (Dolomanov et al., 2009), OSCAIL (McArdle et al., 2004) and SHELXT (Sheldrick, 2015a), OSCAIL (McArdle et al., 2004), ShelXle (Hübschle et al., 2011) and SHELXL2014 (Sheldrick, 2015b), Mercury (Macrae et al., 2006), SHELXL2014 (Sheldrick, 2015b) and PLATON (Spek, 2009).

 

Acknowledgements

The authors thank the staff at the National Crystallographic Service, University of Southampton, for the data collection, help and advice (Coles & Gale, 2012[Coles, S. J. & Gale, P. A. (2012). Chem. Sci. 3, 683-689.]), and the Foundation for Science and Technology (FCT) of Portugal (QUI/UI0081/2015) for financial support. Grants to CO (SFRH/BD/88773/2012) and FC (SFRH/BPD/72923/2010) are supported by FCT, POPH and QREN.

References

First citationAgilent (2014). CrysAlis PRO. Agilent Technologies UK Ltd, Yarnton, England.  Google Scholar
First citationBenfeito, S., Oliveira, C., Soares, P., Fernandes, C., Silva, T., Teixeira, J. & Borges, F. (2013). Mitochondrion, 13, 427–435.  Web of Science CrossRef CAS PubMed Google Scholar
First citationColes, S. J. & Gale, P. A. (2012). Chem. Sci. 3, 683–689.  Web of Science CSD CrossRef CAS Google Scholar
First citationDillen, J., Woldu, M. G. & Koch, K. R. (2006). Acta Cryst. E62, o5225–o5227.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationDolomanov, O. V., Bourhis, L. J., Gildea, R. J., Howard, J. A. K. & Puschmann, H. (2009). J. Appl. Cryst. 42, 339–341.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationGarrido, J. & Borges, F. (2013). Food. Res. Int. 54, 1844–1858.  CrossRef Google Scholar
First citationGroom, C. R., Bruno, I. J., Lightfoot, M. P. & Ward, S. C. (2016). Acta Cryst. B72, 171–179.  CSD CrossRef IUCr Journals Google Scholar
First citationHübschle, C. B., Sheldrick, G. M. & Dittrich, B. (2011). J. Appl. Cryst. 44, 1281–1284.  Web of Science CrossRef IUCr Journals Google Scholar
First citationMacrae, C. F., Edgington, P. R., McCabe, P., Pidcock, E., Shields, G. P., Taylor, R., Towler, M. & van de Streek, J. (2006). J. Appl. Cryst. 39, 453–457.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationMcArdle, P., Gilligan, K., Cunningham, D., Dark, R. & Mahon, M. (2004). CrystEngComm, 6, 303–309.  Web of Science CSD CrossRef CAS Google Scholar
First citationOszlányi, G. & Sütő, A. (2004). Acta Cryst. A60, 134–141.  Web of Science CrossRef IUCr Journals Google Scholar
First citationRigaku (2012). CrystalClear-SM Expert. Rigaku Corporation, Tokyo, Japan.  Google Scholar
First citationRohl, A. L., Moret, M., Kaminsky, W., Claborn, K., McKinnon, J. J. & Kahr, B. (2008). Cryst. Growth Des. 8, 4517–4525.  Web of Science CSD CrossRef CAS Google Scholar
First citationRoleira, F. M. F., Tavares-da-Silva, E. J., Varela, C. L., Costa, S. C., Silva, T., Garrido, J. & Borges, F. (2015). Food Chem. 183, 235–258.  Web of Science CrossRef CAS PubMed Google Scholar
First citationSheldrick, G. M. (2015a). Acta Cryst. A71, 3–8.  Web of Science CrossRef IUCr Journals Google Scholar
First citationSheldrick, G. M. (2015b). Acta Cryst. C71, 3–8.  Web of Science CrossRef IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSun, Y.-F., Sun, X.-Z., Li, J.-K. & Zheng, Z.-B. (2007). Acta Cryst. E63, o2180–o2181.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationTeixeira, J., Silva, T., Andrade, P. B. & Borges, F. (2013). Curr. Med. Chem. 20, 2939–2952.  CrossRef CAS PubMed Google Scholar
First citationTsuzuki, S., Houjou, H., Nagawa, & Hiratani, K. (2002). J. Chem. Soc. Perkin Trans. 2, pp. 1271–1273.  Google Scholar
First citationWolff, S. K., Grimwood, D. J., McKinnon, J. J., Turner, M. J., Jayatilaka, D. & Spackman, M. A. (2012). Crystal Explorer. The University of Western Australia.  Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Volume 72| Part 5| May 2016| Pages 675-682
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds