Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
The crystal structure of zirconium oxide nanoparticles was refined by the Rietveld analysis of synchrotron X-ray powder diffraction data measured at 298 K. In the nanoparticles, two phases of tetragonal ZrO2 − δ (average particle size: 11 ± 2 nm) and monoclinic ZrO2 (average particle size: 24 ± 4 nm) existed, where the weight fractions were estimated to be 84.9 and 15.1 wt%, respectively. The structural refinement suggests that the tetragonal ZrO2 − δ has an oxygen deficiency [δ = 0.031 (7)] and that the monoclinic ZrO2 − δ has less oxygen deficiency (δ ≃ 0), where δ is the vacancy concentration. The monoclinic ZrO2 has a larger unit-cell volume. The maximum-entropy method analysis indicated covalent bonding between Zr and O atoms.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S0108768105030570/og5013sup1.cif
Contains datablocks global, I, VICS_phase_1

rtv

Rietveld powder data file (CIF format) https://doi.org/10.1107/S0108768105030570/og5013Isup2.rtv
Contains datablock I

txt

Text file https://doi.org/10.1107/S0108768105030570/og5013sup3.txt
Pattern fitting structure data

Experimental top

Precursor sols were prepared from a mixture of 70 wt% zirconium (IV) propoxide 1-propanol solution and 98 wt% triethanolamine. The sols were hydrolyzed with half volume of water in a Teflon-lined autoclave at 110 oC for 24 h and then at 120 oC for 120 h. A white fine powder was separated from the mother solution by a centrifuge and rinsed several times with ethanol. In order to obtain zirconium oxide nanocrystallites, the ethanol sol was dried in air on a quartz plate at 125 oC for 22 h(Tsunekawa et al., 2005b).

Refinement top

The crystal structure of the zirconium oxide nanocrystallites was refined by the Rietveld method with a computer program RIETAN-2000 (Izumi & Ikeda, 2000).

Computing details top

Data collection: RIGAKU software (Toraya et al., 1996) for (I). Cell refinement: RIETAN-2000 (Izumi and Ikeda, 2000) for (I). Program(s) used to solve structure: RIETAN-2000 for (I). Program(s) used to refine structure: RIETAN-2000 for (I). Molecular graphics: VENUS [Izumi and Dilanian (2002)] for (I).

Figures top
[Figure 1] Fig. 1. Rietveld refinement of the synchrotron X-ray powder diffraction data of the zirconium oxide nanoparticles. Magnified view of the peak profile in the 2 range from 80 to 140 °. is inserted. Red points and green line denote the observed and calculated intensities, respectively. The difference between the observed and calculated intensities is drawn by a blue line below the profile. Up and down green short verticals denote the calculated peak positions of the monoclinic and tetragonal phases, respectively.
[Figure 2] Fig. 2. (A) Refined crystal structure and equi-electron-density surfaces (B) at 10 and (C) at 1 ?-3 of the tetragonal zirconium oxide nanoparticles. Two bond lengths between the cation and anion are R = 2.3562 (6) ? and r = 2.0805 (5) ?. Arrows stand for the displacements of oxygen atoms along the c axis (0.237 (1) ?).
(I) zirconium oxide top
Crystal data top
O2xZrDx = 6.159 Mg m3
Mr = 246.49Monochromatized synchrotron X-ray 1.20200 radiation, λ = 1.20200 Å
Tetragonal, P42/nmcT = 298 K
a = 3.58651 (8) ÅParticle morphology: plate-like
c = 5.16658 (15) Åwhite
V = 66.46 (1) Å3flat sheet, 12 × 12 mm
Z = 2Specimen preparation: Prepared at 398 K
F(000) = 111.192
Data collection top
A multiple-detector system with Ge(111) analyzer crystals, Soller slits and scintillation counters (Toraya et al., 1996)
diffractometer
Data collection mode: reflection
Radiation source: synchrotron X-rayScan method: step
Ge(111) analyzer crystals monochromator2θmin = 10.501°, 2θmax = 154.808°, 2θstep = 0.01°
Specimen mounting: packed powder pellet
Refinement top
Rp = 0.047Profile function: a split-type Pearson VII (Toraya, 1990)
Rwp = 0.06157 (13 for structural parameters) parameters
Rexp = 0.063
RBragg = 0.009Background function: twelve-parameter polynomial in 2thetan, where n has values between 0 and 11
χ2 = 1.690Preferred orientation correction: no
14432 data points
Crystal data top
O2xZrV = 66.46 (1) Å3
Mr = 246.49Z = 2
Tetragonal, P42/nmcMonochromatized synchrotron X-ray 1.20200 radiation, λ = 1.20200 Å
a = 3.58651 (8) ÅT = 298 K
c = 5.16658 (15) Åflat sheet, 12 × 12 mm
Data collection top
A multiple-detector system with Ge(111) analyzer crystals, Soller slits and scintillation counters (Toraya et al., 1996)
diffractometer
Scan method: step
Specimen mounting: packed powder pellet2θmin = 10.501°, 2θmax = 154.808°, 2θstep = 0.01°
Data collection mode: reflection
Refinement top
Rp = 0.047χ2 = 1.690
Rwp = 0.06114432 data points
Rexp = 0.06357 (13 for structural parameters) parameters
RBragg = 0.009
Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/UeqOcc. (<1)
Zr0.994Hf0.0060000.385 (1)*
O00.50.2042 (2)0.934 (17)*0.984 (4)
Bond lengths (Å) top
M—O2.3562 (6)M—O2.0805 (5)
(VICS_phase_1) top
Crystal data top
?β = 90°
Mr = ?γ = 90°
?, P42/nmcV = ? Å3
a = 3.58651 (8) ÅZ = ?
b = 3.58651 (8) Å? radiation, λ = ? Å
c = 5.16658 (8) Å × × mm
α = 90°
Data collection top
h = ??l = ??
k = ??
Refinement top
Crystal data top
?β = 90°
Mr = ?γ = 90°
?, P42/nmcV = ? Å3
a = 3.58651 (8) ÅZ = ?
b = 3.58651 (8) Å? radiation, λ = ? Å
c = 5.16658 (8) Å × × mm
α = 90°
Data collection top
Refinement top
Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzBiso*/BeqOcc. (<1)
Zr0000.385 (1)*
O00.500000.2041 (3)0.934 (17)*0.984 (4)

Experimental details

(I)(VICS_phase_1)
Crystal data
Chemical formulaO2xZr?
Mr246.49?
Crystal system, space groupTetragonal, P42/nmc?, P42/nmc
Temperature (K)298?
a, c (Å)3.58651 (8), 5.16658 (15)3.58651 (8), 5.16658 (8)
V3)66.46 (1)?
Z2?
Radiation typeMonochromatized synchrotron X-ray 1.20200, λ = 1.20200 Å?, λ = ? Å
µ (mm1)?
Specimen shape, size (mm)Flat sheet, 12 × 12 × ×
Data collection
DiffractometerA multiple-detector system with Ge(111) analyzer crystals, Soller slits and scintillation counters (Toraya et al., 1996)
diffractometer
?
Specimen mountingPacked powder pellet
Data collection modeReflection
Data collection methodStep?
Absorption correction?
No. of measured, independent and
observed reflections
?, ?, ?
Rint?
θ values (°)2θmin = 10.501 2θmax = 154.808 2θstep = 0.01θmax = ?
Refinement
R factors and goodness of fitRp = 0.047, Rwp = 0.061, Rexp = 0.063, RBragg = 0.009, χ2 = 1.690R[F2 > 2σ(F2)] = ?, wR(F2) = ?, S = ?
No. of reflections/data points14432?
No. of parameters57 (13 for structural parameters)?
No. of restraints??
Δρmax, Δρmin (e Å3)?, ?

Computer programs: RIGAKU software (Toraya et al., 1996), RIETAN-2000 (Izumi and Ikeda, 2000), RIETAN-2000, VENUS [Izumi and Dilanian (2002)].

Selected bond lengths (Å) for (I) top
M—O2.3562 (6)M—O2.0805 (5)
 

Subscribe to Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow Acta Cryst. B
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds