research papers\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoSTRUCTURAL SCIENCE
CRYSTAL ENGINEERING
MATERIALS
ISSN: 2052-5206

Temperature effects on the hydrogen-bond patterns in 4-piperidine­carboxylic acid

CROSSMARK_Color_square_no_text.svg

aLaboratorio de Cristalografía, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes 5101, Venezuela, bEuropean Synchotron Radiation Facility, BP 220, F-38043 Grenoble CEDEX, France, and cDepartment of Chemistry, Keele University, Staffordshire ST5 5BG, England
*Correspondence e-mail: asiloe@ula.ve

(Received 16 September 2004; accepted 30 November 2004)

A temperature-controlled X-ray powder diffraction experiment, complemented with TGA and DSC analysis, allowed us to follow changes in the molecular conformation and hydrogen-bond patterns of 4-piperidinecarboxylic acid. The presence of three phases is confirmed. Phase 1 represents the monohydrated form of 4-piperidinecarboxylic acid, which exists from room temperature to 359 K, where dehydration occurs. Phase 2 measured at 363 K corresponds to an anhydrous form of the acid. At ca 458 K the onset of a second, more gradual transition is observed, which ends at around 543 K. Phase 3 measured at 543 K is a high-temperature anhydrous form of the acid. The structures of phases 2 and 3 were solved from synchrotron powder diffraction data by simulated annealing using the DASH program and refined by the Rietveld method. The phase changes are accompanied by modification of the hydrogen-bond patterns and of the torsional orientation of the terminal carboxylate group. This group makes a 49° rotation about the C1—C2 bond during the first transition.

1. Introduction

Cooperative effects are involved in the formation of extended patterns of hydrogen bonds. In amino acids these effects are significant in the solid state and arise from a combination of polarization and charge transfer effects owing to the presence of strong carboxylate–amino (—COO+HN—) intermolecular interactions (Glusker, 1996[Glusker, J. P. (1996). The Crystal as a Supramolecular Entity, Vol. 2, edited by G. R. Desiraju, ch. 6. London: John Wiley and Sons.]). The introduction of a polar medium, such as water, contributes further to the stabilization, as theoretical studies seem to point out, such as calculations performed on glycine (Jensen & Gordon, 1995[Jensen, J. H. & Gordon, M. S. (1995). J. Am. Chem. Soc. 117, 8159-8170.]), alanine (Tajkhorshid et al., 1998[Tajkhorshid, E., Jalkanen, K. J. & Suhai, J. S. (1998). Phys. Chem. B, 102, 5899-5913.]), aspartic acid (Nagy & Noszl, 2000[Nagy, P. I. & Noszl, B. (2000). J. Phys. Chem. A, 104, 6834-6843.]) and 2-piperidine-carboxylic acid (Cuervo et al., 2002[Cuervo, J., Rincón, L., Almeida, R., Mora, A. J., Delgado, G. & Bahsas, A. (2002). J. Mol. Struct. 615, 191-199.]), in which water molecules were explicitly placed near the amino acids. Often amino acids crystallize as hydrates and the water itself is involved in the hydrogen-bond schemes. In such cases the presence of carboxylate–water (—COO⋯H2O) and amino–water (—NH+⋯H2O) interactions are likely to induce changes in the structural conformation and functionality of amino acids. In a previous study (Mora et al., 2002[Mora, A. J., Delgado, G., Ramírez, B., Cuervo, J., Rincón, L., Almeida R. & Bashas, A. (2002). J. Mol. Struct. 615, 201-208.]) we investigated the room-temperature structure of 4-piperidinecarboxylic acid in its hydrate form by means of single-crystal X-ray diffraction and solid-state NMR, focusing on the role played by hydrogen bonds. Semi-empirical calculations allowed us to evaluate the energies of formation of the two types of supramolecular structures present in the crystalline state of 4-piperidienecarboxylic acid: Extended chains of amino acid molecules linked by amino–carboxylate interactions, and extended bent chains of amino acid molecules intercalated with water molecules held together by carboxy­late–water interactions. The theoretical calculations show large cooperative effects for the first type of chain, but they are less significant for those involving water molecules. This result is supported by the fact that in the hydrogen bonds formed in these chains, the water molecule acts only as a double donor of H atoms and not as a double donor–double acceptor as seen in clusters of water (Rincón et al., 2001[Rincón, L., Almeida, R., García-Aldea, D. & Diez y Riega, H. (2001). J. Chem. Phys. 114, 5552-5563.]), water–methanol (Mó et al., 1992[Mó, O., Yañez, M. & Elguero, J. (1992). J. Chem. Phys. 97, 6628-6638.]) and hydrogen peroxide–water (Mó et al., 1994[Mó, O., Yañez, M., Rozas, J. & Elguero, J. (1994). Chem. Phys. Lett. 219, 45-52.]). At this point the need was evident to perform experiments to follow changes induced in the structure and the hydrogen bonds by temperature increments. Here we report the results of TGA (thermal gravimetric analysis), DSC (differential scanning calorimetry) and temperature-controlled X-ray powder diffraction experiments performed on 4-piperidinecarboxylic acid monohydrate.

2. Experimental

Thermogravimetric Analysis (TGA) of 4-piperidinecarboxylic acid monohydrate was performed in a Perkin-Elmer TGA7 thermobalance. A sample of 5.9 mg of the amino acid was placed in an aluminium pan and heated from 298 to 573 K at a rate of 10 K min−1, under a nitrogen flux of 50 ml min−1. For the DSC experiment, a sample of 4.0 mg contained in an aluminium vessel was placed inside a Perkin-Elmer DSC7 oven and heated at a rate of 10 K min−1 using the same temperature range and nitrogen flux as above.

The temperature controlled X-ray powder diffraction experiment was performed on the high-resolution powder X-ray diffractometer of beamline ID31 at ESRF (Fitch, 1996[Fitch, A. N. (1996). Mater. Sci. Forum, 228-231, 219-222.], 2004[Fitch, A. N. (2004). J. Res. Natl. Inst. Stand. Technol. 109, 133-142.]) with a wavelength of 0.33497 (6) Å. Sufficient quantities of 4-piperidinecarboxylic acid were loaded at room temperature into a 1.5 mm diameter borosilicate thin-walled glass capillary, spun at approximately 1 Hz, and heated by means of a hot air blower (Argoud & Capponi, 1984[Argoud, R. & Capponi, J. J. (1984). J. Appl. Cryst. 17, 420-425.]) mounted vertically, perpendicular to the capillary. The progression of the sample through the crystalline phase transitions, from room temperature to the melting point, was observed by recording patterns every 120 s in the 2θ range 0–16°, while warming at 2 K min−1. Diffraction patterns were also collected at 363 and 543 K for 2 h scan. Full experimental details are given in Table 1[link].1

Table 1
Experimental details

  363 K 543 K
Crystal data
Chemical formula C6H11NO2 C6H11NO2
Mr 129.16 129.16
Cell setting, space group Looparray, Pn21a Looparray, P212121
a, b, c (Å) 10.8548 (2), 9.7520 (1), 6.1152 (1) 11.7537 (5), 10.1013 (5), 5.5787 (2)
α, β, γ (°) 90, 90, 90 90, 90, 90
V3) 647.32 (2) 662.35 (5)
Z 4 4
Dx (Mg m−3) 1.325 1.295
Radiation type Synchrotron Synchrotron
μ (mm−1) 0.170 0.166
Temperature (K) 363 543
Specimen form, colour Cylinder (particle morphology: thin powder), white Cylinder (particle morphology: thin powder), white
Specimen size (mm) 40.0 × 1.5 × 1.5 40.0 × 1.5 × 1.5
Specimen preparation cooling rate (K min−1) 2 2
Specimen preparation pressure (kPa) None None
Specimen preparation temperature (K) 298 298
     
Data collection
Diffractometer Inet Inet
Data collection method Specimen mounting: borosilicate glass capillary; mode: transmission; scan method: continuous Specimen mounting: borosilicate glass capillary; mode: transmission; scan method: continuous
Absorption correction None None
2θ (°) 2θmin = 0.50966, 2θmax = 0.90466, increment = 0.005 2θmin = 0.50228, 2θmax = 0.89728, increment = 0.005
     
Refinement
Refinement on Inet Inet
R factors and goodness-of-fit Rp = 0.061, Rwp = 0.080, Rexp = 0.034, S = 2.37 Rp = 0.090, Rwp = 0.132, Rexp = 0.058, S = 2.29
Wavelength of incident radiation (Å) 0.33497 (6) 0.33497 (6)
Excluded region(s) None None
Profile function CW Profile function number 3 with 19 terms CW Profile function number 3 with 19 term
No. of parameters 94 94
H-atom treatment Constrained to parent site Constrained to parent site
Weighting scheme Looparray Looparray
(Δ/σ)max 0.04 0.030
Computer programs used: GSAS (Larson & Von Dreele, 2001[Larson, A. C. & Von Dreele, R. B. (2001). GSAS, General Structure Analysis System. Los Alamos National Laboratory, Los Alamos, New Mexico, USA.]), EXPGUI (Toby, 2001[Argoud, R. & Capponi, J. J. (1984). J. Appl. Cryst. 17, 420-425.]), DASH (David et al., 2001[David, W. I. F., Shankland, K., Cole, J., Maginn, S., Motherwell, W. D. H. & Taylor, R. (2001). DASH User Manual. Cambridge Crystallographic Data Centre, Cambridge, UK.]), DIAMOND (Brandenburg, 1998[Brandenburg, K. (1998). DIAMOND, Version 2.0h. Crystal Impact GbR, Bonn, Germany.]), PLATON (Spek, 2003[Spek, A. L. (2003). J. Appl. Cryst. 36, 7-13.]).

3. Results

Fig. 1[link](a) shows the TGA for 4-piperidinecarboxylic acid monohydrate. A maximum at 359 K, with a mass loss of 11.9%, corresponds to the dehydration process. A second broad maximum at 582 K, with a mass loss of 83.2%, is associated with the melting and decomposition of the amino acid. The DSC of Fig. 1[link](b) shows the dehydration as an endothermic process, with an enthalpy change of 37.9 kJ mol−1. After dehydration, the baseline of the thermogram rises owing to a change in the molar heat capacity (Cp) of the compound. At ca 543 K the baseline falls, indicating an exothermic process associated with melting and decomposition of the amino acid and in agreement with the TGA experiment.

[Figure 1]
Figure 1
(a) TGA (broken line: mass loss; continous line: mass loss velocity) and (b) DSC for 4-piperidinecarboxylic acid.

Fig. 2[link] shows the three-dimensional plot of the diffraction profiles versus temperature. Three crystalline phases were immediately identified. The first phase exists from room temperature to ca 353 K; the second phase exists up to 493 K, while the third phase appears at 458 K. The phase at room temperature corresponds to 4-piperidinecarboxylic acid monohydrate, C6H11NO2·H2O. This phase was reported previously (Delgado et al., 2001[Delgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965-967.]) in an orthorhombic Pna21 (No. 33) cell, with parameters a = 11.9647 (11), b = 8.3276 (7), c = 7.6054 (7) Å.

[Figure 2]
Figure 2
Three-dimensional temperature-dependent X-ray diffraction plot for 4-piperidinecarboxylic acid.

The diffraction pattern collected at 363 K was indexed in an orthorhombic cell, a = 10.862 (2), b = 9.755 (1), c = 6.119 (1) Å, from the positions of the first 20 peaks using DICVOL91 (Boultif & Louër, 1991[Boultif, A. & Louër, D. (1991). J. Appl. Cryst. 24, 987-993.]), with figures of merit M20 (De Wolff, 1968[De Wolff, P. M. (1968). J. Appl. Cryst. 1, 108-113.]) of 63.3 and F20 (Smith & Snyder, 1979[Smith, G. S. & Snyder, R. L. (1979). J. Appl. Cryst. 12, 60-65.]) of 511. Evaluation of the systematic absences in the diffraction pattern indicated the space group Pn21a (No. 33), with Z = 4 and one molecule in the asymmetric unit. The structure was solved using the simulated annealing program DASH (David et al., 2001[David, W. I. F., Shankland, K., Cole, J., Maginn, S., Motherwell, W. D. H. & Taylor, R. (2001). DASH User Manual. Cambridge Crystallographic Data Centre, Cambridge, UK.]). The amino acid fragment of the room-temperature phase (Delgado et al., 2001[Delgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965-967.]) was used as the starting model. This implied that seven parameters were to be found during minimization: three coordinates to describe the position of the centre of mass of the molecule and four quaternions describing its orientation. The simulated annealing program was set in default mode, with the number of runs fixed at ten. All the solutions arrived at the same minimum (χ2 = 44.1, approximately four times the Pawley χ2). The structure was allowed to refine using Rietveld's (Rietveld, 1969[Rietveld, H. M. (1969). J. Appl. Cryst. 2, 65-71.]) program GSAS (Larson & Von Dreele, 2001[Larson, A. C. & Von Dreele, R. B. (2001). GSAS, General Structure Analysis System. Los Alamos National Laboratory, Los Alamos, New Mexico, USA.]; Toby, 2001[Toby, B. H. (2001). J. Appl. Cryst. 34, 210-213.]), with 59 restraints distributed in the following manner: 20 bond-distance restraints, 38 angle restraints and 1 planar restraint applied to the carboxylate group. The initial values for bond distances and angles were taken from the room-temperature structure, weighted by 0.02 Å and 2°, respectively. H atoms were refined with C—H, N—H distances restrained to be 0.990 Å and weighted by 0.01 Å. The background was described by the automatic linear interpolation of 20 points throughout the whole pattern. The peak shapes were described by an anisotropic parameterized pseudo-Voigt peak shape function (van Laar & Yelon, 1984[Laar, B. van & Yelon, W. B. (1984). J. Appl. Cryst. 17, 47-54.]; Stephens, 1999[Stephens, P. W. (1999). J. Appl. Cryst. 32, 281-289.]), which includes an axial divergence asymmetry correction (Finger et al., 1994[Finger, L. W., Cox, D. E. & Jephcoat, A. P. (1994). J. Appl. Cryst. 27, 892-900.]). The temperature factors were refined as follows: one overall isotropic temperature factor for non-H atoms, except the carboxylate group, whose motion was described by a separate isotropic temperature factor. H atoms were refined as riding atoms with their temperature factors set to twice the value of the attached non-H atom. The refinement of 94 variables converged to Rwp = 0.080 and χ2 = 5.60. The observed, calculated and difference profiles of the final fit are shown in Fig. 3[link].

[Figure 3]
Figure 3
Rietveld refinement for anhydrous 4-piperidinecarboxylic acid at 363 K (phase 2).

The diffraction pattern collected at 543 K was also indexed from the positions of the first 20 peaks using DICVOL91 (Boultif & Louër, 1991[Boultif, A. & Louër, D. (1991). J. Appl. Cryst. 24, 987-993.]), a = 11.752 (1), b = 10.105 (3), c = 5.5775 (8) Å, with figures of merit M20 = 39.9 (De Wolff, 1968[De Wolff, P. M. (1968). J. Appl. Cryst. 1, 108-113.]) and F20 = 256 (Smith & Snyder, 1979[Smith, G. S. & Snyder, R. L. (1979). J. Appl. Cryst. 12, 60-65.]). Evaluation of systematic absences indicated the space group P212121 (No. 19). The structure was solved using the program DASH (David et al., 2001[David, W. I. F., Shankland, K., Cole, J., Maginn, S., Motherwell, W. D. H. & Taylor, R. (2001). DASH User Manual. Cambridge Crystallographic Data Centre, Cambridge, UK.]), following the same procedure as described above. On this occasion, the solutions arrived at a minimum with χ2 = 21.7, approximately five times the Pawley χ2. In order to compare this structure to the same standard with 4-piperidinecarboxylic acid monohydrate (phase 1) and anhydrous 4-piperidinecarboxylic acid (phase 2), the Rietveld refinement (Rietveld, 1969[Rietveld, H. M. (1969). J. Appl. Cryst. 2, 65-71.]) with the program GSAS was carried out following strictly the same procedure as described above. The final agreement factors were Rwp = 0.132 and χ2 = 5.23. It is likely that two major factors are responsible for the slightly high Rwp reported for the refinement of phase 3:

  • (a) changes in sample mass during the diffraction data collection due to decomposition and

  • (b) poor modelling of thermal motion at such high temperature.

The observed, calculated and difference profiles of the final fit are shown in Fig. 4[link]. Table 2[link] contains selected torsion angles for the three phases.

Table 2
Bond distances (Å) and angles (°)

  Phase 2 Phase 3
O1—C1 1.252 (9) 1.19 (2)
O2—C1 1.312 (9) 1.21 (2)
N1—C4 1.51 (2) 1.49 (3)
N1—C5 1.41 (1) 1.48 (3)
C1—C2 1.56 (1) 1.55 (2)
C2—C3 1.51 (2) 1.52 (3)
C2—C6 1.50 (2) 1.55 (4)
C3—C4 1.57 (2) 1.59 (4)
C5—C6 1.56 (2) 1.55 (4)
     
C4—N1—C5 117.6 (8) 121 (2)
O1—C1—O2 122.8 (7) 120 (2)
O1—C1—C2 121.8 (7) 119 (2)
O2—C1—C2 115.4 (6) 121 (2)
C1—C2—C3 107.5 (9) 113 (2)
C1—C2—C6 111.5 (9) 106 (2)
C3—C2—C6 111.2 (8) 121 (2)
C2—C3—C4 107.5 (9) 106 (2)
N1—C4—C3 108.3 (9) 113 (2)
N1—C5—C6 105 (1) 111 (2)
C2—C6—C5 112.3 (9) 109 (2)
Torsion angles (°) Phase 1 Phase 2 Phase 3
O1—C1—C2—C3 178.5 (2) 134 (1) −137 (2)
O1—C1—C2—C6 −57.5 (3) −104 (1) 89 (2)
O2—C1—C2—C3 −2.1 (3) −49 (1) 50 (3)
O2—C1—C2—C6 121.9 (3) 73 (1) −85 (3)
[Figure 4]
Figure 4
Rietveld refinement for anhydrous 4-piperidinecarboxylic acid at 543 K (phase3).

4. Discussion

Comparison of the temperature-dependent experiments TGA, DSC and X-ray diffraction confirms the existence of three crystalline phases for 4-piperidenecarboxylic acid. Phase 1 corresponds to 4-piperidinecarboxylic acid monohydrate, which prevails from room temperature to 353 K. At this temperature an endothermic transition (ΔH = +37.9 kJ mol−1) occurs, whose mass loss exactly matches the removal from the crystalline phase 1 of four molecules of water per unit cell with the corresponding cell-volume contraction of 111 Å3. Hence, phase 2 represents an anhydrous form of 4-piperidinecarboxylic acid. Another phase transition, observed only in the temperature-controlled X-ray experiment, initiates at around 458 K. This second phase transition does not involve mass loss and arises from an additional reordering of the molecules with a 15.0 Å3 expansion of the cell. Therefore, phase 3 represents another anhydrous high-temperature form of 4-piperidenecarboxylic acid. Fig. 5[link] shows the atom labelling scheme for the two anhydrous forms of 4-piperidinecarboxyilic acid. Fig. 6[link] shows an assessment of the molecular conformation of the three crystalline phases. As expected, phase 2 adopts the chair conformation, similar to that observed at room temperature for 4-piperidinecarboxylic acid monohydrate, phase 1 (Delgado et al., 2001[Delgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965-967.]), and in the related crystal structures 2-piperidinecarboxylic acid (Bhattacharjee & Chacko, 1979[Bhattacharjee, S. K. & Chacko, K. K. (1979). Acta Cryst. B35, 396-398.]) and 3-piperidinecarboxylic acid (Brehm et al., 1976[Brehm, L., Krogsgaard-Larsen, P., Johnston, G. A. R. & Schaumberg, K. (1976). Acta Chem. Scand. B, 30, 542-548.]). The carboxy­late group is equatorial to the ring, with N1 and C2 placed on opposite sides of the mean plane of the piperidine ring, 0.229 and 0.265 Å, respectively. The orientation of the carboxylate group is described by the torsion angles contained in Table 2[link]. In essence, the most prominent variation at a molecular level detected in this phase corresponds to the orientation of the carboxylate group with respect to the piperidine ring. At room temperature this group adopts an almost coplanar orientation with respect to the piperidine mean plane, as described by the torsion angle O2—C1—C2—C6 122°. Once the water molecules split away, breaking carboxylate–water hydrogen bonds, the carboxylate group rotates 49° clockwise about the C1—C2 bond, as denoted by the value of the torsion angle O2—C1—C2—C6 73°. In phase 3 few deviations from the molecular conformation of phase 2 are perceived. The orientation of the carboxylate group is kept as shown by the corresponding torsion angles of Table 2[link], and by the positions of N1 and C2, also positioned on different sides of the mean plane of the piperidine ring at 0.195 and 0.231 Å, respectively.

[Figure 5]
Figure 5
Labelling scheme for anhydrous 4-piperidinecarboxylic acid (phases 2 and 3).
[Figure 6]
Figure 6
Orientation of the carboxylate group with respect to the piperidine ring in 4-piperidinecarboxylic acid (a) monohydrate (293 K), (b) anhydrous (363 K) and (c) anhydrous (543 K).

Hydrogen bonds for the three phases of 4-piperidinecarboxylic acid are summarized in Table 3[link]. The projection of the crystal packing of 4-piperidinecarboxylic acid monohydrate at room temperature is presented elsewhere (Delgado et al., 2001[Delgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965-967.]). Two supramolecular types of structures are recognized. Extended chains of amino acid molecules linked by NH2+⋯COO hydrogen bonds run along b and c. Additionally, extended bent chains of amino acid molecules, intercalated with water molecules linked by H2O⋯COO hydrogen bonds, run parallel to a. A combination of all the interactions forms a three-dimensional assembly of hydrogen bonds, in which the amino group acts as a donor to both its H atoms, while the carboxylate acts as an acceptor of four H atoms, two from amino groups of neighbouring amino acid molecules and two from water molecules. In Fig. 7[link] projection down c of phase 1 shows a 25-atom cycle constructed from hydrogen bonds among five amino acids and two water molecules. When water leaves, breaking the H2O⋯COO hydrogen bonds, a reordering of the structure occurs to fill the empty space left by the water molecules.

Table 3
Geometries of hydrogen bonds (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
Phase 1: 4-piperidinecarboxylic acid monohydrate
N1—H10⋯O1i 0.89 (4) 1.86 (4) 2.744 (3) 175 (4)
N1—H11⋯O2ii 0.94 (4) 1.85 (4) 2.776 (3) 169 (3)
O3—H12⋯O2iii 0.87 (8) 1.97 (7) 2.752 (4) 149 (8)
O3—H13⋯O1ii 0.85 (7) 2.06 (6) 2.862 (4) 157 (7)
         
Phase 2: 4-piperidinecarboxylic acid dihydrate
N1—H10⋯O1iv 0.97 (3) 1.77 (2) 2.720 (8) 164 (3)
N1—H11⋯O2v 0.97 (2) 1.95 (3) 2.725 (8) 135 (3)
C2—H1⋯O2vi 1.07 (3) 2.36 (2) 3.426 (9) 170 (2)
C5—H6⋯O2vii 0.98 (3) 2.60 (3) 3. 49 (1) 15 1(2)
         
Phase 3: Anhydrous 4-piperidinecarboxylic acid (high temperature).
N1—H10⋯O1viii 0.98 (4) 2.38 (4) 3.30 (2) 155 (4)
N1—H10⋯O2ix 0.98 (4) 2.14 (5) 3.00 (2) 145 (4)
N1—H11⋯O1ix 0.98 (5) 1.88 (5) 2.82 (2) 158 (5)
C2—H1⋯O2x 1.09 (4) 2.39 (3) 3.42 (2) 157 (4)
Symmetry codes: (i) [{1\over 2}-x, {1\over 2}+y, -{1\over 2}+z]; (ii) x, y, -1+z; (iii) [{1\over 2}+x, {1\over 2}-y, -1+z]; (iv) x, y, 1+z; (v) [-{1\over 2}+x, y, {1\over 2}-z]; (vi) [-{1\over 2}+x, y, -{1\over 2}-z]; (vii) [{1\over 2}-x, {1\over 2}+y, {1\over 2}+z]; (viii) [-{1\over 2}+x, {1\over 2}-y,1-z]; (ix) [-{1\over 2}+x, {1\over 2}-y,-z]; (x) x, y, -1+z.
†Taken from Delgado et al. (2001[Delgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965-967.]).
[Figure 7]
Figure 7
Projection down c of 4-piperidinecarboxylic acid monohydrate at 293 K (phase 1) showing the 25-atom cycle constructed from hydrogen bonds among five amino acids and two water molecules.

In fact, packing is improved in phase 2 and the filled space amounts to 72.1%, in contrast with 69.2% for phase 1. Fig. 8[link] is a projection down b showing a 20-atom cycle formed by hydrogen bonds among four amino acid molecules. Evaluation of the hydrogen bonds contained in Table 3[link] indicates that the H-atom donor capacity of the amino group is 2, donating its two H atoms to O atoms of carboxylate groups of amino acids located in the vicinity. On the other hand, the packing of molecules is such as to guarantee the interaction of O2 with neighbouring amino acids by means of two O⋯H—C weak hydrogen bonds. In this way, the carboxylate group completes its acceptor capacity. Fig. 9[link] shows the layered nature of the structure, where a stack of these layers related by 21 axes down b is displayed. The weak hydrogen bonds C5—H6⋯O2 of 2.39 Å between molecules related by [\textstyle{1\over 2}-x, {1\over 2}+y, {1\over 2}+z] translations act as anchors and maintain the layered packing of the structure. The counterparts of these hydrophilic interactions are hydrophobic interactions of the type C—H⋯H—C, the shortest of these interactions being the one corresponding to H2⋯H9 2.53 Å between amino acid molecules related by the translation operation [\textstyle{1\over 2}-x, {1\over 2}+y, {1\over 2}+z].

[Figure 8]
Figure 8
Projection down b of anhydrous 4-piperidinecarboxylic acid at 363 K (phase 2), displaying the 20-atom cycle of four hydrogen-bonded amino acids.
[Figure 9]
Figure 9
Projection down c of anhydrous 4-piperidinecarboxylic acid at 363 K (phase 2).

Upon heating, the amino acid molecules require additional space to accommodate thermal motion and hence, elongation of the hydrogen bonds occurs. Furthermore, small oscillations of the amino acid molecules from the equilibrium positions attained in the crystalline structure of phase 2 produce a redistribution of the hydrogen bonds, in which, in a concerted way, some hydrogen bonds break and others appear. The modification of the hydrogen bonds gives rise to the high-temperature phase 3. A packing view of phase 3 down b is shown in Fig. 10[link]. The geometries of the hydrogen bonds are depicted in Table 3[link]. It is interesting to point out that even at 543 K, a temperature close to the melting point of the amino acid, the donor and acceptor capacities of the amino and carboxylate groups are kept. For instance, packing must favour the geometries of the bifurcated donor N1—H10 ⋯O2 and C2—H1⋯O2 hydrogen bonds to complete the acceptor capacity of O2.

[Figure 10]
Figure 10
Projection down b of anhydrous 4-piperidinecarboxylic acid at 543 K (phase 3).

5. Concluding remarks

A temperature-controlled X-ray powder diffraction experiment, complemented with TGA and DSC analysis, allowed us to follow changes in the molecular conformation and hydrogen-bond patterns of 4-piperidinecarboxylic acid. It is perceived that progression through the phase changes is accompanied by the concerted rupture and formation of hydrogen bonds, with the subsequent modification of the torsional orientation of the terminal carboxylate group. However, regardless of temperature, stabilization of a phase requires that the amino group donate both its H atoms for hydrogen bonding, while the carboxylate group must participate as an acceptor in the formation of at least four hydrogen bonds. This pseudo-coordination rule is evidence of the highly covalent and directional character of the hydrogen bonds in amino acids.

Supporting information


Computing details top

For both compounds, data collection: EXPGUI (Toby, 2001). Cell refinement: GSAS (Larson and von Dreele, 2001) for 363K; GSAS (Larson and Von Dreele, 2001) for 543K. Program(s) used to solve structure: DASH 2.0 (David et al., 2001) for 363K; Dash (David et al., 2001) for 543K. Program(s) used to refine structure: GSAS (Larson and von Dreele, 2001) for 363K; GSAS (Larson and Von Dreele, 2001) for 543K. Molecular graphics: Diamond 2.1 (Brandenburg, 1998) for 363K. Software used to prepare material for publication: GSAS (Larson and von Dreele, 2001) for 363K; PLATON (Spek, 2003) for 543K.

Figures top
[Figure 1]
[Figure 2]
[Figure 3]
[Figure 4]
[Figure 5]
[Figure 6]
[Figure 7]
[Figure 8]
[Figure 9]
[Figure 10]
(363K) piperidine-4-carboxylic acid top
Crystal data top
C6H11NO2F(000) = 280
Mr = 129.16Dx = 1.325 Mg m3
Orthorhombic, Pn21aSynchrotron radiation, λ = 0.334971 Å
Hall symbol: P -2ac -2nµ = 0.17 mm1
a = 10.8548 (2) ÅT = 363 K
b = 9.7520 (1) ÅParticle morphology: thin powder
c = 6.1152 (1) Åwhite
V = 647.32 (2) Å3cylinder, 40.0 × 1.5 mm
Z = 4Specimen preparation: Prepared at 298 K and none kPa, cooled at 2 K min1
Data collection top
Inet
diffractometer
Data collection mode: transmission
Radiation source: synchrotron, ESRF-Beamline ID31Scan method: continuous
Double crystal Si <111> monochromator2θmin = 0.510°, 2θmax = 0.905°, 2θstep = 0.005°
Specimen mounting: borosilicate glass capillary
Refinement top
Least-squares matrix: FullProfile function: CW Profile function number 3 with 19 terms Pseudovoigt profile coefficients as parameterized in P. Thompson, D.E. Cox & J.B. Hastings (1987). J. Appl. Cryst.,20,79-83. Asymmetry correction of L.W. Finger, D.E. Cox & A. P. Jephcoat (1994). J. Appl. Cryst.,27,892-900. #1(GU) = 0.000 #2(GV) = 0.000 #3(GW) = 0.000 #4(GP) = 0.000 #5(LX) = 0.126 #6(LY) = 17.370 #7(S/L) = 0.0005 #8(H/L) = 0.0006 #9(trns) = 0.00 #10(shft)= 0.0000 #11(stec)= 0.00 #12(ptec)= 0.00 #13(sfec)= 0.00 #14(L11) = -0.021 #15(L22) = -0.017 #16(L33) = 0.000 #17(L12) = 0.084 #18(L13) = -0.090 #19(L23) = 0.106 Peak tails are ignored where the intensity is below 0.0100 times the peak Aniso. broadening axis 0.0 0.0 1.0
Rp = 0.06194 parameters
Rwp = 0.08059 restraints
Rexp = 0.0343 constraints
R(F2) = 0.12217H-atom parameters constrained
χ2 = 5.617(Δ/σ)max = 0.04
80 data pointsBackground function: GSAS Background function number 7 with 20 terms. Linear interpolation 1: 523.598 2: 656.484 3: 710.567 4: 972.386 5: 589.805 6: 543.518 7: 527.040 8: 507.186 9: 520.478 10: 546.807 11: 566.008 12: 573.916 13: 508.387 14: 500.746 15: 493.528 16: 501.113 17: 512.127 18: 531.972 19: 533.443 20: 527.495
Excluded region(s): none
Crystal data top
C6H11NO2V = 647.32 (2) Å3
Mr = 129.16Z = 4
Orthorhombic, Pn21aSynchrotron radiation, λ = 0.334971 Å
a = 10.8548 (2) ŵ = 0.17 mm1
b = 9.7520 (1) ÅT = 363 K
c = 6.1152 (1) Åcylinder, 40.0 × 1.5 mm
Data collection top
Inet
diffractometer
Scan method: continuous
Specimen mounting: borosilicate glass capillary2θmin = 0.510°, 2θmax = 0.905°, 2θstep = 0.005°
Data collection mode: transmission
Refinement top
Rp = 0.06180 data points
Rwp = 0.08094 parameters
Rexp = 0.03459 restraints
R(F2) = 0.12217H-atom parameters constrained
χ2 = 5.617
Special details top

Geometry. Bond distances, angles etc. have been calculated using the rounded fractional coordinates. All su's are estimated from the variances of the (full) variance-covariance matrix. The cell e.s.d.'s are taken into account in the estimation of distances, angles and torsion angles

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C10.3028 (7)0.4979 (9)0.2470 (12)0.0414 (15)*
C20.1886 (7)0.4993 (13)0.0920 (12)0.0398 (11)*
H10.107 (2)0.486 (4)0.189 (5)0.080 (9)*
C30.1947 (14)0.3717 (11)0.047 (2)0.0398 (11)*
H20.269 (2)0.370 (4)0.144 (6)0.080 (9)*
H30.188 (4)0.287 (3)0.043 (5)0.080 (9)*
C40.0791 (13)0.3723 (11)0.2015 (19)0.0398 (11)*
H40.004 (2)0.371 (4)0.107 (6)0.080 (9)*
H50.084 (4)0.292 (3)0.298 (5)0.080 (9)*
C50.0741 (15)0.6279 (11)0.206 (2)0.0398 (11)*
H60.077 (4)0.710 (3)0.299 (5)0.080 (9)*
H70.005 (2)0.616 (4)0.125 (6)0.080 (9)*
C60.1861 (14)0.6258 (10)0.0467 (19)0.0398 (11)*
H80.263 (3)0.637 (4)0.137 (6)0.080 (9)*
H90.177 (4)0.707 (3)0.049 (5)0.080 (9)*
N10.0785 (6)0.5051 (12)0.3270 (10)0.0398 (11)*
H100.146 (3)0.511 (4)0.431 (5)0.080 (9)*
H110.0058 (16)0.515 (4)0.379 (6)0.080 (9)*
O10.2935 (5)0.5247 (10)0.4466 (8)0.0414 (15)*
O20.4089 (5)0.4740 (9)0.1517 (9)0.0414 (15)*
Geometric parameters (Å, º) top
O1—C11.252 (9)C5—C61.56 (2)
O2—C11.312 (9)C2—H11.07 (3)
N1—C41.505 (15)C3—H21.00 (3)
N1—C51.409 (15)C3—H31.00 (3)
N1—H110.97 (2)C4—H41.00 (3)
N1—H100.97 (3)C4—H50.98 (3)
C1—C21.561 (11)C5—H60.98 (3)
C2—C31.508 (16)C5—H71.00 (3)
C2—C61.497 (15)C6—H81.01 (4)
C3—C41.571 (19)C6—H90.99 (3)
C4—N1—C5117.6 (8)C2—C3—H3112 (2)
H10—N1—H11119 (3)C4—C3—H2107 (2)
C4—N1—H11105 (2)C4—C3—H3106 (3)
C5—N1—H10109 (2)H2—C3—H3112 (3)
C4—N1—H10112 (2)N1—C4—H4108 (2)
C5—N1—H1193 (2)N1—C4—H5112 (2)
O1—C1—C2121.8 (7)C3—C4—H4108 (2)
O2—C1—C2115.4 (6)C3—C4—H5108 (3)
O1—C1—O2122.8 (7)H4—C4—H5112 (3)
C1—C2—C6111.5 (9)N1—C5—H6113 (2)
C3—C2—C6111.2 (8)N1—C5—H7101 (2)
C1—C2—C3107.5 (9)C6—C5—H6110 (3)
C2—C3—C4107.5 (9)C6—C5—H7111 (2)
N1—C4—C3108.3 (9)H6—C5—H7114 (4)
N1—C5—C6106.9 (10)C2—C6—H8113 (2)
C2—C6—C5112.3 (9)C2—C6—H9109 (2)
C1—C2—H1108.6 (16)C5—C6—H8108 (2)
C3—C2—H1104 (2)C5—C6—H9106 (3)
C6—C2—H1113 (2)H8—C6—H9109 (3)
C2—C3—H2113 (2)
C4—N1—C5—C656.5 (13)C6—C2—C3—C458.3 (12)
C5—N1—C4—C359.2 (13)C3—C2—C6—C559.0 (13)
O1—C1—C2—C3134.3 (10)C1—C2—C6—C5178.9 (9)
O1—C1—C2—C6103.6 (10)C1—C2—C3—C4179.5 (8)
O2—C1—C2—C349.1 (11)C2—C3—C4—N155.2 (12)
O2—C1—C2—C673.0 (11)N1—C5—C6—C254.5 (13)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H10···O1i0.97 (3)1.77 (2)2.720 (8)164 (3)
N1—H11···O2ii0.97 (2)1.95 (3)2.725 (8)135 (3)
C2—H1···O2iii1.07 (3)2.36 (2)3.426 (9)170 (2)
C5—H6···O2iv0.98 (3)2.60 (3)3.49 (1)151 (2)
Symmetry codes: (i) x, y, z+1; (ii) x1/2, y, z+1/2; (iii) x1/2, y, z1/2; (iv) x, y+1/2, z.
(543K) piperidine-4-carboxylic acid top
Crystal data top
C6H11NO2F(000) = 280
Mr = 129.16Dx = 1.295 Mg m3
Orthorhombic, P212121Synchrotron radiation, λ = 0.334971 Å
Hall symbol: P 2ac 2abµ = 0.17 mm1
a = 11.7537 (5) ÅT = 543 K
b = 10.1013 (5) ÅParticle morphology: thin powder
c = 5.5787 (2) Åwhite
V = 662.35 (5) Å3cylinder, 40.0 × 1.5 mm
Z = 4Specimen preparation: Prepared at 298 K and none kPa, cooled at 2 K min1
Data collection top
Inet
diffractometer
Data collection mode: transmission
Radiation source: synchrotron, Beamline ID31Scan method: continuous
Double crystal Si <111> monochromator2θmin = 0.502°, 2θmax = 0.897°, 2θstep = 0.005°
Specimen mounting: borosilicate glass capillary
Refinement top
Refinement on InetExcluded region(s): none
Least-squares matrix: FullProfile function: CW Profile function number 3 with 19 terms Pseudovoigt profile coefficients as parameterized in P. Thompson, D.E. Cox & J.B. Hastings (1987). J. Appl. Cryst.,20,79-83. Asymmetry correction of L.W. Finger, D.E. Cox & A. P. Jephcoat (1994). J. Appl. Cryst.,27,892-900. #1(GU) = 0.000 #2(GV) = 0.000 #3(GW) = 0.000 #4(GP) = 0.000 #5(LX) = 0.000 #6(LY) = 27.528 #7(S/L) = 0.0030 #8(H/L) = 0.0060 #9(trns) = 0.00 #10(shft)= 0.0000 #11(stec)= 0.00 #12(ptec)= 0.00 #13(sfec)= 0.00 #14(L11) = 0.000 #15(L22) = -0.193 #16(L33) = -0.002 #17(L12) = 0.088 #18(L13) = -0.376 #19(L23) = 0.135 Peak tails are ignored where the intensity is below 0.0100 times the peak Aniso. broadening axis 0.0 0.0 1.0
Rp = 0.09094 parameters
Rwp = 0.13259 restraints
Rexp = 0.0583 constraints
R(F2) = 0.28936H-atom parameters constrained
χ2 = 5.244(Δ/σ)max = 0.030
80 data pointsBackground function: GSAS Background function number 7 with 20 terms. Linear interpolation 1: 347.588 2: 375.198 3: 492.679 4: 460.637 5: 285.038 6: 253.844 7: 262.732 8: 218.501 9: 205.321 10: 211.366 11: 212.225 12: 210.335 13: 191.906 14: 180.070 15: 168.545 16: 168.518 17: 182.913 18: 189.448 19: 193.998 20: 183.391
Crystal data top
C6H11NO2V = 662.35 (5) Å3
Mr = 129.16Z = 4
Orthorhombic, P212121Synchrotron radiation, λ = 0.334971 Å
a = 11.7537 (5) ŵ = 0.17 mm1
b = 10.1013 (5) ÅT = 543 K
c = 5.5787 (2) Åcylinder, 40.0 × 1.5 mm
Data collection top
Inet
diffractometer
Scan method: continuous
Specimen mounting: borosilicate glass capillary2θmin = 0.502°, 2θmax = 0.897°, 2θstep = 0.005°
Data collection mode: transmission
Refinement top
Rp = 0.09080 data points
Rwp = 0.13294 parameters
Rexp = 0.05859 restraints
R(F2) = 0.28936H-atom parameters constrained
χ2 = 5.244
Special details top

Geometry. Bond distances, angles etc. have been calculated using the rounded fractional coordinates. All su's are estimated from the variances of the (full) variance-covariance matrix. The cell e.s.d.'s are taken into account in the estimation of distances, angles and torsion angles

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
O10.4272 (13)0.2159 (18)0.402 (3)0.086 (6)*
O20.3101 (13)0.274 (2)0.661 (3)0.086 (6)*
N10.0249 (12)0.237 (3)0.051 (3)0.061 (4)*
C10.3340 (14)0.2529 (19)0.453 (3)0.086 (6)*
C20.2416 (15)0.258 (3)0.256 (3)0.061 (4)*
C30.185 (2)0.120 (2)0.255 (6)0.061 (4)*
C40.095 (2)0.115 (2)0.052 (5)0.061 (4)*
C50.079 (2)0.370 (2)0.058 (5)0.061 (4)*
C60.170 (2)0.383 (2)0.267 (5)0.061 (4)*
H10.287 (4)0.266 (6)0.087 (5)0.29 (5)*
H20.150 (5)0.100 (6)0.412 (7)0.29 (5)*
H30.243 (4)0.050 (4)0.224 (14)0.29 (5)*
H40.045 (4)0.037 (4)0.075 (13)0.29 (5)*
H50.134 (5)0.104 (6)0.103 (6)0.29 (5)*
H60.118 (6)0.387 (6)0.097 (6)0.29 (5)*
H70.019 (4)0.438 (5)0.080 (14)0.29 (5)*
H80.132 (5)0.393 (6)0.424 (6)0.29 (5)*
H90.218 (4)0.462 (4)0.238 (13)0.29 (5)*
H100.021 (4)0.231 (5)0.197 (7)0.29 (5)*
H110.018 (5)0.232 (5)0.099 (7)0.29 (5)*
Geometric parameters (Å, º) top
O1—C11.19 (2)C5—C61.59 (4)
O2—C11.21 (2)C2—H11.09 (4)
N1—C41.48 (3)C3—H20.99 (5)
N1—C51.49 (3)C3—H31.00 (5)
N1—H110.98 (5)C4—H40.99 (5)
N1—H100.98 (4)C4—H50.99 (5)
C1—C21.55 (2)C5—H60.99 (5)
C2—C31.55 (4)C5—H70.99 (5)
C2—C61.52 (3)C6—H80.99 (5)
C3—C41.55 (4)C6—H90.99 (5)
C4—N1—C5120.9 (16)C2—C3—H3110 (3)
H10—N1—H11115 (4)C4—C3—H2111 (4)
C4—N1—H11104 (4)C4—C3—H3109 (5)
C5—N1—H10106 (4)H2—C3—H3107 (6)
C4—N1—H10105 (4)N1—C4—H4109 (3)
C5—N1—H11107 (4)N1—C4—H5110 (4)
O1—C1—C2119.1 (16)C3—C4—H4110 (4)
O2—C1—C2120.8 (16)C3—C4—H5109 (4)
O1—C1—O2119.8 (18)H4—C4—H5108 (6)
C1—C2—C6113 (2)N1—C5—H6109 (4)
C3—C2—C6120.8 (17)N1—C5—H7109 (3)
C1—C2—C3106 (2)C6—C5—H6108 (4)
C2—C3—C4109.0 (19)C6—C5—H7109 (5)
N1—C4—C3110.8 (18)H6—C5—H7108 (6)
N1—C5—C6112.5 (18)C2—C6—H8112 (4)
C2—C6—C5106.0 (18)C2—C6—H9110 (3)
C1—C2—H1106 (3)C5—C6—H8111 (4)
C3—C2—H1106 (4)C5—C6—H9109 (4)
C6—C2—H1104 (4)H8—C6—H9109 (6)
C2—C3—H2111 (4)
C4—N1—C5—C651 (3)C6—C2—C3—C453 (3)
C5—N1—C4—C349 (3)C3—C2—C6—C552 (3)
O1—C1—C2—C389 (2)C1—C2—C6—C5178.8 (17)
O1—C1—C2—C6137 (2)C1—C2—C3—C4177.1 (18)
O2—C1—C2—C385 (3)C2—C3—C4—N145 (3)
O2—C1—C2—C650 (3)N1—C5—C6—C246 (2)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H10···O1i0.98 (4)2.38 (4)3.30 (2)155 (4)
N1—H10···O2i0.98 (4)2.14 (5)3.00 (2)145 (4)
N1—H11···O1ii0.98 (5)1.88 (5)2.82 (2)158 (5)
C2—H1···O2iii1.09 (4)2.39 (3)3.42 (2)157 (4)
Symmetry codes: (i) x1/2, y+1/2, z+1; (ii) x1/2, y+1/2, z; (iii) x, y, z1.

Experimental details

(363K)(543K)
Crystal data
Chemical formulaC6H11NO2C6H11NO2
Mr129.16129.16
Crystal system, space groupOrthorhombic, Pn21aOrthorhombic, P212121
Temperature (K)363543
a, b, c (Å)10.8548 (2), 9.7520 (1), 6.1152 (1)11.7537 (5), 10.1013 (5), 5.5787 (2)
V3)647.32 (2)662.35 (5)
Z44
Radiation typeSynchrotron, λ = 0.334971 ÅSynchrotron, λ = 0.334971 Å
µ (mm1)0.170.17
Specimen shape, size (mm)Cylinder, 40.0 × 1.5Cylinder, 40.0 × 1.5
Data collection
DiffractometerInet
diffractometer
Inet
diffractometer
Specimen mountingBorosilicate glass capillaryBorosilicate glass capillary
Data collection modeTransmissionTransmission
Scan methodContinuousContinuous
2θ values (°)2θmin = 0.510 2θmax = 0.905 2θstep = 0.0052θmin = 0.502 2θmax = 0.897 2θstep = 0.005
Refinement
R factors and goodness of fitRp = 0.061, Rwp = 0.080, Rexp = 0.034, R(F2) = 0.12217, χ2 = 5.617Rp = 0.090, Rwp = 0.132, Rexp = 0.058, R(F2) = 0.28936, χ2 = 5.244
No. of data points8080
No. of parameters9494
No. of restraints5959
H-atom treatmentH-atom parameters constrainedH-atom parameters constrained

Computer programs: EXPGUI (Toby, 2001), GSAS (Larson and von Dreele, 2001), GSAS (Larson and Von Dreele, 2001), DASH 2.0 (David et al., 2001), Dash (David et al., 2001), Diamond 2.1 (Brandenburg, 1998), PLATON (Spek, 2003).

Selected geometric parameters (Å, º) for (363K) top
O1—C11.252 (9)N1—C41.505 (15)
O2—C11.312 (9)N1—C51.409 (15)
C4—N1—C5117.6 (8)O1—C1—O2122.8 (7)
O1—C1—C2121.8 (7)N1—C4—C3108.3 (9)
O2—C1—C2115.4 (6)N1—C5—C6106.9 (10)
Hydrogen-bond geometry (Å, º) for (363K) top
D—H···AD—HH···AD···AD—H···A
N1—H10···O1i0.97 (3)1.77 (2)2.720 (8)164 (3)
N1—H11···O2ii0.97 (2)1.95 (3)2.725 (8)135 (3)
C2—H1···O2iii1.07 (3)2.36 (2)3.426 (9)170 (2)
C5—H6···O2iv0.98 (3)2.60 (3)3.49 (1)151 (2)
Symmetry codes: (i) x, y, z+1; (ii) x1/2, y, z+1/2; (iii) x1/2, y, z1/2; (iv) x, y+1/2, z.
Selected geometric parameters (Å, º) for (543K) top
O1—C11.19 (2)C2—C31.55 (4)
O2—C11.21 (2)C2—C61.52 (3)
N1—C41.48 (3)C3—C41.55 (4)
N1—C51.49 (3)C5—C61.59 (4)
C1—C21.55 (2)
C4—N1—C5120.9 (16)C3—C2—C6120.8 (17)
O1—C1—C2119.1 (16)C1—C2—C3106 (2)
O2—C1—C2120.8 (16)C2—C3—C4109.0 (19)
O1—C1—O2119.8 (18)N1—C4—C3110.8 (18)
C1—C2—C6113 (2)N1—C5—C6112.5 (18)
O1—C1—C2—C389 (2)O2—C1—C2—C385 (3)
O1—C1—C2—C6137 (2)O2—C1—C2—C650 (3)
Hydrogen-bond geometry (Å, º) for (543K) top
D—H···AD—HH···AD···AD—H···A
N1—H10···O1i0.98 (4)2.38 (4)3.30 (2)155 (4)
N1—H10···O2i0.98 (4)2.14 (5)3.00 (2)145 (4)
N1—H11···O1ii0.98 (5)1.88 (5)2.82 (2)158 (5)
C2—H1···O2iii1.09 (4)2.39 (3)3.42 (2)157 (4)
Symmetry codes: (i) x1/2, y+1/2, z+1; (ii) x1/2, y+1/2, z; (iii) x, y, z1.
 

Footnotes

1Supplementary data for this paper are available from the IUCr electronic archives (Reference: AV5021 ). Services for accessing these data are described at the back of the journal.

Acknowledgements

We thank the ESRF for providing synchrotron radiation beamtime, FONACIT-Venezuela and CDCHT-ULA (Grant C-990–99-08-AA), and M. Sc. Carlos Torres for the TGA and DSC experiments.

References

First citationArgoud, R. & Capponi, J. J. (1984). J. Appl. Cryst. 17, 420–425.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationBhattacharjee, S. K. & Chacko, K. K. (1979). Acta Cryst. B35, 396–398.  CSD CrossRef CAS IUCr Journals Web of Science Google Scholar
First citationBoultif, A. & Louër, D. (1991). J. Appl. Cryst. 24, 987–993.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationBrandenburg, K. (1998). DIAMOND, Version 2.0h. Crystal Impact GbR, Bonn, Germany.  Google Scholar
First citationBrehm, L., Krogsgaard-Larsen, P., Johnston, G. A. R. & Schaumberg, K. (1976). Acta Chem. Scand. B, 30, 542–548.  CrossRef Web of Science Google Scholar
First citationCuervo, J., Rincón, L., Almeida, R., Mora, A. J., Delgado, G. & Bahsas, A. (2002). J. Mol. Struct. 615, 191–199.  Web of Science CrossRef CAS Google Scholar
First citationDavid, W. I. F., Shankland, K., Cole, J., Maginn, S., Motherwell, W. D. H. & Taylor, R. (2001). DASH User Manual. Cambridge Crystallographic Data Centre, Cambridge, UK.  Google Scholar
First citationDe Wolff, P. M. (1968). J. Appl. Cryst. 1, 108–113.  CrossRef IUCr Journals Web of Science Google Scholar
First citationDelgado, G., Mora, A. J. & Bahsas, A. (2001). Acta Cryst. C57, 965–967.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationFinger, L. W., Cox, D. E. & Jephcoat, A. P. (1994). J. Appl. Cryst. 27, 892–900.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationFitch, A. N. (1996). Mater. Sci. Forum, 228–231, 219–222.  CrossRef CAS Google Scholar
First citationFitch, A. N. (2004). J. Res. Natl. Inst. Stand. Technol. 109, 133–142.  Web of Science CrossRef CAS Google Scholar
First citationGlusker, J. P. (1996). The Crystal as a Supramolecular Entity, Vol. 2, edited by G. R. Desiraju, ch. 6. London: John Wiley and Sons.  Google Scholar
First citationJensen, J. H. & Gordon, M. S. (1995). J. Am. Chem. Soc. 117, 8159–8170.  CrossRef CAS Web of Science Google Scholar
First citationLaar, B. van & Yelon, W. B. (1984). J. Appl. Cryst. 17, 47–54.  CrossRef Web of Science IUCr Journals Google Scholar
First citationLarson, A. C. & Von Dreele, R. B. (2001). GSAS, General Structure Analysis System. Los Alamos National Laboratory, Los Alamos, New Mexico, USA.  Google Scholar
First citationMó, O., Yañez, M. & Elguero, J. (1992). J. Chem. Phys. 97, 6628–6638.  CrossRef CAS Google Scholar
First citationMó, O., Yañez, M., Rozas, J. & Elguero, J. (1994). Chem. Phys. Lett. 219, 45–52.  CrossRef CAS Web of Science Google Scholar
First citationMora, A. J., Delgado, G., Ramírez, B., Cuervo, J., Rincón, L., Almeida R. & Bashas, A. (2002). J. Mol. Struct. 615, 201–208.  Google Scholar
First citationNagy, P. I. & Noszl, B. (2000). J. Phys. Chem. A, 104, 6834–6843.  Web of Science CrossRef CAS Google Scholar
First citationRietveld, H. M. (1969). J. Appl. Cryst. 2, 65–71.  CrossRef CAS IUCr Journals Web of Science Google Scholar
First citationRincón, L., Almeida, R., García-Aldea, D. & Diez y Riega, H. (2001). J. Chem. Phys. 114, 5552–5563.  Google Scholar
First citationSmith, G. S. & Snyder, R. L. (1979). J. Appl. Cryst. 12, 60–65.  CrossRef CAS IUCr Journals Web of Science Google Scholar
First citationSpek, A. L. (2003). J. Appl. Cryst. 36, 7–13.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationStephens, P. W. (1999). J. Appl. Cryst. 32, 281–289.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationTajkhorshid, E., Jalkanen, K. J. & Suhai, J. S. (1998). Phys. Chem. B, 102, 5899–5913.  Web of Science CrossRef CAS Google Scholar
First citationToby, B. H. (2001). J. Appl. Cryst. 34, 210–213.  Web of Science CrossRef CAS IUCr Journals Google Scholar

© International Union of Crystallography. Prior permission is not required to reproduce short quotations, tables and figures from this article, provided the original authors and source are cited. For more information, click here.

Journal logoSTRUCTURAL SCIENCE
CRYSTAL ENGINEERING
MATERIALS
ISSN: 2052-5206
Follow Acta Cryst. B
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds