Photochromism in a New Light: Temperature-Dependent in situ Photocrystallography

Organic photochromic molecules including diarylethenes are of particular interest for their potential applications in fields of high density optical data storage and light-activated switches, among many others. However, one of the limitations in diarylethene-based systems has been the low photoconversion observed in neat single crystals which is often less than 20%. The low conversion is typically believed to be the result of screening effects in which the photoisomerized molecules at the surface absorb incident light preventing full isomerization of the crystal. To assess the effect of screening on a model diarylethene system, photocrystallographic experiments on microcrystals of the compound were performed using synchrotron radiation at the Advanced Photon Source at Argonne National Labs. During the course of the study, we discovered that the photoconversion of the diarylethene crystals exhibits highly unusual temperature dependent behavior which is incongruent with current computational models of diarylethene photochemistry. Herein we report the first temperature-dependent `constant irradiation' in situ photocrystallography experiments performed on a photochromic system. Through the application of this technique, combined with spectroscopic analysis, we demonstrate that the steady-state population arising from the photo-cyclization reaction shows a temperature dependence which has been heretofore unobserved. Possible explanations for this anomalous behavior and its role in the photochemical reactivity of this and other diarylethene systems will be presented.

First steps towards time-resolved 'in-house' X-ray diffraction experiments

High-intensity X-ray sources, such as synchrotrons or X-ray free electron lasers, providing up to 100 ps time-resolution allow for studying very short-lived excited electronic states in molecular crystals. Some recent examples constitute investigations of Rh...Rh bond shortening,[1] or metal-to-ligand charge transfer processes in CuI complexes.[2] Nevertheless, in cases in which the lifetime of excited state species exceeds 10 μs it is now possible, due to the dramatic increase in the brightness of X-ray sources and the sensitivity of detectors, to use laboratory equipment to explore structural changes upon excitation. Consequently, in this contribution we present detailed technical description of the 'in-house' X-ray diffraction setup allowing for the laser-pump X-ray-probe experiments within the time-resolution at the order of 10 μs or larger. The experimental setup consists of a modified Bruker Mo-rotating-anode diffractometer, coupled with the high-frequency Nd:YAG laser (λ = 355 nm). The required synchronization of the laser pulses and the X-ray beam is realized via the optical chopper mounted across the beam-path. Chopper and laser capabilities enable high-repetition-rate experiments reaching up to 100 kHz. In addition, the laser shutter is being directly controlled though the original diffractometer software, allowing for collection of the data in a similar manner as done at the synchrotron (alternating light-ON & light-OFF frames). The laser beam itself is split into two allowing for improved uniform light delivery onto the crystal specimen. The designed setup was tested on the chosen set of crystals exhibiting rather long-lived excited state, such as, the Cu2Br2L2 (L = C5H4N-NMe2) complex, for which the determined lifetime is about 100 μs at 90 K. The results shall be presented. Research is funded by the National Science Foundation (CHE1213223). KNJ is supported by the Polish Ministry of Science and Higher Education through the "Mobility Plus" program.

Selective time-dependent changes of Cu(DPPE)(DMP)·PF₆ on photoexcitation

Thanks to their potential applications as light-emitting devices, chemical sensors and dye-sensitized solar cells, heteroleptic copper (I) complexes have been extensively studied. Cu(DPPE)(DMP)·PF₆ (dppe= 1,2-bis(diphenylphosphino)ethane; dmp = 2,9-dimethyl-1,10-phenanthroline) crystallizes in the monoclinic system, P2₁/c, with two independent molecules in the asymmetric unit. Previous studies on this system [1,2] show strong temperature-dependent emission. The complex was studied at 90K under 355nm laser excitation. At this temperature, the luminescence decay for Cu(DPPE)(DMP)·PF₆ is biexponential with lifetimes of ~3μs and ~28μs. Two time-resolved X-ray diffraction techniques were applied for studies: (1) a Laue technique at BioCARS ID-14 beamline at the Advanced Photon Source, and (2) monochromatic diffraction at a newly constructed in-house pump-probe monochromatic facility at the University at Buffalo. Structural changes determined with the two methods are in qualitative agreement; discrepancies in position of the Cu and P atoms were observed. The molecular distortions were smaller than those determined at 16K in the earlier synchrotron study by Vorontsov et al. [2]. Photodeformation maps (see Figure below), in which the increase in temperature on photoexcitation has been eliminated, clearly illustrate the photoinduced atomic shifts for both data sets. Results will be compared with those obtained for other studied heteroleptic copper (I) complexes, for instance Cu[(1,10-phenanthroline-N,N′) bis(triphenylphosphine)]·BF₄ [3]. The in-house pump-probe facility is discussed by Radoslaw Kaminski at this meeting. Research funded by the National Science Foundation (CHE1213223). BioCARS Sector 14 at APS is supported by NIH (RR007707). The Advanced Photon Source is funded by the Office of Basic Energy Sciences, U.S. Department of Energy, (W-31-109-ENG-38). KNJ is supported by the Polish Ministry of Science and Higher Education through the "Mobility Plus" program.

Recent Progress in the Synthesis and Characterization of Diarylethene-based MOFs

Metal-organic Frameworks (MOFs) remain an extremely active area of research given the wide variety of potential applications and the enormous diversity of structures that can be created from their constituent building blocks. While MOFs are typically employed as passive materials, next-generation materials will exhibit structural and/or electronic changes in response to applied external stimuli including light, charge, and pH. Herein we present recent results in which advanced photochromic diarylethenes are combined with MOFs through covalent and non-covalent methods to create photo-responsive permanently porous crystalline materials. This presentation will describe the design, synthesis, and characterization of next-generation photo-switchable diarylethene based ligands which are subsequently used to photo-responsive MOFs. These UBMOF crystals are, by design, isostructural with previously reported non-photoresponsive frameworks which enables a systematic comparison of their physical and chemical properties. While the photoswitching of the isolated ligand in solution is fully reversible, the cycloreversion reaction is suppressed in the UBMOF single crystalline phase. Spectroscopic evidence for thermally induced cycloreversion will be presented, as well as a detailed analysis addressing the limits of X-ray diffraction techniques applied to these systems.