research communications\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Crystal structure of poly[tetra-μ2-cyanido-1:2κ8N:C-bis­­(di­methyl sulfoxide-1κO)diargentate(I)iron(II)]

CROSSMARK_Color_square_no_text.svg

aDepartment of Chemistry, Taras Shevchenko National University of Kyiv, Volodymyrska St. 64, Kyiv 01601, Ukraine, bNational O.O. Bogomoletz Medical University, 13 T. Shevchenko Blvd., Kyiv, Ukraine, and cL. V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, Prospekt Nauky 31, Kyiv 01601, Ukraine
*Correspondence e-mail: lesya.kucheriv@gmail.com

Edited by D.-J. Xu, Zhejiang University (Yuquan Campus), China (Received 8 January 2017; accepted 20 January 2017; online 27 January 2017)

In the title polymeric complex, [Fe{OS(CH3)2}2{Ag(CN)2}2], the FeII cation is located at an inversion centre and is coordinated by four cyanide (CN) anions and two dimethyl sulfoxide mol­ecules in a slightly compressed N4O2 octa­hedral geometry, the AgI cation is C-coordinated by two CN anions in a nearly linear geometry. The CN anions bridge the FeII and AgI cations to form a two-dimensional polymeric structure extending parallel to (102). In the crystal, the nearest Ag⋯Ag distance between polymeric sheets is 3.8122 (12) Å. The crystal studied was a twin with a contribution of 0.2108 (12) for the minor component.

1. Chemical context

Metal–organic frameworks (MOFs), also known as porous coordination polymers, form a group of compounds that consist of metal ions and organic ligand linkers (Zhou & Kitagawa, 2014[Zhou, H.-C. & Kitagawa, S. (2014). Chem. Soc. Rev. 43, 5415-5418.]). MOFs have attracted considerable attention over the past decades due to the ability to tune their porosity, structure and other properties by a rational choice of the metal and linkers. Despite the fact that the most investigated properties of MOFs are gas storage and separation, it has been shown that the incorporation of corresponding building blocks or guests into MOFs can provoke specific functional magnetic, chiral, catalytic, conductive, luminescence and other properties.

[Scheme 1]

Hofmann clathrate analogues represent a huge group of MOFs. The first prototype clathrate of this family was [Ni(NH3)2{Ni(CN)4}] reported by Hofmann & Küspert (1897[Hofmann, K. A. & Küspert, F. (1897). Z. Anorg. Chem. 15, 204-207.]), however its structure was only obtained by Powell & Rayner (1949[Powell, H. M. & Rayner, J. H. (1949). Nature, 163, 566-567.]). The structure analysis showed that the coordination framework of this complex is supported by bridging square-planar tetracyanidonickelate ligands, and the octahedral coordination sphere of NiII is completed by two NH3 mol­ecules. The layers in this clathrate are separated by ∼8 Å, which leads to the formation of guest-accessible cavities. This has allowed a series of clathrates to obtained with different aromatic guests such as benzene, phenol, aniline, pyridine, thio­phene and pyrrole. Later, the group of Hofmann clathrate analogues was expanded to [M(L)2{M′(CN)4}] where M = Fe2+, Co2+, Ni2+, Cu2+, Zn2+, Cd2+ and Mn2+, M′ = Ni2+, Pd2+, Pt2+ and L is either a unidentate or bridging ligand to form two- or three-dimensional coordination frameworks, respectively.

More importantly, due to the rational choice of ligand, Kitazawa et al. (1996[Kitazawa, T., Gomi, Y., Takahashi, M., Takeda, M., Enomoto, M., Miyazaki, A. & Enoki, T. (1996). J. Mater. Chem. 6, 119-121.]) succeeded in obtaining the first Hofmann-type complex [Fe(py)2{Ni(CN)4}] that exhibited spin-crossover behavior. This phenomenon is a spectacular ability of some 3d metals to exist in two different spin states. This discovery has led to multiple attempts to modify this compound in order to obtain other spin-crossover materials. The main synthetic approaches are: (a) the change of the pyridine ligand to other unidentate or bridging ligands; (b) the induction of various guest mol­ecules that influence spin-crossover characteristics; (c) use of different square-planar {[M(CN)4]2−, M = Ni2+, Pt2+, Pd2+; Kucheriv et al., 2016[Kucheriv, O. I., Shylin, S. I., Ksenofontov, V., Dechert, S., Haukka, M., Fritsky, I. O. & Gural'skiy, I. A. (2016). Inorg. Chem. 55, 4906-4914.]}, dodeca­hedral {[Nb(CN)8]4−; Ohkoshi et al., 2013[Ohkoshi, S., Takano, S., Imoto, K., Yoshikiyo, M., Namai, A. & Tokoro, H. (2013). Nat. Photonics, 8, 65-71.]} or linear {[M(CN)2], M = Ag+, Au+; Gural'skiy et al., 2016b[Gural'skiy, I. A., Shylin, S. I., Golub, B. O., Ksenofontov, V., Fritsky, I. O. & Tremel, W. (2016b). New J. Chem. 40, 9012-9016.]} linkers. Here we offer a new Hofmann-like coordination compound with general formula [Fe(dmso)2{Ag(CN)2}2] in which the FeII atoms are stabilized in a high-spin state.

2. Structural commentary

The crystal structure of the title compound was determined from 243 K data. The FeII cation is located at an inversion centre and coordinated by four CN anions and two di­methyl­sulfoxide mol­ecules in a slightly compressed N4O2 octa­hedral environment (Fig. 1[link]). The AgI cation is C-coord­inated by two CN anions in a nearly linear mode [C1—Ag—C2 = 173.0 (3)°]. The CN anions bridge the FeII and AgI cations to form a two-dimensional polymeric structure. In the structure, the equatorial Fe—N bonds [2.166 (4) and 2.176 (4) Å] have the typical value for FeII in a high-spin state. The axial positions of the FeII cation are occupied by two di­methyl­sulfoxide mol­ecules with an Fe—O bond length of 2.096 (4) Å. The S=O bond length of 1.532 (4) Å is increased by 0.03 Å with respect to non-coord­inating dmso; the average S—C bond of 1.774 (6) Å is shorter than in those in non-coordinating di­methyl­sulfoxide. This is a typical value for O-bonded di­methyl­sulfoxide complexes (Calligaris, 2004[Calligaris, M. (2004). Coord. Chem. Rev. 248, 351-375.]). The torsion angles around the Fe—O bond are Fe1—O1—S1—C3 = 96.3 (3)° and Fe1—O1—S1—C4 = −159.2 (3)°. The polyhedral distortion which is described by the deviation from an octa­hedral geometry is ΣFe|90 − Θ| = 9.86 (16)° where Θ is the N—Fe—N or O—Fe—N angle in the coordination environment of the metal; however, this value is slightly lower than expected for a high-spin FeII complex.

[Figure 1]
Figure 1
coordination environments of the FeII and AgI atoms in the structure of the title compound, showing the atom-labelling scheme, with displacement ellipsoids are drawn at the 50% probability level. [Symmetry codes: (i) 2 − x, 1 − y, 1 − z; (ii) 1 + x, [{3\over 2}] − y, [{1\over 2}] + z; (iii) 1 − x, −[{1\over 2}] + y, [{1\over 2}] − z.]

3. Supra­molecular features

The coordination framework is connected by bridging di­cyanido­argentate moieties into a two-dimensional grid that propagates along the (102) plane (Fig. 2[link]a). The short inter­layer Ag⋯Ag distance of 3.8122 (12) Å indicates argentophilic inter­actions that propagate along the c-axis direction. A similar type of inter­molecular bonding between seemingly closed-shell metal atoms has previously been reported for many Ag- and Au-containing Hofmann-type structures, e.g. Au⋯Au distances of 3.3792 (3) Å were found between the [Fe{Au(CN)2}] planes (Gural'skiy et al., 2016a[Gural'skiy, I. A., Golub, B. O., Shylin, S. I., Ksenofontov, V., Shepherd, H. J., Raithby, P. R., Tremel, W. & Fritsky, I. O. (2016a). Eur. J. Inorg. Chem. pp. 3191-3195.]). In addition, in the title compound the Fe—N—C and Ag—C—N linkages show a slight deviation from linearity (9.5 and 6° on average, respectively) that leads to a slight corrugation of [Fe{Ag(CN)2}] layers (Fig. 2[link]b).

[Figure 2]
Figure 2
(a) View of the crystal structure of the title compound in the ab plane. H atoms have been omitted for clarity. (b) View of the crystal structure showing the two-dimensional layers. Colour key: brown Fe, green Ag, yellow S, blue N, grey C and red O.

4. Database survey

The title compound has never been obtained before. A database survey reveals numerous Fe–Ag CN-bridged frameworks supported by various co-ligands axially bound to the iron atoms.

5. Synthesis and crystallization

Crystals of the title compound were obtained by the slow-diffusion method within three layers in 10 ml tubes: the first layer was a solution of Fe(ClO4)2 (0.1 mmol, 26 mg) in di­methyl­sulfoxide (2 ml); second one was a di­methyl­sulfoxide–ethanol mixture (1:1, 5 ml); the third was a solution of K[Ag(CN)2] (0.1 mmol, 20 mg) in an ethanol–water mixture (9:1 ratio v/v, 2 ml). After two weeks, orange crystals grew in the second layer; they were collected and kept under the mother solution prior to the measurements.

6. Refinement

Crystal data, data collection and structure refinement details are summarized in Table 1[link]. All H atoms of methyl groups were placed geometrically at their expected calculated positions with C—H = 0.97 Å and Uiso(H) = 1.5Ueq(C). The idealized CH3 group was fixed using an AFIX 137 command that allowed the H atoms to ride on C atom and rotate around S—C bond. Twining of two components was considered with the transformation matrix ([\overline{1}] 0 [\overline{1}] 0 [\overline{1}] 0 0 0 1) and a twin contribution of BASF = 0.2108 (12).

Table 1
Experimental details

Crystal data
Chemical formula [Ag2Fe(CN)4(C2H6OS)2]
Mr 531.93
Crystal system, space group Monoclinic, P21/c
Temperature (K) 243
a, b, c (Å) 8.4125 (16), 14.492 (3), 7.4679 (14)
β (°) 116.053 (4)
V3) 817.9 (3)
Z 2
Radiation type Mo Kα
μ (mm−1) 3.50
Crystal size (mm) 0.15 × 0.1 × 0.05
 
Data collection
Diffractometer Bruker SMART
Absorption correction Multi-scan (SADABS; Bruker, 2013[Bruker (2013). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.])
Tmin, Tmax 0.625, 0.746
No. of measured, independent and observed [I > 2σ(I)] reflections 16468, 1970, 1726
Rint 0.045
(sin θ/λ)max−1) 0.661
 
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.031, 0.071, 1.16
No. of reflections 1970
No. of parameters 91
H-atom treatment H-atom parameters constrained
Δρmax, Δρmin (e Å−3) 0.42, −1.05
Computer programs: SMART and SAINT (Bruker, 2013[Bruker (2013). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]), SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]), SHELXL2014 (Sheldrick, 2015[Sheldrick, G. M. (2015). Acta Cryst. C71, 3-8.]), DIAMOND (Brandenburg et al., 1999[Brandenburg, K. (1999). DIAMOND. Crystal Impact GbR, Bonn, Germany.]) and publCIF (Westrip, 2010[Westrip, S. P. (2010). J. Appl. Cryst. 43, 920-925.]).

Supporting information


Computing details top

Data collection: SMART (Bruker, 2013); cell refinement: SAINT (Bruker, 2013); data reduction: SAINT (Bruker, 2013); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL2014 (Sheldrick, 2015); molecular graphics: DIAMOND (Brandenburg et al., 1999); software used to prepare material for publication: publCIF (Westrip, 2010).

Poly[tetra-µ2-cyanido-1:2κ8N:C-bis(dimethyl sulfoxide-1κO)diargentate(I)iron(II)] top
Crystal data top
[Ag2Fe(CN)4(C2H6OS)2]F(000) = 512
Mr = 531.93Dx = 2.160 Mg m3
Monoclinic, P21/cMo Kα radiation, λ = 0.71073 Å
a = 8.4125 (16) ÅCell parameters from 4840 reflections
b = 14.492 (3) Åθ = 2.7–26.2°
c = 7.4679 (14) ŵ = 3.50 mm1
β = 116.053 (4)°T = 243 K
V = 817.9 (3) Å3Plate, orange
Z = 20.15 × 0.1 × 0.05 mm
Data collection top
Bruker SMART
diffractometer
1726 reflections with I > 2σ(I)
φ and ω scansRint = 0.045
Absorption correction: multi-scan
(SADABS; Bruker, 2013)
θmax = 28.0°, θmin = 1.4°
Tmin = 0.625, Tmax = 0.746h = 1111
16468 measured reflectionsk = 1919
1970 independent reflectionsl = 89
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.031H-atom parameters constrained
wR(F2) = 0.071 w = 1/[σ2(Fo2) + (0.0068P)2 + 2.779P]
where P = (Fo2 + 2Fc2)/3
S = 1.16(Δ/σ)max = 0.001
1970 reflectionsΔρmax = 0.42 e Å3
91 parametersΔρmin = 1.05 e Å3
0 restraints
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Ag10.45426 (6)0.72349 (3)0.33300 (9)0.05178 (15)
Fe11.00000.50000.50000.0255 (2)
S11.17380 (18)0.39095 (9)0.9253 (2)0.0377 (3)
C31.3090 (7)0.4721 (4)1.1049 (9)0.0494 (16)
H3A1.35670.51581.04270.074*
H3B1.40540.44021.21190.074*
H3C1.23890.50491.15860.074*
C41.0778 (8)0.3340 (4)1.0651 (9)0.0478 (15)
H4A1.01940.37891.11210.072*
H4B1.16970.30291.17820.072*
H4C0.99200.28900.98110.072*
O11.0225 (5)0.4471 (3)0.7713 (5)0.0376 (8)
N10.7675 (5)0.5774 (3)0.4638 (7)0.0349 (10)
C10.6498 (6)0.6262 (4)0.4204 (9)0.0404 (12)
N20.1741 (5)0.8859 (3)0.1555 (7)0.0391 (11)
C20.2720 (7)0.8283 (4)0.2252 (10)0.0419 (13)
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Ag10.03045 (19)0.0337 (2)0.0765 (3)0.01486 (16)0.0099 (2)0.0063 (2)
Fe10.0182 (4)0.0186 (4)0.0328 (5)0.0011 (3)0.0048 (4)0.0001 (4)
S10.0387 (7)0.0344 (6)0.0375 (7)0.0129 (5)0.0146 (6)0.0053 (5)
C30.029 (3)0.057 (4)0.053 (4)0.006 (2)0.010 (3)0.008 (3)
C40.057 (4)0.035 (3)0.045 (3)0.007 (3)0.017 (3)0.002 (3)
O10.0322 (18)0.041 (2)0.034 (2)0.0086 (16)0.0097 (16)0.0076 (17)
N10.0260 (19)0.033 (2)0.039 (3)0.0043 (16)0.0084 (18)0.0005 (19)
C10.028 (2)0.035 (3)0.051 (3)0.006 (2)0.011 (2)0.001 (3)
N20.025 (2)0.027 (2)0.054 (3)0.0036 (17)0.007 (2)0.001 (2)
C20.028 (2)0.031 (3)0.057 (4)0.003 (2)0.009 (3)0.000 (3)
Geometric parameters (Å, º) top
Ag1—C12.044 (5)S1—O11.523 (4)
Ag1—C22.054 (5)C3—H3A0.9700
Fe1—O1i2.096 (4)C3—H3B0.9700
Fe1—O12.096 (4)C3—H3C0.9700
Fe1—N12.166 (4)C4—H4A0.9700
Fe1—N1i2.166 (4)C4—H4B0.9700
Fe1—N2ii2.176 (4)C4—H4C0.9700
Fe1—N2iii2.176 (4)N1—C11.142 (6)
S1—C31.771 (6)N2—Fe1iv2.176 (4)
S1—C41.778 (6)N2—C21.127 (6)
C1—Ag1—C2173.0 (3)O1—S1—C4104.3 (3)
O1i—Fe1—O1180.0S1—C3—H3A109.5
O1—Fe1—N1i89.82 (16)S1—C3—H3B109.5
O1—Fe1—N190.18 (16)S1—C3—H3C109.5
O1i—Fe1—N189.82 (16)H3A—C3—H3B109.5
O1i—Fe1—N1i90.18 (16)H3A—C3—H3C109.5
O1i—Fe1—N2ii89.54 (17)H3B—C3—H3C109.5
O1—Fe1—N2iii89.54 (17)S1—C4—H4A109.5
O1i—Fe1—N2iii90.46 (17)S1—C4—H4B109.5
O1—Fe1—N2ii90.46 (17)S1—C4—H4C109.5
N1—Fe1—N1i180.0H4A—C4—H4B109.5
N1i—Fe1—N2iii91.82 (16)H4A—C4—H4C109.5
N1i—Fe1—N2ii88.18 (16)H4B—C4—H4C109.5
N1—Fe1—N2ii91.83 (16)S1—O1—Fe1128.0 (2)
N1—Fe1—N2iii88.17 (16)C1—N1—Fe1168.3 (5)
N2ii—Fe1—N2iii180.0N1—C1—Ag1173.7 (5)
C3—S1—C499.8 (3)C2—N2—Fe1iv173.6 (5)
O1—S1—C3105.2 (3)N2—C2—Ag1175.5 (6)
C3—S1—O1—Fe196.3 (3)C4—S1—O1—Fe1159.2 (3)
Symmetry codes: (i) x+2, y+1, z+1; (ii) x+1, y+3/2, z+1/2; (iii) x+1, y1/2, z+1/2; (iv) x+1, y+1/2, z+1/2.
 

Funding information

Funding for this research was provided by: Ministry of Education and Science of Ukraine (award No. 16BF037-01M).

References

First citationBrandenburg, K. (1999). DIAMOND. Crystal Impact GbR, Bonn, Germany.  Google Scholar
First citationBruker (2013). SMART, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationCalligaris, M. (2004). Coord. Chem. Rev. 248, 351–375.  Web of Science CrossRef CAS Google Scholar
First citationGural'skiy, I. A., Golub, B. O., Shylin, S. I., Ksenofontov, V., Shepherd, H. J., Raithby, P. R., Tremel, W. & Fritsky, I. O. (2016a). Eur. J. Inorg. Chem. pp. 3191–3195.  Google Scholar
First citationGural'skiy, I. A., Shylin, S. I., Golub, B. O., Ksenofontov, V., Fritsky, I. O. & Tremel, W. (2016b). New J. Chem. 40, 9012–9016.  CAS Google Scholar
First citationHofmann, K. A. & Küspert, F. (1897). Z. Anorg. Chem. 15, 204–207.  CrossRef CAS Google Scholar
First citationKitazawa, T., Gomi, Y., Takahashi, M., Takeda, M., Enomoto, M., Miyazaki, A. & Enoki, T. (1996). J. Mater. Chem. 6, 119–121.  CSD CrossRef CAS Web of Science Google Scholar
First citationKucheriv, O. I., Shylin, S. I., Ksenofontov, V., Dechert, S., Haukka, M., Fritsky, I. O. & Gural'skiy, I. A. (2016). Inorg. Chem. 55, 4906–4914.  CSD CrossRef CAS Google Scholar
First citationOhkoshi, S., Takano, S., Imoto, K., Yoshikiyo, M., Namai, A. & Tokoro, H. (2013). Nat. Photonics, 8, 65–71.  CSD CrossRef Google Scholar
First citationPowell, H. M. & Rayner, J. H. (1949). Nature, 163, 566–567.  CrossRef CAS Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSheldrick, G. M. (2015). Acta Cryst. C71, 3–8.  Web of Science CrossRef IUCr Journals Google Scholar
First citationWestrip, S. P. (2010). J. Appl. Cryst. 43, 920–925.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationZhou, H.-C. & Kitagawa, S. (2014). Chem. Soc. Rev. 43, 5415–5418.  Web of Science CrossRef CAS PubMed Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds