research communications\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Crystal structure of catena-poly[[aquadi-n-propyl­tin(IV)]-μ-oxalato]

aInstitut für Chemie neuer Materialien, Universität Osnabrück, Barbarastrasse 7, D-49069 Osnabrück, Germany
*Correspondence e-mail: hreuter@uos.de

Edited by M. Weil, Vienna University of Technology, Austria (Received 26 June 2014; accepted 1 July 2014; online 19 July 2014)

The title compound, [Sn(C3H7)2(H2O)(C2O4)]n, represents the first diorganotin(IV) oxalate hydrate to be structurally characterized. The tin(IV) atom of the one-dimensional coordination polymer is located on a twofold rotation axis and is coordinated by two chelating oxalate ligands with two slightly different Sn—O bond lengths of 2.290 (2) and 2.365 (2) Å, two symmetry-related n-propyl groups with a Sn—C bond lengths of 2.127 (3) Å, and a water mol­ecule with a Sn—O bond length of 2.262 (2) Å. The coordination polyhedron around the SnIV atom is a slightly distorted penta­gonal bipyramid with a nearly linear axis between the trans-oriented n-propyl groups [C—Sn—C = 176.8 (1)°]. The bond angles between the oxygen atoms of the equatorial plane range from 70.48 (6)° to 76.12 (8)°. A one-dimensional coordination polymer results from the less asymmetric bilateral coordination of the centrosymmetric oxalate anion, inter­nally reflected by two slightly different C—O bond lengths of 1.248 (3) and 1.254 (3) Å. The chains of the polymer propagate parallel to [001] and are held together by hydrogen bonds between water mol­ecules and oxalate anions of neighboring chains, leading to a two-dimensional network parallel to (100).

1. Chemical context

In a previous paper (Reichelt & Reuter, 2014[Reichelt, M. & Reuter, H. (2014). Acta Cryst. E70, m133.]), we described the formation and structure of the first diorganotin(IV) oxalate (Ox), (R2Sn)Ox for R = t-butyl in the course of a systematical study on the reaction of diorganotin(IV) oxides with nitric acid (Reuter & Reichelt, 2014a[Reuter, H. & Reichelt, M. (2014a). Can. J. Chem. 92, 471-483.],b[Reuter, H. & Reichelt, M. (2014b). Can. J. Chem. 92, 484-495.]). Applying similar reaction conditions to di-n-propyl­tin oxide resulted in the formation of the title compound as an unexpected side product. This diorganotin(IV) oxalate hydrate gives new insights into the structural chemistry of organotin(IV) oxalates.

[Scheme 1]

2. Database survey

Up to now, organotin(IV) oxalates were limited to a few representatives with general formula (R3Sn)2Ox, viz. R = phenyl (Diop et al., 2003[Diop, L., Mahieu, B., Mahon, M. F., Molloy, K. C. & Okio, K. Y. A. (2003). Appl. Organomet. Chem. 17, 881-882.]); R = cyclo­hexyl (Ng et al., 1994[Ng, S. W., Kumar Das, V. G., Li, S.-L. & Mak, T. C. W. (1994). J. Organomet. Chem. 467, 47-49.]) and a Lewis-base-stabilized one with general formula [R3Sn(LB)]2Ox, viz. R = methyl, LB = H2O (Diop et al., 1997[Diop, L., Mahon, M. F., Molloy, K. C. & Sidibe, M. (1997). Main Group Met. Chem. 20, 649-654.]).

3. Structural commentary

The asymmetric unit of the title compound comprises one half of the formula unit (Fig. 1[link]), consisting of an SnIV atom lying on a twofold rotation axis, a water mol­ecule with the O atom on the same rotation axis as the Sn atom, a bilateral chelating centrosymmetric oxalate anion and an n-propyl group attached to the Sn atom in general positions. Different from the unsubstituted t-butyl oxalate (Reichelt & Reuter, 2014[Reichelt, M. & Reuter, H. (2014). Acta Cryst. E70, m133.]), the SnIV atom is sevenfold coordinated by two n-propyl groups, four oxygen atoms of two symmetry-related oxalate anions and one water mol­ecule.

[Figure 1]
Figure 1
Ball-and-stick model of one formula unit in the crystal structure of the title compound with the atomic numbering scheme used. With exception of the H atoms, which are shown as spheres of arbitrary radius, all other atoms are drawn as displacement ellipsoids at the 50% probability level. [Symmetry codes: (1) 1 − x, y, ½ − z; (2) 1 − x, −y, 1 − z.]

As a result of of symmetry, both Sn—C bond lengths are of equal length. At 2.127 (3) Å, they are considerably shorter than the Sn—C bond lengths of 2.186 (2) and 2.190 (2) Å in the di-t-butyl tin oxalate although the higher coordination number of the Sn atom in the hydrate compared with the Sn atom in the pure oxalate should result in longer bonds. This reflects the influence of the organic part (n-propyl versus t-but­yl) on Sn—C bond length, as already mentioned by Britton (2006[Britton, D. (2006). Acta Cryst. C62, m93-m94.]). The n-propyl group itself is well ordered as can be deduced from the aniostropic displacement parameters as well as from the C—C bond lengths of 1.521 (3) and 1.522 (4) Å, which are in good agreement with the values reported by Allen et al. (1987[Allen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans. 2, pp. S1-19.]) for sp3-hybridized carbon atoms [1.513 (14) for –CH2—CH3, 1.524 (14) Å for –CH2—CH2–]. The corresponding bond angles are 117.0 (2) at C11 and 112.1 (2)° at C12. All in all, this group adopts a nearly staggered conformation with an Sn1—C11—C12—C13 torsion angle of −174.3 (2)°. Although both n-propyl groups attached to the Sn atom are related to each other by the twofold rotation axis, the bond angle is not exactly 180° because the Sn—C bond is not exactly perpendicular to this axis.

The two symmetry-related oxalate anions coordinate side-on to the Sn atom with only slightly different Sn—O bond lengths [Sn1—O2 = 2.290 (2) Å and Sn1—O1 = 2.365 (2) Å]. This symmetrical coordination mode is in sharp contrast to the asymmetrical coordination mode of the oxalate anions in the anhydrous t-butyl compound [2.150 (1) to 2.4245 (1) Å] and is also reflected in C—O bond lengths which are much more closer to each other [C—O = 1.248 (3)/1.254 (3) Å, Δ = 0.006 Å] than in the t-butyl compound [1.242 (1)/1.269 (1) Å, Δ = 0.027 Å] as an expression of more delocalized C=O bonds. The oxalate ion itself is planar as it belongs to point group Ci and exhibits a C—C bond length of 1.549 (4) Å, [1.545 (3) Å], which is slightly longer than a normal bond between two sp2-hybridized C atoms. From the bilateral, side-on coordination mode of the oxalate anion to the organotin moieties, a one-dimensional coordination polymer parallel to [001] results (Fig. 2[link]).

[Figure 2]
Figure 2
Stick-model showing a part of the one-dimensional coordination polymer. Colour code: Sn = bronze, O = red, C = dark grey, H = light grey.

It is remarkable that the sevenfold coordination of the Sn atom corresponds to a penta­gonal bipyramid (Fig. 3[link]). The axis formed by the two n-propyl groups is only slightly bent [176.8 (1)°] at the Sn atom. Only one [O1—Sn1—O1i = 76.12 (8)°] of the five [O3—Sn1—O2ii/O2iii = 71.60 (4)°; O1/O1i—Sn1—O2iii = 70.48 (6)°; for symmetry codes see the Supporting information] bond angles between the O atoms of the equatorial plane deviates significantly from the ideal value of 72°. These structural features are caused (i) by the distance of the chelating oxalate anion to the Sn atom, (ii) by the symmetrical position of the water mol­ecule exactly between the two oxalate anions, and (iii) by a tilt of the plane of the oxalate anions relative to the least-squares plane through the atoms of the equatorial plane.

[Figure 3]
Figure 3
Schematic representation of the penta­gonal-bipyramidal coordination polyhedron around the Sn atom.

4. Supra­molecular features

In the solid state, this coordination polymer is stabilized by hydrogen bonds (Table 1[link]) between the water mol­ecule of one chain as donor and the oxygen atom of the oxalate ion of neighboring chains as acceptor, and vice versa. As the plane of the water mol­ecule coincides with the propagation plane of the coordination polymer, an almost planar, two-dimensional linkage of the chains results (Fig. 4[link]). These planes are staggered one above the other with the n-propyl groups of one plane protruding into the shell of n-propyl groups of the neighboring plane (Fig. 5[link]).

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
O3—H3⋯O1i 0.96 1.87 2.741 (3) 149
Symmetry code: (i) x, y+1, z.
[Figure 4]
Figure 4
Part of the hydrogen-bonding (red dashed lines) system between adjacent chains of the one-dimensional coordination polymer. [Symmetry codes: (1) 1 − x, y, ½ − z; (2) x, 1 + y, z; (3) 1 − x, 1 + y, ½ − z.]
[Figure 5]
Figure 5
Perspective view of the crystal structure parallel to [001], looking down the chains of the one-dimensional coordination polymer.

5. Synthesis and crystallization

Single crystals of the title compound were obtained as side products during the reaction of di-n-propyl­tin(IV) oxide with a large excess of concentrated nitric acid in ethanol. In a typical experiment, a mixture of 0.32 g (1.45 mmol) nPr2SnO and 1.5 ml (21 mmol) HNO3 (Merck, 65%wt) in 5 ml ethanol was stirred at room temperature for several hours until a clear solution was obtained. Slow evaporation of solvents during some weeks resulted in the formation of colorless, block-shaped crystals of the title compound as well as crystals of an up-to-now unidentified reaction product. A suitable single crystal was selected under a polarization microscope and mounted on a 50 µm MicroMesh MiTeGen MicromountTM using FROMBLIN Y perfluoro­polyether (LVAC 16/6, Aldrich).

6. Refinement

All hydrogen atoms could be localized in difference Fourier syntheses. Those of the n-propyl group were idealized and refined at calculated positions riding on the carbon atoms with C—H distances of 0.99 Å (–CH2–) and 0.98 Å (–CH3). Those of the water mol­ecule were refined with respect to a common O—H distance of 0.96 Å and an H—O—H bond angle of 104.5° before they were fixed and allowed to ride on the corresponding oxygen atom. For the hydrogen atoms of the n-propyl group, a common isotropic displacement parameter was refined as well as one common isotropic displacement parameter for the hydrogen atoms of the water mol­ecule. Experimental details are summarized in Table 2[link].

Table 2
Experimental details

Crystal data
Chemical formula [Sn(C3H7)2(C2O4)(H2O)]
Mr 310.90
Crystal system, space group Monoclinic, C2/c
Temperature (K) 100
a, b, c (Å) 16.6490 (8), 6.4457 (3), 11.5438 (6)
β (°) 116.772 (2)
V3) 1106.02 (9)
Z 4
Radiation type Mo Kα
μ (mm−1) 2.31
Crystal size (mm) 0.20 × 0.15 × 0.10
 
Data collection
Diffractometer Bruker APEXII CCD
Absorption correction Multi-scan (SADABS; Bruker, 2009[Bruker (2009). APEX2, SADABS and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.])
Tmin, Tmax 0.657, 0.811
No. of measured, independent and observed [I > 2σ(I)] reflections 19736, 1327, 1255
Rint 0.062
(sin θ/λ)max−1) 0.660
 
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.024, 0.058, 1.11
No. of reflections 1327
No. of parameters 68
H-atom treatment H-atom parameters constrained
Δρmax, Δρmin (e Å−3) 1.49, −0.91
Computer programs: APEX2 and SAINT (Bruker, 2009[Bruker (2009). APEX2, SADABS and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.]), SHELXS97, SHELXL97 and SHELXTL (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]), DIAMOND (Brandenburg, 2006[Brandenburg, K. (2006). DIAMOND. Crystal Impact GbR, Bonn, Germany.]) and Mercury (Macrae et al., 2008[Macrae, C. F., Bruno, I. J., Chisholm, J. A., Edgington, P. R., McCabe, P., Pidcock, E., Rodriguez-Monge, L., Taylor, R., van de Streek, J. & Wood, P. A. (2008). J. Appl. Cryst. 41, 466-470.]).

Supporting information


Chemical context top

In a previous paper (Reichelt & Reuter, 2014), we described the formation and structure of the first diorganotin(IV) oxalate (Ox.), (R2Sn)Ox in the case of R = t-butyl in the course of a systematical study on the reaction of diorganotin(IV) oxides with nitric acid (Reuter & Reichelt, 2014a,b). Applying similar reaction conditions to di-n-propyl­tin oxide resulted in the formation of the title compound as an unexpected side product. This diorganotin(IV) oxalate hydrate gives new insights into the structural chemistry of organotin(IV) oxalates.

Database survey top

Up to now, organotin(IV) oxalates were limited to a few representatives of triorganotin(IV) oxalates with general formula (R3Sn)2Ox, viz. R = phenyl (Diop et al., 2003); R = cyclo­hexyl (Ng et al., 1994) and a Lewis-base stabilized one with general formula [R3Sn(LB)]2Ox, viz. R = methyl, LB = H2O (Diop et al., 1997).

Structural commentary top

The asymmetric unit of the title compound comprises one half of the formula unit (Fig. 1), consisting of an SnIV atom lying on a twofold rotation axis, a water molecule with the O atom on the same rotation axis as the Sn atom, a bilateral chelating centrosymmetric oxalate anion and an n-propyl group attached to the Sn atom in general positions. Different from in the unsubstituted t-butyl oxalate (Reichelt & Reuter, 2014), the SnIV atom is sevenfold coordinated by two n-propyl groups, four oxygen atoms of two symmetry-related oxalate anions and one water molecule.

As a result of of symmetry, both Sn—C bond lengths are of equal length. At 2.127 (3) Å, they are considerably shorter than the Sn—C bond lengths of 2.186 (2) and 2.190 (2) Å in the di-t-butyl tin oxalate although the higher coordination number of the Sn atom in the hydrate compared with the Sn atom in the pure oxalate should result in longer bonds. This reflects the influence of the organic part (n-propyl versus t-butyl) on Sn—C bond length, as already mentioned by Britton (2006). The n-propyl group itself is well ordered as can be deduced from the aniostropic displacement parameters as well as from the C—C bond lengths of 1.521 (3) and 1.522 (4) Å, which are in good agreement with the values reported by Allen et al. (1987) for sp3-hybridized carbon atoms [1.513 (14) for –CH2—CH3, 1.524 (14) Å for –CH2—CH2–]. The corresponding bond angles are 117.0 (2) at C11 and 112.1 (2)° at C12. All in all, this group adopts a nearly staggered conformation with an Sn1—C11—C12—C13 torsion angle of -174.3 (2)°. Although both n-propyl groups attached to the Sn atom are related to each other by the twofold rotation axis, the bond angle is not exactly 180° because the Sn—C bond is not exactly perpendicular to this axis.

The two symmetry-related oxalate anions coordinate side-on to the Sn atom with only slightly different Sn—O bond lengths [Sn1—O2 = 2.290 (2) Å and Sn1—O1 = 2.365 (2) Å]. This symmetrical coordination mode is in sharp contrast to the asymmetrical coordination mode of the oxalate anions in the anhydrous t-butyl compound [2.150 (1) to 2.4245 (1) Å] and is also reflected in C—O bond lengths which are much more closer to each other [C—O = 1.248 (3)/1.254 (3) Å, Δ = 0.006 Å] than in the t-butyl compound [1.242 (1)/1.269 (1) Å, Δ = 0.027 Å ] as an expression of more delocalized CO bonds. The oxalate ion itself is planar as it belongs to point group Ci and exhibits a C—C bond length of 1.549 (4) Å, [1.545 (3) Å], which is slightly longer than a normal bond between two sp2-hybridized C atoms. From the bilateral, side-on coordination mode of the oxalate anion to the organotin moieties, a one-dimensional coordination polymer parallel to [001] results (Fig. 2).

It is remarkable that the sevenfold coordination of the Sn atom corresponds to a penta­gonal bipyramid (Fig. 3). The axis formed by the two n-propyl groups is only slightly bent [176.8 (1)°] at the Sn atom. Only one [O1—Sn1—O1i = 76.12 (8)°] of the five [O3—Sn1—O2ii/O2iii = 71.60 (4)°; O1/O1i—Sn1—O2iii = 70.48 (6)°; for symmetry codes see the Supporting information] bond angles between the O atoms of the equatorial plane deviates significantly from the ideal value of 72°. These structural features are caused (i) by the distance of the chelating oxalate anion to the Sn atom, (ii) by the symmetrical position of the water molecule exactly between the two oxalate anions, and (iii) by a tilt of the plane of the oxalate anions relative to the least-squares plane through the atoms of the equatorial plane.

Supra­molecular features top

In the solid state, this coordination polymer is stabilized by hydrogen bonds (Table 1) between the water molecule of one chain as donor and the oxygen atom of the oxalate ion of neighboring chains as acceptor, and vice versa. As the plane of the water molecule coincides with the propagation plane of the coordination polymer, an almost planar, two-dimensional linkage of the chains results (Fig. 4). These planes are staggered one above the other with the n-propyl groups of one plane ranging [projecting?] into the shell of n-propyl groups of the neighboring plane (Fig. 5).

Synthesis and crystallization top

Single crystals of the title compound were obtained as side products during the reaction of di-n-propyl­tin(IV) oxide with a large excess of concentrated nitric acid in ethanol. In a typical experiment, a mixture of 0.32 g (1.45 mmol) nPr2SnO and 1.5 ml (21 mmol) HNO3 (Merck, 65%wt) in 5 ml ethanol was stirred at room temperature for several hours until a clear solution was obtained. Slow evaporation of solvents during some weeks resulted in the formation of colorless, block-shaped crystals of the title compound as well as crystals of an up-to-now unidentified reaction product. A suitable single crystal was selected under a polarization microscope and mounted on a 50 µm MicroMesh MiTeGen MicromountTM using FROMBLIN Y perfluoro­polyether (LVAC 16/6, Aldrich).

Refinement top

All hydrogen atoms could be localized in difference Fourier syntheses. Those of the n-propyl group were idealized and refined at calculated positions riding on the carbon atoms with C—H distances of 0.99 Å (–CH2–) and 0.98 Å (–CH3). Those of the water molecule were refined with respect to a common O—H distance of 0.96 Å and an H—O—H bond angle of 104.5° before they were fixed and allowed to ride on the corresponding oxygen atom. For the hydrogen atoms of the n-propyl group, a common isotropic displacement parameter was refined as well as one common isotropic displacement parameter for the hydrogen atoms of the water molecule.

Related literature top

For related literature, see: Allen et al. (1987); Britton (2006); Diop et al. (1997, 2003); Ng et al. (1994); Reichelt & Reuter (2014); Reuter & Reichelt (2014a, 2014b).

Computing details top

Data collection: SMART (Bruker, 2009); cell refinement: SAINT (Bruker, 2009); data reduction: SAINT (Bruker, 2009); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: DIAMOND (Brandenburg, 2006) and Mercury (Macrae et al., 2008); software used to prepare material for publication: SHELXTL (Sheldrick, 2008).

Figures top
[Figure 1] Fig. 1. Ball-and-stick model of one formula unit in the crystal structure of the title compound with the atomic numbering scheme used. With exception of the H atoms, which are shown as spheres of arbitrary radius, all other atoms are drawn as displacement ellipsoids at the 50% probability level. [Symmetry codes: (1) 1-x, y, 1/2-z; (2) 1-x, -y, 1-z.]
[Figure 2] Fig. 2. Stick-model showing a part of the one-dimensional coordination polymer. Colour code: Sn = bronze, O = red, C = dark grey, H = light-grey.
[Figure 3] Fig. 3. Schematic representation of the pentagonal-bipyramidal coordination polyhedron around the Sn atom.
[Figure 4] Fig. 4. Part of the hydrogen bonding (red dashed lines) system between adjacent chains of the one-dimensional coordination polymer. [Symmetry codes: (1) 1-x, y, 1/2-z; (2) x, 1+y, z; (3) 1-x, 1+y, 1/2-z.]
[Figure 5] Fig. 5. Perspective view of the crystal structure parallel to [010], looking down the chains of the one-dimensional coordination polymer.
catena-Poly[[aquadi-n-propyltin(IV)]-µ-oxalato] top
Crystal data top
[Sn(C3H7)2(C2O4)(H2O)]F(000) = 616
Mr = 310.90Dx = 1.867 Mg m3
Monoclinic, C2/cMo Kα radiation, λ = 0.71073 Å
Hall symbol: -C 2ycCell parameters from 9966 reflections
a = 16.6490 (8) Åθ = 2.7–28.7°
b = 6.4457 (3) ŵ = 2.31 mm1
c = 11.5438 (6) ÅT = 100 K
β = 116.772 (2)°Plate, colourless
V = 1106.02 (9) Å30.20 × 0.15 × 0.10 mm
Z = 4
Data collection top
Bruker APEXII CCD
diffractometer
1327 independent reflections
Radiation source: fine-focus sealed tube1255 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.062
ϕ and ω scansθmax = 28.0°, θmin = 2.7°
Absorption correction: multi-scan
(SADABS; Bruker, 2009)
h = 2021
Tmin = 0.657, Tmax = 0.811k = 88
19736 measured reflectionsl = 1513
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.024Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.058H-atom parameters constrained
S = 1.11 w = 1/[σ2(Fo2) + (0.0357P)2 + 0.058P]
where P = (Fo2 + 2Fc2)/3
1327 reflections(Δ/σ)max < 0.001
68 parametersΔρmax = 1.49 e Å3
0 restraintsΔρmin = 0.91 e Å3
Crystal data top
[Sn(C3H7)2(C2O4)(H2O)]V = 1106.02 (9) Å3
Mr = 310.90Z = 4
Monoclinic, C2/cMo Kα radiation
a = 16.6490 (8) ŵ = 2.31 mm1
b = 6.4457 (3) ÅT = 100 K
c = 11.5438 (6) Å0.20 × 0.15 × 0.10 mm
β = 116.772 (2)°
Data collection top
Bruker APEXII CCD
diffractometer
1327 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2009)
1255 reflections with I > 2σ(I)
Tmin = 0.657, Tmax = 0.811Rint = 0.062
19736 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0240 restraints
wR(F2) = 0.058H-atom parameters constrained
S = 1.11Δρmax = 1.49 e Å3
1327 reflectionsΔρmin = 0.91 e Å3
68 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Sn10.50000.13504 (3)0.25000.01108 (10)
C110.35701 (18)0.1258 (3)0.1538 (3)0.0165 (5)
H1110.33430.25890.17030.028 (3)*
H1120.33760.11740.05930.028 (3)*
C120.31172 (17)0.0495 (4)0.1905 (3)0.0210 (5)
H1210.32450.03360.28250.028 (3)*
H1220.33740.18360.18160.028 (3)*
C130.21034 (18)0.0522 (5)0.1060 (3)0.0304 (7)
H1310.18450.07900.11630.028 (3)*
H1320.18390.16750.13250.028 (3)*
H1330.19740.06980.01500.028 (3)*
O10.50631 (12)0.1538 (2)0.38012 (17)0.0131 (4)
C10.50270 (17)0.1155 (3)0.4836 (2)0.0117 (5)
O20.50337 (11)0.2472 (3)0.56400 (15)0.0141 (4)
O30.50000.4860 (4)0.25000.0203 (6)
H30.50170.57670.31700.033 (8)*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Sn10.01603 (15)0.01051 (14)0.00986 (14)0.0000.00864 (10)0.000
C110.0170 (12)0.0195 (14)0.0133 (12)0.0013 (9)0.0071 (10)0.0020 (9)
C120.0209 (13)0.0223 (14)0.0207 (13)0.0020 (11)0.0101 (11)0.0024 (11)
C130.0226 (14)0.0369 (17)0.0298 (16)0.0058 (13)0.0101 (12)0.0091 (13)
O10.0198 (9)0.0118 (8)0.0100 (9)0.0014 (6)0.0088 (7)0.0005 (5)
C10.0104 (11)0.0139 (12)0.0106 (11)0.0001 (9)0.0046 (9)0.0002 (9)
O20.0222 (9)0.0126 (9)0.0121 (8)0.0015 (7)0.0119 (7)0.0013 (6)
O30.0420 (16)0.0096 (12)0.0156 (12)0.0000.0185 (12)0.000
Geometric parameters (Å, º) top
Sn1—C112.127 (3)C12—H1210.9900
Sn1—C11i2.127 (3)C12—H1220.9900
Sn1—O32.262 (2)C13—H1310.9800
Sn1—O2ii2.290 (2)C13—H1320.9800
Sn1—O2iii2.290 (2)C13—H1330.9800
Sn1—O12.365 (2)O1—C11.248 (3)
Sn1—O1i2.365 (2)C1—O21.254 (3)
C11—C121.521 (3)C1—C1ii1.549 (4)
C11—H1110.9900O2—Sn1ii2.290 (2)
C11—H1120.9900O3—H30.9600
C12—C131.522 (4)
C11—Sn1—C11i176.8 (1)Sn1—C11—H111108.0
C11—Sn1—O391.60 (6)C12—C11—H112108.0
C11i—Sn1—O391.60 (6)Sn1—C11—H112108.0
C11—Sn1—O2ii90.23 (8)H111—C11—H112107.3
C11i—Sn1—O2ii90.78 (8)C11—C12—C13112.1 (2)
O3—Sn1—O2ii71.60 (4)C11—C12—H121109.2
C11—Sn1—O2iii90.78 (8)C13—C12—H121109.2
C11i—Sn1—O2iii90.23 (8)C11—C12—H122109.2
O3—Sn1—O2iii71.60 (4)C13—C12—H122109.2
O2ii—Sn1—O2iii143.20 (8)H121—C12—H122107.9
C11—Sn1—O191.65 (8)C12—C13—H131109.5
C11i—Sn1—O185.83 (8)C12—C13—H132109.5
O3—Sn1—O1141.94 (4)H131—C13—H132109.5
O2ii—Sn1—O170.48 (6)C12—C13—H133109.5
O2iii—Sn1—O1146.23 (6)H131—C13—H133109.5
C11—Sn1—O1i85.83 (8)H132—C13—H133109.5
C11i—Sn1—O1i91.65 (8)C1—O1—Sn1116.4 (1)
O3—Sn1—O1i141.94 (4)O1—C1—O2125.9 (2)
O2ii—Sn1—O1i146.23 (6)O1—C1—C1ii117.2 (3)
O2iii—Sn1—O1i70.48 (6)O2—C1—C1ii116.9 (3)
O1—Sn1—O1i76.12 (8)C1—O2—Sn1ii119.0 (2)
C12—C11—Sn1117.0 (2)Sn1—O3—H3127.5
C12—C11—H111108.0
Sn1—C11—C12—C13174.3 (2)
Symmetry codes: (i) x+1, y, z+1/2; (ii) x+1, y, z+1; (iii) x, y, z1/2.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O3—H3···O1iv0.961.872.741 (3)149
Symmetry code: (iv) x, y+1, z.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O3—H3···O1i0.961.872.741 (3)149.3
Symmetry code: (i) x, y+1, z.

Experimental details

Crystal data
Chemical formula[Sn(C3H7)2(C2O4)(H2O)]
Mr310.90
Crystal system, space groupMonoclinic, C2/c
Temperature (K)100
a, b, c (Å)16.6490 (8), 6.4457 (3), 11.5438 (6)
β (°) 116.772 (2)
V3)1106.02 (9)
Z4
Radiation typeMo Kα
µ (mm1)2.31
Crystal size (mm)0.20 × 0.15 × 0.10
Data collection
DiffractometerBruker APEXII CCD
diffractometer
Absorption correctionMulti-scan
(SADABS; Bruker, 2009)
Tmin, Tmax0.657, 0.811
No. of measured, independent and
observed [I > 2σ(I)] reflections
19736, 1327, 1255
Rint0.062
(sin θ/λ)max1)0.660
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.024, 0.058, 1.11
No. of reflections1327
No. of parameters68
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)1.49, 0.91

Computer programs: SMART (Bruker, 2009), SAINT (Bruker, 2009), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008), DIAMOND (Brandenburg, 2006) and Mercury (Macrae et al., 2008), SHELXTL (Sheldrick, 2008).

 

Acknowledgements

We thank the Deutsche Forschungsgemeinschaft and the Government of Lower Saxony for funding the diffractometer.

References

First citationAllen, F. H., Kennard, O., Watson, D. G., Brammer, L., Orpen, A. G. & Taylor, R. (1987). J. Chem. Soc. Perkin Trans. 2, pp. S1–19.  CrossRef Web of Science Google Scholar
First citationBrandenburg, K. (2006). DIAMOND. Crystal Impact GbR, Bonn, Germany.  Google Scholar
First citationBritton, D. (2006). Acta Cryst. C62, m93–m94.  Web of Science CSD CrossRef CAS IUCr Journals Google Scholar
First citationBruker (2009). APEX2, SADABS and SAINT. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationDiop, L., Mahieu, B., Mahon, M. F., Molloy, K. C. & Okio, K. Y. A. (2003). Appl. Organomet. Chem. 17, 881–882.  Web of Science CSD CrossRef CAS Google Scholar
First citationDiop, L., Mahon, M. F., Molloy, K. C. & Sidibe, M. (1997). Main Group Met. Chem. 20, 649–654.  CrossRef CAS Google Scholar
First citationMacrae, C. F., Bruno, I. J., Chisholm, J. A., Edgington, P. R., McCabe, P., Pidcock, E., Rodriguez-Monge, L., Taylor, R., van de Streek, J. & Wood, P. A. (2008). J. Appl. Cryst. 41, 466–470.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationNg, S. W., Kumar Das, V. G., Li, S.-L. & Mak, T. C. W. (1994). J. Organomet. Chem. 467, 47–49.  CSD CrossRef CAS Web of Science Google Scholar
First citationReichelt, M. & Reuter, H. (2014). Acta Cryst. E70, m133.  CSD CrossRef IUCr Journals Google Scholar
First citationReuter, H. & Reichelt, M. (2014a). Can. J. Chem. 92, 471–483.  Web of Science CSD CrossRef CAS Google Scholar
First citationReuter, H. & Reichelt, M. (2014b). Can. J. Chem. 92, 484–495.  Web of Science CSD CrossRef CAS Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds