Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
In the title compound, C10H7NO3·H2O, the zwitterionic organic molecules and the water mol­ecules are connected by N-H...O and O-H...O hydrogen bonds to form ribbons, and [pi]-[pi] stacking inter­actions expand these ribbons into a three-dimensional net. The energies of these hydrogen bonds adopt values typical for mildly weak inter­actions (3.33-7.75 kcal mol-1; 1 kcal mol-1 = 4.184 kJ mol-1). The total [pi]-[pi] stacking inter­actions between aromatic mol­ecules can be classified as mildly strong (energies of 15.3 and 33.9 kcal mol-1), and they are made up of multiple constituent [pi]-[pi] inter­actions between six-membered rings. The short inter­molecular C-H...O contact between two zwitterionic mol­ecules is nonbonding in character.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S0108270111021585/uk3030sup1.cif
Contains datablocks global, I

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S0108270111021585/uk3030Isup2.hkl
Contains datablock I

cml

Chemical Markup Language (CML) file https://doi.org/10.1107/S0108270111021585/uk3030Isup3.cml
Supplementary material

CCDC reference: 838153

Comment top

The phenomenon of intermolecular interactions is essential in almost all chemical and biochemical processes (including catalysis and molecular assembly), and thus it is crucial in chemical and crystal engineering, as well as in supramolecular chemistry (Jeffrey & Saenger, 1991; Jeffrey, 1997; Epstein & Shubina, 2002). From the beginning of the twentieth century, the various types of intermolecular interactions (hydrogen and halogen bonds, ππ, anion–π and cation–π interactions etc.) were found and widely studied (Payer et al., 2007; Schnabel et al., 2007), including their spectroscopic (Tonge et al., 2007; Fecko et al., 2003), structural (Suresh, 2007; Fisher et al., 2007) and thermodynamic (Harmon & Nikolla, 2003; Villar et al., 2003) features. Careful inspection of the literature shows that the energetic behaviour of different intermolecular interactions has not been as commonly studied as other properties, although the number of reports on this topic has recently grown extensively. The energetic characteristics of such interactions are essential because they govern the stability of the assemblies formed (both supramolecular complexes and in-reaction intermediates), and in consequence they govern the possible applications of specific intermolecular interactions in chemical and biochemical processes (Gavezzotti, 2008; Oliveira et al., 2006).

The title compound, (I), and its simple derivatives have diverse applications in pharmacy, medicine, agriculture and environmental protection. They possess potent antiviral activity against DNA herpes viruses, including cytomegalovirus, Varicella zoster virus, the Epstein–Barr virus, Herpes simplex virus and human herpes virus type 8 (Vaillancourt et al., 1998). Additionally, they are effective in preventing RNA retroviruses (mainly human immunodeficiency viruses) from replicating (Haugwitz et al., 1996) and they are efficient antitubercular agents (Urbanski, 1953). Because of its multidentate coordination ability, (I) and its chemical modifications are used as metal chelants for metals contaminating the environment. The simple and complex salts of (I) are also used as plant nutrients (Baret et al., 1995). It must be noted that the mechanism of biological activity of (I) is still unresolved, and thus the study of its intermolecular bonding properties may be crucial for both determining the action mechanism and designing drugs of greater efficiency.

Reports of the structures of coordination compounds of (I) and its derivatives possessing a substituted N or O atom are extremely limited and only three compounds are known to date, namely dichloro-oxo-triphenylphosphine(8-oxyquinoline-7-carboxylic acid)rhenium(V) triphenylphosphine oxide (Machura et al., 2008), dibromo-oxo-triphenylphosphine(8-oxyquinoline-7-carboxylic acid)rhenium(V) (Machura et al., 2008) and hexakis(µ2-7-ethoxycarbonyl-8-oxyquinolinato)trilithium-dinickel(II) hydrogen sulfate diethyl ether solvate (Albrecht et al., 2007).

The asymmetric unit of (I) contains one 8-hydroxyquinolinio-7-carboxylate zwitterion and one water molecule (Fig. 1). The zwitterionic form, which is typical for amino acids, has also been observed for only one structurally characterized isomer of (I), 8-hydroxyquinolinium-2-carboxylate, (II) (Okabe & Muranishi, 2002b). It must be mentioned that, in contrast with (I), (II) is solvent-free. For (II), structurally characterized coordination compounds are also almost unknown, and only seven such compounds have been studied to date, namely: diaqua(8-oxyquinoline-2-carboxylato-N,O,O')copper(II) (Nakamura et al., 2005), dichloro-oxo-(triphenylarsine)(8-hydroxyquinoline-2-carboxylic acid)rhenium(V) acetonitrile solvate (Machura & Kusz, 2008), dichloro-oxo-(triphenylphosphine)(8-hydroxyquinoline-2-carboxylic acid)rhenium(V) acetonitrile solvate (Machura & Kusz, 2008), bis(8-hydroxyquinoline-2-carboxylato-κ3O2,N,O8)-cobalt(II) trihydrate (Okabe & Muranishi, 2002a), bis(8-hydroxyquinoline-2-carboxylato-κ3O2,N,O8)-nickel(II) trihydrate (Okabe & Muranishi, 2002b), bis(8-hydroxyquinoline-2-carboxylato-κ3O2,N,O8)-cadmium(II) trihydrate (McDonald et al., 2008) and bis(8-hydroxyquinoline-2-carboxylato-κ3O2,N,O8)-zinc(II) trihydrate (McDonald et al., 2008). The above-mentioned zinc, cadmium, nickel and cobalt coordination compounds containing the 8-hydroxyquinoline-2-carboxylate moiety are isomorphous in the solid state.

The cyclic molecule of (I) is slightly distorted from planarity, with a maximum deviation from the weighted least-squares plane calculated for its all non-H atoms of 0.0281 (8) Å for atom O1. The corresponding maximum deviation in (II) also occurs for a carboxylate O atom, but it is distinctly larger (0.164 Å; Okabe & Muranishi, 2002b). The water molecule of (I) lies in the above-mentioned plane of the organic molecule [deviation 0.0043 (14) Å]. The ten-membered ring systems have very similar bond lengths, which suggests almost-perfect π-electron delocalization within them. These bond lengths in (I) differ by less than 0.03 Å from the analogous ones of (II) and by less than 0.02 Å compared with values found for 8-hydroxyquinoline (Banerjee & Saha, 1986; Zhang & Wu, 2005). This proves that the delocalization is so strong that even protonation or deprotonation of the quinoline N atom does not affect the aromatic system. This postulate is confirmed by the analysis of the UV spectra of (I) in neutral, acidic and basic environments. In each case, the band associated with the π(aromatic) π*(aromatic) transition is unchanged, even in the N-deprotonated form of (I) (for details, see the Experimental section).

The molecules of (I) are held together by intermolecular N—H···O and O—H···O hydrogen bonds (Fig. 2, Table 1) and ππ stacking interactions (Fig. 3, Table 2). These hydrogen bonds, together with an intramolecular O—H···O interaction (Table 1), create a DDDS(6) unitary graph set (Bernstein et al., 1995). At the second-level graph, N2, the hydrogen bonds can be expressed as R44(6)D[R44(18)D][C22(9)D] basic graph sets. In this way, a ribbon parallel to the crystallographic [001] axis is created. Neighbouring layers are interlinked by ππ stacking interactions to form a three-dimensional net. There are also short intermolecular C—H···O contacts (Table 1) present in the crystal structure, and on the basis of geometric considerations these can can be classified as weak hydrogen bonds (Desiraju & Steiner 1999). However, the geometric parameters are misleading in this case, and this contact has a non-bonding nature. The hydrogen-bonding scheme in (II) is distinctly different (all motifs are infinite on the N1 level), mainly due to the absence of any solvent molecule and, in consequence, the absence of one hydrogen-bond acceptor and two hydrogen-bond donors. Some of the ring-centroid distances (Table 2) between stacked rings are longer than normal (Hunter & Sanders, 1990) but such elongation does not change their bonding character.

The hydrogen-bond energies in (I) lie in the ranges observed for similar nonionic systems such as aminonitromethylbenzenes (Kruszynski & Sieranski, 2011), and they are lower than the energies of analogous hydrogen bonds formed in ionic species containing both organic and inorganic ions, e.g. 2,4-dinitrophenylhydrazine hydrochloride hydrate (Kruszynski, 2008), o-tolidinium dichloride dihydrate (Kruszynski, 2009), 2,3-dihydro-1,3-benzothiazol-2-iminium monohydrogen sulfate and 2-iminio-2,3-dihydro-1,3-benzothiazole-6-sulfonate (Kruszynski & Trzesowska-Kruszynska, 2009), 2-amino-5-chloro-1,3-benzoxazol-3-ium inorganic salts (Kruszynski & Trzesowska-Kruszynska, 2010), and 2,3-dihydro-1,3-benzothiazol-2-iminium hydrogen oxydiacetate (Trzesowska-Kruszynska & Kruszynski, 2009). This difference suggests that a significant increase in hydrogen-bond energies originates mainly from the overall molecular charge, not from local charges situated on particular atoms. It was previously found (for ionic species, e.g. nicotinohydrazide dihydrochloride; Kruszynski, 2011) that stronger hydrogen bonds are created by anions acting as hydrogen-bond acceptors, and the strength of the interactions does not depend much on a charge located on hydrogen-bond donors, i.e. neutral and cationic donors create bonds of similar strength (for the same acceptor and similar interaction geometry), while anionic acceptors create distinctly stronger interactions than neutral acceptors interacting with the same donors and possessing similar hydrogen-bond geometry (Kruszynski, 2008, 2011). An analogous situation is observed for the neutral molecule of (I), possessing local charges (Breneman & Wiberg, 1990) situated on the N1—H1N group [0.97 (1) A.U.] and on atoms O1 and O2 [-0.75 (4) A.U.]. In general, all bonds can be classified as mildly weak, but the shorter N(+)—H···O intermolecular hydrogen bonds are less than half the strength of the longer O—H···O(-) hydrogen bonds (Table 1). Thus, it can again be stated that for the creation of stronger hydrogen bonds, the additional electron density on a hydrogen-bond acceptor is more important than the electron-density deficiency on a hydrogen-bond donor, although for neutral molecules these energy differences are not large. It must be noted that the geometrically allowed (Desiraju & Steiner, 1999) C1—H1···O2i hydrogen bond (symmetry code given in Table 1) is actually a non-bonding interaction. The total strength of the intramolecular O3—H3O···O1 interaction (estimated as described in the Experimental section) is 2.47 kcal mol-1 (1 kcal mol-1 = 4.184 kJ mol-1). Calculation of the intermolecular interaction energies of parallel aromatic 12-membered ring systems related by the symmetry transformations (-x + 1, -y + 2, -z + 1) and (-x, -y + 2, -z + 1) show that these interactions are bonding in character with energies of 15.3 (7) and 33.9 (9) kcal mol-1, respectively. The differences between calculations excluding and including the dispersion energy, Edisp, are no more than 1.1 kcal mol-1 (EDFT < EMP2), which proves that this energy is involved in these interactions although its contribution is small (Edisp < 5% E). The total intermolecular interaction (with the above-mentioned energy) is made up of multiple ππ stacking interactions between neighbouring six-membered rings (four pairs of six-membered rings in the first case and three pairs in the second; Table 2).

The non-covalent nature of the intermolecular interactions in (I) was analysed using the natural bond orbital (NBO) method (Foster & Weinhold, 1980; Reed & Weinhold, 1985; Reed et al., 1988). In this method, the strength of the donor–acceptor charge-transfer delocalization is characterized by the second-order stabilization energy, Edel. For hydrogen bonds, the principal charge-transfer interactions Edel(1) (Table 1) occur between the lone electron pairs of the O atoms and the antibonding orbitals of the N—H and O—H bonds. In the lateral charge-transfer interactions, the lone electron pairs of the O atoms donate their electron density to the one-centre Rydberg orbitals of the H atoms. The stacking interactions are formed by the bonding π orbitals of one ring donating electron density primarily to the antibonding π orbitals of the second ring [Edel(1) in Table 2] and secondarily to the one-centre Rydberg antibonding orbitals of the π-bonded atoms of the rings. The first-mentioned orbital interactions contribute about 70–80% of the total energy of the ππ interactions. This dependence is also observed for the intermolecular interaction energy of parallel aromatic ring systems related by the symmetry transformations (-x + 1, -y + 2, -z + 1) and (-x, -y + 2, -z + 1), in which the primary NBO interactions characterized by Edel(1) are responsible for 68% (10.4 kcal mol-1 out of a total of 15.3 kcal mol-1) and 82% (27.8 of 33.9 kcal mol-1) of the total intermolecular interactions, respectively. The observed energies of the stacking interactions between six-membered rings lie in the ranges for both real and idealized systems [e.g. similar ππ stacking interactions were estimated to be 0.59 kcal mol-1 for 2,3-dimethyl-6-nitroaniline (Kruszynski & Sieranski, 2011], 1.32 kcal mol-1 for the solid-state benzene dimer (Rubes & Bludsky, 2008) and 8.7 kcal mol-1 for the histidine-substituted uracil dimer (Cysewski, 2008)]. It is noteworthy that a geometric arrangement of the benzene and pyridine moieties in which the distances between the ring centroids are close to 5 Å still leads to bonding ππ interactions (Table 2). The systematic study of aminonitromethylbenzenes shows that such a long distance leads typically to a non-bonding interaction (Kruszynski & Sieranski, 2011). Thus, it can be postulated that a synergistic effect with other ππ interactions between fused rings is required to form such a long bonding interaction.

Related literature top

For related literature, see: Albrecht et al. (2007); Banerjee & Saha (1986); Baret et al. (1995); Becke (1993); Bernstein et al. (1995); Boys & Bernardi (1970); Breneman & Wiberg (1990); Cysewski (2008); Desiraju & Steiner (1999); Epstein & Shubina (2002); Fecko et al. (2003); Fisher et al. (2007); Foster & Weinhold (1980); Frisch (2004); Gavezzotti (2008); Harmon & Nikolla (2003); Haugwitz et al. (1996); Head-Gordon, Pople & Frisch (1988); Hunter & Sanders (1990); Jeffrey (1997); Jeffrey & Saenger (1991); Kruszynski (2008, 2009, 2011); Kruszynski & Sieranski (2011); Kruszynski & Trzesowska-Kruszynska (2009, 2010); Lee et al. (1988); Møller & Plesset (1934); Machura & Kusz (2008); Machura, Milek, Kusz, Nycz & Tabak (2008); McDonald et al. (2008); Meek & Fuchsman (1969); Nakamura et al. (2005); Okabe & Muranishi (2002a, 2002b); Oliveira et al. (2006); Payer et al. (2007); Reed & Weinhold (1985); Reed et al. (1988); Rubes & Bludsky (2008); Schnabel et al. (2007); Suresh (2007); Tonge et al. (2007); Trzesowska-Kruszynska & Kruszynski (2009); Urbanski (1953); Vaillancourt et al. (1998); Villar et al. (2003); Zhang & Wu (2005).

Experimental top

Compound (I) was synthesized according to the modified procedure of Meek & Fuchsman (1969). Equimolar amounts (0.1 mol) of 8-hydroxyquinoline and NaOH (analytical grade, POCh Gliwice) were placed in a two-necked round-bottomed flask and toluene (50 ml) was added. The flask was mounted in a Dean–Stark apparatus for solvents with a density less than water and the solution was heated at boiling for 3 h. Next, the solution was cooled to 353 K, the flask was removed from the Dean–Stark apparatus and N,N-dimethylformamide (50 ml) was added to the solution. A bubbler was mounted in the side neck of the flask and a still head with a condenser was fitted to the main neck. The solution was heated to 418 K (at about 383 K the toluene starts to distil) and at this temperature CO2 was passed through the solution via the bubbler. Next, the solution was heated to 433 K and kept at this temperature for 3 h with CO2 continuously flowing through it. After this period of time, the solution was cooled and poured into water (150 ml). The solid residue was filtered off and the solution was acidified to pH 4.0 with concentrated HCl. The precipitate which formed, containing (I) and small amounts of 7-carboxy-8-hydroxyquinoline hydrochloride, was filtered off and dissolved in a 0.01 M water–methanol (1:1 v/v; 100 ml) solution of NaOH. Good quality yellow crystals grew from this solution after 6 h.

UV–Vis data [wavelength (nm), molar extinction coefficient (m2 mol-1), transition character; - indicates the parameter is not applicable] for (I) in aqueous solution: 210 s, 4212.7, π(COO) π*(COO); 218 w, 1767.2, π(COO) π*(COO); 257 s, 4747.9, p(aromatic) π*(aromatic); 315 w, 300.9, n π*(COO); 333 w, 265.1, n π*(aromatic). In the solid state: 232 s, –, p(aromatic) π*(aromatic); 278 w, –, n π*(COO); 331 w, –, n π*(aromatic), 360 s, –, intramolecular p(aromatic) π*(aromatic); 404 w, –, intramolecular p(aromatic) Ry*(aromatic). In 6 M hydrochloric acid–water solution: 205 s, 20549.4, π(COO) π*(COO); 217 w, 1198.0, π(COO) π*(COO); 265 s, 4520.3, p(aromatic) π*(aromatic); 309 s, 193.4, n π*(COO); 356 s, 216.6, n π*(aromatic). In 10 M ammonium hydroxide–water solution: 197 w, 869.4, π(COO) π*(COO); 206 w, 1141.9, π(COO) π*(COO); 216 w, 1269.0, π(COO) π*(COO); 255 s, 3493.7, p(aromatic) π*(aromatic); 311 s, 261.4, n π*(COO); 329 s, 302.1, n π*(aromatic).

The molecular electronic properties were calculated at a single point for both the diffraction-derived coordinates and the optimized structure, and these are comparable within four standard deviations, although the geometrically optimized molecules show a typical elongation of the O—H, N—H and C—H bonds (from 0.06 to 0.19 Å). The total binding energies of the intermolecular interactions were calculated for molecular sets containing from one to 16 molecules using the total self-consistent field energy. The molecules within each molecular set were arranged in hydrogen-bonded ribbons (an example of such a ribbon for the ten-molecule set is depicted in Fig. 2) and in piles formed by ππ interactions. The structural parameters (with H-atom positions geometrically optimized) were the starting model in each calculation. Basis set superposition error (BSSE) corrections were carried out using the counterpoise (CP) method (Boys & Bernardi,1970). The B3LYP functional (Becke, 1993; Lee et al., 1988) and Hartree–Fock calculation, followed by a Møller–Plesset correlation energy correction (Møller & Plesset, 1934) truncated at the second order (Head-Gordon et al., 1988) in the triple-ζ 6-311++G(3df,2p) basis set was used, as implemented in GAUSSIAN03 (Frisch et al., 2004). In all cases, the differences in electronic properties and energies originating from the different number of molecules used in the calculation, and the differences between the above-described methods, are given in parentheses as standard deviations of the mean values. Where a deviation is not given, the values were the same within their range of reported precision. The total strength of the intramolecular O3—H3O···O1 hydrogen bond cannot be calculated by total self-consistent field energy due to the impossibility of dividing the molecule into two closed-shell systems. Thus, it was estimated by summation over all elements of second-order perturbation theory analysis of the Fock matrix [on the NBO basis (Foster & Weinhold, 1980; Reed & Weinhold, 1985; Reed et al., 1988)] associated with this interaction.

Refinement top

C-bound H atoms were placed in calculated positions (C—H = 0.93 Å) and other H atoms were found from the difference Fourier syntheses after eight cycles of anisotropic refinement (N—H and O—H distances as in Table 1). All H atoms were refined as riding on their parent atoms, with Uiso(H) = 1.2Ueq(C,N) or 1.5Ueq(O), in all refinement cycles (including the final one). The isotropic displacement parameters of O- and N-bound H atoms were then refined to check the correctness of their positions in the post-final calculation. After eight cycles, the refinement reached stable convergence with isotropic displacement parameters in the range 0.053–0.084 Å-2. The values of the isotropic displacement parameters of the H atoms have reasonable values (compared with their parent non-H atoms), which proves the correctness of the H-atom positions.

Computing details top

Data collection: CrysAlis CCD (Oxford Diffraction, 2006); cell refinement: CrysAlis RED (Oxford Diffraction, 2006); data reduction: CrysAlis RED (Oxford Diffraction, 2006); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: XP in SHELXTL/PC (Sheldrick, 2008) and ORTEP-3 for Windows (Version 1.062; Farrugia, 1997); software used to prepare material for publication: SHELXL97 (Sheldrick, 2008) and PLATON (Spek, 2003).

Figures top
[Figure 1] Fig. 1. A view of the asymmetric unit of (I), showing the atom-labelling scheme. Displacement ellipsoids are drawn at the 50% probability level. Hydrogen bonds are indicated by dashed lines.
[Figure 2] Fig. 2. Part of the molecular packing of (I), showing the hydrogen-bonded ribbon parallel to crystallographic [001] axis. Intermolecular hydrogen bonds are indicated by dashed lines. (Symmetry codes are as given in Table 1.)
8-hydroxyquinolinium-7-carboxylate monohydrate top
Crystal data top
C10H7NO3·H2OZ = 2
Mr = 207.18F(000) = 216
Triclinic, P1Dx = 1.503 Mg m3
Dm = 1.50 Mg m3
Dm measured by Berman density torsion balance
Hall symbol: -P 1Mo Kα radiation, λ = 0.71073 Å
a = 7.0045 (4) ÅCell parameters from 1804 reflections
b = 7.6512 (5) Åθ = 2–50°
c = 9.4192 (5) ŵ = 0.12 mm1
α = 87.877 (5)°T = 291 K
β = 71.718 (5)°Prism, colourless
γ = 73.083 (5)°0.02 × 0.01 × 0.01 mm
V = 457.76 (5) Å3
Data collection top
Kuma KM4 CCD area-detector
diffractometer
1608 independent reflections
Radiation source: fine-focus sealed tube1230 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.031
Detector resolution: 41.6666 pixels mm-1θmax = 25.1°, θmin = 2.3°
ω scansh = 86
Absorption correction: numerical
(X-RED; Stoe & Cie, 1999)
k = 99
Tmin = 0.997, Tmax = 1.000l = 1111
4445 measured reflections
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.032Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.092H-atom parameters constrained
S = 0.99 w = 1/[σ2(Fo2) + (0.0642P)2]
where P = (Fo2 + 2Fc2)/3
1608 reflections(Δ/σ)max < 0.001
136 parametersΔρmax = 0.15 e Å3
0 restraintsΔρmin = 0.25 e Å3
Crystal data top
C10H7NO3·H2Oγ = 73.083 (5)°
Mr = 207.18V = 457.76 (5) Å3
Triclinic, P1Z = 2
a = 7.0045 (4) ÅMo Kα radiation
b = 7.6512 (5) ŵ = 0.12 mm1
c = 9.4192 (5) ÅT = 291 K
α = 87.877 (5)°0.02 × 0.01 × 0.01 mm
β = 71.718 (5)°
Data collection top
Kuma KM4 CCD area-detector
diffractometer
1608 independent reflections
Absorption correction: numerical
(X-RED; Stoe & Cie, 1999)
1230 reflections with I > 2σ(I)
Tmin = 0.997, Tmax = 1.000Rint = 0.031
4445 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0320 restraints
wR(F2) = 0.092H-atom parameters constrained
S = 0.99Δρmax = 0.15 e Å3
1608 reflectionsΔρmin = 0.25 e Å3
136 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R-factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
N10.23982 (14)0.96591 (14)0.76152 (11)0.0293 (3)
H1N0.26350.85510.78760.035*
C10.20923 (19)1.08742 (18)0.86786 (14)0.0356 (3)
H10.21101.04920.96240.043*
C20.1745 (2)1.27139 (18)0.84095 (15)0.0386 (3)
H20.15331.35630.91670.046*
C30.17166 (18)1.32659 (17)0.70262 (14)0.0352 (3)
H30.14841.44990.68380.042*
C40.20363 (17)1.19858 (16)0.58749 (14)0.0290 (3)
C50.20544 (19)1.24551 (17)0.44109 (14)0.0333 (3)
H50.18401.36680.41590.040*
C60.23878 (18)1.11235 (17)0.33717 (14)0.0327 (3)
H60.23771.14510.24130.039*
C70.27496 (17)0.92672 (16)0.36911 (13)0.0281 (3)
C80.27794 (17)0.87523 (16)0.51110 (13)0.0259 (3)
C90.23913 (17)1.01405 (16)0.62078 (13)0.0263 (3)
C100.31383 (18)0.78307 (18)0.25166 (13)0.0319 (3)
O10.35190 (14)0.61837 (12)0.29013 (10)0.0396 (3)
O20.30856 (17)0.82954 (14)0.12604 (10)0.0509 (3)
O30.31724 (13)0.70246 (11)0.54955 (9)0.0340 (2)
H3O0.34400.64100.46570.051*
O990.30526 (14)0.64675 (12)0.88713 (10)0.0436 (3)
H1O0.30870.67750.97410.065*
H1P0.41270.56210.84160.065*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
N10.0331 (5)0.0265 (6)0.0288 (6)0.0083 (4)0.0108 (4)0.0021 (4)
C10.0404 (7)0.0375 (8)0.0290 (7)0.0113 (6)0.0106 (5)0.0025 (6)
C20.0415 (7)0.0354 (8)0.0377 (7)0.0109 (6)0.0099 (6)0.0086 (6)
C30.0343 (7)0.0236 (7)0.0452 (8)0.0066 (5)0.0107 (6)0.0021 (6)
C40.0248 (6)0.0261 (7)0.0354 (7)0.0066 (5)0.0093 (5)0.0010 (5)
C50.0368 (7)0.0228 (7)0.0411 (7)0.0081 (5)0.0149 (5)0.0081 (5)
C60.0362 (7)0.0318 (7)0.0317 (7)0.0086 (5)0.0147 (5)0.0075 (5)
C70.0259 (6)0.0291 (7)0.0300 (7)0.0076 (5)0.0101 (5)0.0016 (5)
C80.0245 (6)0.0228 (6)0.0303 (6)0.0062 (5)0.0094 (5)0.0024 (5)
C90.0238 (6)0.0272 (7)0.0276 (7)0.0071 (5)0.0084 (5)0.0013 (5)
C100.0332 (7)0.0330 (7)0.0304 (7)0.0097 (5)0.0115 (5)0.0015 (5)
O10.0540 (6)0.0277 (5)0.0366 (5)0.0100 (4)0.0149 (4)0.0014 (4)
O20.0827 (7)0.0432 (6)0.0325 (6)0.0161 (5)0.0282 (5)0.0021 (4)
O30.0492 (5)0.0218 (5)0.0319 (5)0.0091 (4)0.0156 (4)0.0025 (4)
O990.0624 (6)0.0315 (5)0.0338 (5)0.0060 (4)0.0176 (4)0.0031 (4)
Geometric parameters (Å, º) top
N1—C11.3161 (16)C5—H50.9300
N1—C91.3637 (15)C6—C71.4066 (17)
N1—H1N0.8575C6—H60.9300
C1—C21.3848 (18)C7—C81.3850 (16)
C1—H10.9300C7—C101.4943 (17)
C2—C31.3591 (19)C8—O31.3303 (13)
C2—H20.9300C8—C91.4164 (17)
C3—C41.4086 (17)C10—O21.2315 (14)
C3—H30.9300C10—O11.2734 (15)
C4—C91.4019 (17)O3—H3O0.8739
C4—C51.4091 (17)O99—H1O0.8701
C5—C61.3575 (18)O99—H1P0.8393
C1—N1—C9122.08 (11)C5—C6—C7122.45 (11)
C1—N1—H1N114.5C5—C6—H6118.8
C9—N1—H1N123.4C7—C6—H6118.8
N1—C1—C2120.95 (12)C8—C7—C6119.63 (11)
N1—C1—H1119.5C8—C7—C10119.22 (11)
C2—C1—H1119.5C6—C7—C10121.15 (10)
C3—C2—C1119.29 (12)O3—C8—C7123.56 (11)
C3—C2—H2120.4O3—C8—C9118.29 (10)
C1—C2—H2120.4C7—C8—C9118.15 (11)
C2—C3—C4120.56 (12)N1—C9—C4119.40 (11)
C2—C3—H3119.7N1—C9—C8118.92 (11)
C4—C3—H3119.7C4—C9—C8121.67 (10)
C9—C4—C3117.71 (11)O2—C10—O1124.52 (12)
C9—C4—C5118.60 (11)O2—C10—C7119.05 (11)
C3—C4—C5123.68 (11)O1—C10—C7116.43 (10)
C6—C5—C4119.49 (11)C8—O3—H3O103.1
C6—C5—H5120.3H1O—O99—H1P111.8
C4—C5—H5120.3
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1N···O990.861.822.6548 (13)166
O3—H3O···O10.871.652.4692 (11)155
O99—H1O···O2i0.871.882.7027 (13)158
O99—H1P···O1ii0.841.922.7513 (13)171
C1—H1···O2i0.932.343.1934 (16)153
Symmetry codes: (i) x, y, z+1; (ii) x+1, y+1, z+1.

Experimental details

Crystal data
Chemical formulaC10H7NO3·H2O
Mr207.18
Crystal system, space groupTriclinic, P1
Temperature (K)291
a, b, c (Å)7.0045 (4), 7.6512 (5), 9.4192 (5)
α, β, γ (°)87.877 (5), 71.718 (5), 73.083 (5)
V3)457.76 (5)
Z2
Radiation typeMo Kα
µ (mm1)0.12
Crystal size (mm)0.02 × 0.01 × 0.01
Data collection
DiffractometerKuma KM4 CCD area-detector
diffractometer
Absorption correctionNumerical
(X-RED; Stoe & Cie, 1999)
Tmin, Tmax0.997, 1.000
No. of measured, independent and
observed [I > 2σ(I)] reflections
4445, 1608, 1230
Rint0.031
(sin θ/λ)max1)0.596
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.032, 0.092, 0.99
No. of reflections1608
No. of parameters136
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)0.15, 0.25

Computer programs: CrysAlis CCD (Oxford Diffraction, 2006), CrysAlis RED (Oxford Diffraction, 2006), SHELXS97 (Sheldrick, 2008), XP in SHELXTL/PC (Sheldrick, 2008) and ORTEP-3 for Windows (Version 1.062; Farrugia, 1997), SHELXL97 (Sheldrick, 2008) and PLATON (Spek, 2003).

Experimental hydrogen-bond geometry for (I) (Å, °), total energy E (kcal mol-1) and principal `delocalisation' energy Edel(1), calculated on the NBO basis. See text for a detailed description of the abbreviations and methods used. top
D—H···AD—HH···AD···AD—H···AEEdel(1)
N1—H1N···O990.861.822.6548 (13)165.83.332.74
O3—H3O···O10.871.652.4692 (11)154.71.64
O99—H1O···O2i0.871.882.7027 (13)157.87.036.40
O99—H1P···O1ii0.841.922.7513 (13)171.17.456.18
C1—H1···O2i0.932.343.1934 (16)152.8Non-bonding interaction
Symmetry codes: (i) x, y, z + 1; (ii) -x + 1, -y + 1, -z + 1.
Experimental stacking interaction geometry (Å, °) for (I) and principal `delocalisation' energy for CgJ CgK Edel(1, J K) and CgK CgJ Edel(1, K J) transitions, calculated on the MP2-NBO basis. top
CgJ···CgKCg···CgαβCgJperpEdel(1, J K)Edel(1, K J)
CgN···CgNiii4.9826 (16)047.61 (12)3.3594 (15)0.960.96
CgN···CgCiii3.6427 (18)0.615 (11)23.35 (11)3.3287 (18)1.611.48
CgC···CgNiii3.6427 (18)0.615 (11)23.96 (11)3.3444 (18)1.481.61
CgC···CgCiii3.6413 (19)023.67 (11)3.3350 (18)1.161.16
CgN···CgCiV4.7996 (18)0.615 (11)45.87 (11)3.3774 (18)3.233.10
CgC···CgNiV4.7996 (18)0.615 (11)45.28 (11)3.3418 (18)3.103.23
CgC···CgCiV3.6505 (19)022.56 (11)3.3711 (18)7.587.58
CgN and CgC are the ring centroids of the six-membered pyridine and benzene rings, respectively. Cg···Cg is the perpendicular distance between the first ring centroid and that of the second ring, α is the dihedral angle between planes J and K, β is the angle between the vector linking the ring centroid and the normal to ring J, and CgJperp is the perpendicular distance from the J ring centroid to ring K. Symmetry codes: (iii) -x + 1, -y + 2, -z + 1; (iv) -x, -y + 2, -z + 1.
 

Subscribe to Acta Crystallographica Section C: Structural Chemistry

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow Acta Cryst. C
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds