organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoIUCrDATA
ISSN: 2414-3146

Piperazin-1-ium 4-amino­benzoate monohydrate

aResearch and Development Centre, Bharathiar University, Coimbatore 641 046, India, bDepartment of Physics, CPCL Polytechnic College, Chennai 600 068, India, cDepartment of Physics, Presidency College, Chennai 600 005, India, dDepartment of Physics, Alagappa University, Karaikkudi 630 003, India, and eDepartment of Physics, The American College, Madurai 625 002, India
*Correspondence e-mail: , chakkaravarthi_2005@yahoo.com

Edited by J. Simpson, University of Otago, New Zealand (Received 17 May 2016; accepted 19 May 2016; online 24 May 2016)

The asymmetric unit of the title hydrated salt, C4H11N2+·C7H6NO2·H2O, contains a piperazin-1-ium cation, a 4-amino­benzoate anion and a water mol­ecule. One NH group of the piperazine ring is protonated and this ring adopts a chair conformation. The anion of this salt is generated by deprotonation of the OH group of the carb­oxy­lic acid substituent of 4-amino­benzoic acid. The benzene ring makes a dihedral angle of 2.6 (2)° with the carboxyl­ate substituent. The anion and the solvent water mol­ecule are linked by an N—H⋯O hydrogen bond. Additional N—H⋯O and O—H⋯O hydrogen bonds connect adjacent anions through the water mol­ecules, generating a two-dimensional network parallel to (100), forming R33(12) ring motifs. Adjacent cations are linked by N—H⋯N hydrogen bonds into infinite chains along (001). These chains are linked to the two-dimensional network of anions and water mol­ecules by another N—H⋯O hydrogen bond, forming a three-dimensional network.

3D view (loading...)
[Scheme 3D1]
Chemical scheme
[Scheme 1]

Structure description

In a continuation of our studies of piperazine derivatives, which are known to exhibit anti-bacterial, anti­malarial (Chaudhary et al., 2006[Chaudhary, P., Kumar, R., Verma, K., Singh, D., Yadav, V., Chhillar, A. K., Sharma, G. L. & Chandra, R. (2006). Bioorg. Med. Chem. 14, 1819-1826.]) and anti­microbial (Kharb et al., 2012[Kharb, R., Bansal, K. & Sharma, A. K. (2012). Pharma Chem. 4, 2470-2488.]) activity, we report herein the synthesis and crystal structure of the title compound, Fig. 1[link].

[Figure 1]
Figure 1
The asymmetric unit of the title mol­ecular salt, showing the atom labelling and 30% probability displacement ellipsoids.

The asymmetric unit contains a piperazin-1-ium cation, a 4-amino benzoate anion and a water mol­ecule. In this organic salt, one NH group of the piperazine ring is protonated while the OH group of the carb­oxy­lic acid substituent of 4-amino benzoic acid is deprotonated. The bond lengths are in normal ranges and comparable to those found in a related structure (Wei, 2011[Wei, B. (2011). Acta Cryst. E67, o2811.]). The piperazinium ring adopts a chair conformation, with puckering parameters Q = 0.547 (3) Å, θ = 180.0 (3), ψ = 23 (3)°. The C1–C6 benzene ring in the anion subtends a dihedral angle of 2.6 (2)° to the carboxyl­ate (O1/C7/O2) substituent.

In the asymmetric unit, the anion and water mol­ecule are linked via an inter­molecular N1—H1B⋯O3 hydrogen bond. Additional N—H⋯O and O—H⋯O hydrogen bonds, Table 1[link], connect the anions through water mol­ecules into a two-dimensional network parallel to (100) and generates an R33(12) ring motif, Fig. 2[link]. The cations are linked by an N—H⋯N hydrogen bond into infinite chains along (001). These cation chains are also linked to the two-dimensional network of anions and water mol­ecules by an N3—H3B⋯O1 hydrogen bond, forming a three-dimensional network, Fig. 3[link].

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
N1—H1B⋯O3 0.86 2.19 3.027 (3) 165
N1—H1A⋯O2i 0.86 2.12 2.962 (2) 168
N2—H2A⋯N1ii 0.88 (1) 2.57 (2) 3.335 (3) 147 (2)
N3—H3A⋯N2iii 0.90 1.92 2.793 (2) 165
N3—H3B⋯O1iv 0.90 1.84 2.726 (2) 166
O3—H3C⋯O2v 0.83 (1) 1.91 (1) 2.737 (2) 176 (4)
O3—H3D⋯O1vi 0.83 (1) 1.95 (1) 2.776 (2) 177 (3)
Symmetry codes: (i) [-x+{\script{3\over 2}}, y-{\script{1\over 2}}, z-{\script{1\over 2}}]; (ii) [x-{\script{1\over 2}}, -y+{\script{3\over 2}}, z]; (iii) [-x+1, -y+1, z+{\script{1\over 2}}]; (iv) x, y-1, z; (v) [x+{\script{1\over 2}}, -y+{\script{3\over 2}}, z]; (vi) [-x+{\script{3\over 2}}, y-{\script{1\over 2}}, z+{\script{1\over 2}}].
[Figure 2]
Figure 2
A partial view of the crystal packing, showing the R33(12) ring motif. The hydrogen bonds are shown as dashed lines (see Table 1[link]) and C-bound H atoms have been omitted for clarity.
[Figure 3]
Figure 3
The crystal packing of the title compound, viewed along the b axis.

Synthesis and crystallization

The title compound was synthesized from 4-amino-benzoic acid (1.828 g) and piperazine (1.148 g) in an equimolar ratio. The reactants were dissolved in 10 ml of acetone and the solvent was allowed to slowly evaporate at room temperature. After one week, crystals suitable for X-ray diffraction were obtained.

Refinement

Crystal data, data collection and structure refinement details are summarized in Table 2[link].

Table 2
Experimental details

Crystal data
Chemical formula C4H11N2+·C7H6NO2·H2O
Mr 241.29
Crystal system, space group Orthorhombic, Pna21
Temperature (K) 295
a, b, c (Å) 18.2964 (14), 7.1388 (6), 10.3574 (6)
V3) 1352.83 (17)
Z 4
Radiation type Mo Kα
μ (mm−1) 0.09
Crystal size (mm) 0.28 × 0.24 × 0.20
 
Data collection
Diffractometer Bruker Kappa APEXII CCD
Absorption correction Multi-scan (SADABS; Bruker, 2004[Bruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.])
Tmin, Tmax 0.976, 0.983
No. of measured, independent and observed [I > 2σ(I)] reflections 15633, 2648, 1981
Rint 0.039
(sin θ/λ)max−1) 0.616
 
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.038, 0.091, 1.06
No. of reflections 2648
No. of parameters 167
No. of restraints 5
H-atom treatment H atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å−3) 0.12, −0.12
Computer programs: APEX2 and SAINT (Bruker, 2004[Bruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]), SHELXS97 and SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]) and PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]).

Structural data


Synthesis and crystallization top

The title compound was synthesized from 4-amino-benzoic acid (1.828 g) and piperazine (1.148 g) in an equimolar ratio. The rea­cta­nts were dissolved in 10 ml of acetone and the solvent was allowed to slowly evaporate at room temperature. After one week, crystals suitable for X-ray diffraction were obtained.

Refinement top

Crystal data, data collection and structure refinement details are summarized in Table 1

Experimental top

The title compound was synthesized from 4-amino-benzoic acid (1.828 g) and piperazine (1.148 g) in an equimolar ratio. The reactants were dissolved in 10 ml of acetone and the solvent was allowed to slowly evaporate at room temperature. After one week, crystals suitable for X-ray diffraction were obtained.

Refinement top

Crystal data, data collection and structure refinement details are summarized in Table 2.

Structure description top

In a continuation of our studies of piperazine derivatives, which are known to exhibit anti-bacterial, antimalarial (Chaudhary et al., 2006) and antimicrobial (Kharb et al., 2012) activity, we report herein the synthesis and crystal structure of the title compound, Fig. 1.

The asymmetric unit contains a piperazin-1-ium cation, a 4-amino benzoate anion and a water molecule. In this organic salt, one NH group of the piperazinium ring is protonated while the OH group of the carboxylic acid substituent of 4-amino benzoic acid is deprotonated. The bond lengths are in normal ranges and comparable to those found in a related structure (Wei, 2011). The piperazinium ring adopts a chair conformation, with puckering parameters Q = 0.547 (3) Å, θ = 180.0 (3), ψ = 23 (3)°. The C1–C6 benzene ring in the anion subtends a dihedral angle of 2.6 (2)° to the carboxylate (O1/C7/O2) substituent.

In the asymmetric unit, the anion and water molecule are linked via an intermolecular N1—H1B···O3 hydrogen bond. Additional N—H···O and O—H···O hydrogen bonds, Table 1, connect the anions through water molecules into a two-dimensional network parallel to (100) and generates an R33(12) ring motif, Fig. 2. The cations are linked by an N—H···N hydrogen bond into infinite chains along (001). These cation chains are also linked to the two-dimensional network of anions and water molecules by an N3—H3B···O1 hydrogen bond, forming a three-dimensional network, Fig. 3.

Computing details top

Data collection: APEX2 (Bruker, 2004); cell refinement: SAINT (Bruker, 2004); data reduction: SAINT (Bruker, 2004); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: PLATON (Spek, 2009); software used to prepare material for publication: SHELXL97 (Sheldrick, 2008) and PLATON (Spek, 2009).

Figures top
[Figure 1] Fig. 1. The asymmetric unit of the title molecular salt, showing the atom labelling and 30% probability displacement ellipsoids.
[Figure 2] Fig. 2. A partial view of the crystal packing, showing the R33(12) ring motif. The hydrogen bonds are shown as dashed lines (see Table 1) and C-bound H atoms have been omitted for clarity.
[Figure 3] Fig. 3. The crystal packing of the title compound, viewed along the b axis.
Piperazin-1-ium 4-aminobenzoate monohydrate top
Crystal data top
C4H11N2+·C7H6NO2·H2OF(000) = 520
Mr = 241.29Dx = 1.185 Mg m3
Orthorhombic, Pna21Mo Kα radiation, λ = 0.71073 Å
Hall symbol: P 2c -2nCell parameters from 5261 reflections
a = 18.2964 (14) Åθ = 2.2–25.9°
b = 7.1388 (6) ŵ = 0.09 mm1
c = 10.3574 (6) ÅT = 295 K
V = 1352.83 (17) Å3Block, colourless
Z = 40.28 × 0.24 × 0.20 mm
Data collection top
Bruker Kappa APEXII CCD
diffractometer
2648 independent reflections
Radiation source: fine-focus sealed tube1981 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.039
ω and φ scanθmax = 26.0°, θmin = 2.2°
Absorption correction: multi-scan
(SADABS; Bruker, 2004)
h = 2222
Tmin = 0.976, Tmax = 0.983k = 88
15633 measured reflectionsl = 1212
Refinement top
Refinement on F2Secondary atom site location: difference Fourier map
Least-squares matrix: fullHydrogen site location: inferred from neighbouring sites
R[F2 > 2σ(F2)] = 0.038H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.091 w = 1/[σ2(Fo2) + (0.0381P)2 + 0.1919P]
where P = (Fo2 + 2Fc2)/3
S = 1.06(Δ/σ)max < 0.001
2648 reflectionsΔρmax = 0.12 e Å3
167 parametersΔρmin = 0.12 e Å3
5 restraintsExtinction correction: SHELXL97 (Sheldrick, 2008), Fc*=kFc[1+0.001xFc2λ3/sin(2θ)]-1/4
Primary atom site location: structure-invariant direct methodsExtinction coefficient: 0.0150 (17)
Crystal data top
C4H11N2+·C7H6NO2·H2OV = 1352.83 (17) Å3
Mr = 241.29Z = 4
Orthorhombic, Pna21Mo Kα radiation
a = 18.2964 (14) ŵ = 0.09 mm1
b = 7.1388 (6) ÅT = 295 K
c = 10.3574 (6) Å0.28 × 0.24 × 0.20 mm
Data collection top
Bruker Kappa APEXII CCD
diffractometer
2648 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2004)
1981 reflections with I > 2σ(I)
Tmin = 0.976, Tmax = 0.983Rint = 0.039
15633 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0385 restraints
wR(F2) = 0.091H atoms treated by a mixture of independent and constrained refinement
S = 1.06Δρmax = 0.12 e Å3
2648 reflectionsΔρmin = 0.12 e Å3
167 parameters
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > 2sigma(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C10.68490 (11)0.8943 (3)0.39677 (18)0.0397 (5)
C20.72877 (11)0.8264 (3)0.49587 (19)0.0456 (5)
H20.71510.84820.58110.055*
C30.79165 (12)0.7279 (3)0.4713 (2)0.0498 (6)
H30.82000.68430.53950.060*
C40.81335 (11)0.6927 (3)0.34408 (19)0.0443 (5)
C50.77022 (11)0.7605 (3)0.24516 (19)0.0468 (5)
H50.78370.73870.15990.056*
C60.70757 (11)0.8600 (3)0.27110 (19)0.0431 (5)
H60.67970.90530.20280.052*
C70.61580 (11)0.9950 (3)0.4256 (2)0.0421 (5)
C80.43405 (14)0.4288 (4)0.2356 (2)0.0613 (7)
H8A0.44650.31010.19580.074*
H8B0.38460.46060.20970.074*
C90.43638 (14)0.4070 (4)0.3798 (2)0.0588 (7)
H9A0.41880.52080.42060.071*
H9B0.40470.30480.40580.071*
C100.56413 (18)0.5115 (4)0.3763 (2)0.0717 (8)
H10A0.61360.47500.39890.086*
H10B0.55370.63050.41750.086*
C110.55779 (16)0.5321 (4)0.2312 (3)0.0713 (8)
H11A0.58980.63230.20290.086*
H11B0.57420.41720.19040.086*
N10.87752 (10)0.5984 (3)0.31881 (19)0.0653 (6)
H1A0.89130.58090.24040.078*
H1B0.90380.55700.38150.078*
N20.48383 (14)0.5724 (3)0.18885 (18)0.0634 (6)
N30.51219 (11)0.3684 (3)0.42236 (16)0.0506 (5)
H3A0.51350.36440.50920.061*
H3B0.52600.25540.39250.061*
O10.57619 (8)1.0491 (2)0.33263 (13)0.0584 (4)
O20.59834 (8)1.0228 (3)0.54085 (13)0.0615 (5)
O30.94991 (10)0.4935 (3)0.57142 (17)0.0714 (5)
H2A0.4749 (15)0.677 (2)0.231 (2)0.083 (10)*
H3C0.9945 (6)0.492 (5)0.560 (4)0.109 (12)*
H3D0.9410 (16)0.508 (4)0.6489 (12)0.084 (10)*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
C10.0390 (11)0.0435 (12)0.0365 (11)0.0028 (10)0.0000 (9)0.0025 (9)
C20.0447 (12)0.0605 (14)0.0315 (11)0.0010 (11)0.0013 (9)0.0008 (10)
C30.0497 (13)0.0617 (16)0.0380 (11)0.0075 (12)0.0032 (10)0.0070 (10)
C40.0435 (12)0.0434 (13)0.0459 (12)0.0040 (10)0.0021 (10)0.0007 (10)
C50.0494 (12)0.0581 (15)0.0329 (10)0.0028 (12)0.0040 (9)0.0011 (10)
C60.0413 (11)0.0540 (15)0.0341 (11)0.0007 (11)0.0039 (9)0.0019 (9)
C70.0370 (12)0.0505 (13)0.0387 (11)0.0024 (10)0.0021 (9)0.0057 (10)
C80.0640 (15)0.0687 (18)0.0510 (14)0.0107 (13)0.0036 (12)0.0046 (12)
C90.0678 (16)0.0578 (16)0.0509 (13)0.0121 (13)0.0104 (11)0.0066 (12)
C100.093 (2)0.0741 (19)0.0479 (14)0.0296 (16)0.0116 (13)0.0068 (13)
C110.088 (2)0.076 (2)0.0495 (15)0.0304 (16)0.0042 (14)0.0085 (13)
N10.0639 (13)0.0832 (15)0.0486 (11)0.0303 (12)0.0019 (10)0.0007 (11)
N20.1045 (18)0.0488 (13)0.0371 (10)0.0057 (13)0.0009 (11)0.0033 (10)
N30.0736 (13)0.0448 (10)0.0335 (9)0.0042 (10)0.0001 (9)0.0006 (8)
O10.0590 (9)0.0783 (12)0.0379 (8)0.0226 (8)0.0080 (8)0.0100 (8)
O20.0460 (8)0.1006 (13)0.0378 (9)0.0128 (9)0.0010 (7)0.0088 (8)
O30.0476 (11)0.1231 (16)0.0434 (10)0.0115 (11)0.0006 (8)0.0115 (10)
Geometric parameters (Å, º) top
C1—C61.388 (3)C9—N31.481 (3)
C1—C21.390 (3)C9—H9A0.9700
C1—C71.485 (3)C9—H9B0.9700
C2—C31.372 (3)C10—N31.475 (3)
C2—H20.9300C10—C111.514 (3)
C3—C41.399 (3)C10—H10A0.9700
C3—H30.9300C10—H10B0.9700
C4—N11.379 (3)C11—N21.451 (4)
C4—C51.381 (3)C11—H11A0.9700
C5—C61.375 (3)C11—H11B0.9700
C5—H50.9300N1—H1A0.8600
C6—H60.9300N1—H1B0.8600
C7—O21.252 (2)N2—H2A0.878 (10)
C7—O11.265 (2)N3—H3A0.9000
C8—N21.454 (3)N3—H3B0.9000
C8—C91.502 (3)O3—H3C0.825 (10)
C8—H8A0.9700O3—H3D0.825 (10)
C8—H8B0.9700
C6—C1—C2117.26 (18)C8—C9—H9A109.7
C6—C1—C7121.92 (17)N3—C9—H9B109.7
C2—C1—C7120.80 (17)C8—C9—H9B109.7
C3—C2—C1121.72 (18)H9A—C9—H9B108.2
C3—C2—H2119.1N3—C10—C11109.8 (2)
C1—C2—H2119.1N3—C10—H10A109.7
C2—C3—C4120.33 (19)C11—C10—H10A109.7
C2—C3—H3119.8N3—C10—H10B109.7
C4—C3—H3119.8C11—C10—H10B109.7
N1—C4—C5121.14 (18)H10A—C10—H10B108.2
N1—C4—C3120.55 (19)N2—C11—C10113.0 (2)
C5—C4—C3118.28 (18)N2—C11—H11A109.0
C6—C5—C4120.83 (17)C10—C11—H11A109.0
C6—C5—H5119.6N2—C11—H11B109.0
C4—C5—H5119.6C10—C11—H11B109.0
C5—C6—C1121.59 (18)H11A—C11—H11B107.8
C5—C6—H6119.2C4—N1—H1A120.0
C1—C6—H6119.2C4—N1—H1B120.0
O2—C7—O1122.08 (19)H1A—N1—H1B120.0
O2—C7—C1119.08 (18)C11—N2—C8110.1 (2)
O1—C7—C1118.84 (18)C11—N2—H2A101.1 (19)
N2—C8—C9112.7 (2)C8—N2—H2A108.4 (19)
N2—C8—H8A109.0C10—N3—C9112.22 (19)
C9—C8—H8A109.0C10—N3—H3A109.2
N2—C8—H8B109.0C9—N3—H3A109.2
C9—C8—H8B109.0C10—N3—H3B109.2
H8A—C8—H8B107.8C9—N3—H3B109.2
N3—C9—C8109.97 (19)H3A—N3—H3B107.9
N3—C9—H9A109.7H3C—O3—H3D110 (3)
C6—C1—C2—C30.5 (3)C6—C1—C7—O2179.6 (2)
C7—C1—C2—C3177.9 (2)C2—C1—C7—O22.0 (3)
C1—C2—C3—C40.1 (3)C6—C1—C7—O10.8 (3)
C2—C3—C4—N1178.2 (2)C2—C1—C7—O1177.6 (2)
C2—C3—C4—C50.4 (3)N2—C8—C9—N355.7 (3)
N1—C4—C5—C6177.8 (2)N3—C10—C11—N254.9 (3)
C3—C4—C5—C60.0 (3)C10—C11—N2—C855.8 (3)
C4—C5—C6—C10.7 (3)C9—C8—N2—C1156.3 (3)
C2—C1—C6—C50.9 (3)C11—C10—N3—C953.9 (3)
C7—C1—C6—C5177.5 (2)C8—C9—N3—C1054.6 (3)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1B···O30.862.193.027 (3)165
N1—H1A···O2i0.862.122.962 (2)168
N2—H2A···N1ii0.88 (1)2.57 (2)3.335 (3)147 (2)
N3—H3A···N2iii0.901.922.793 (2)165
N3—H3B···O1iv0.901.842.726 (2)166
O3—H3C···O2v0.83 (1)1.91 (1)2.737 (2)176 (4)
O3—H3D···O1vi0.83 (1)1.95 (1)2.776 (2)177 (3)
Symmetry codes: (i) x+3/2, y1/2, z1/2; (ii) x1/2, y+3/2, z; (iii) x+1, y+1, z+1/2; (iv) x, y1, z; (v) x+1/2, y+3/2, z; (vi) x+3/2, y1/2, z+1/2.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1B···O30.862.193.027 (3)165
N1—H1A···O2i0.862.122.962 (2)168
N2—H2A···N1ii0.878 (10)2.565 (17)3.335 (3)147 (2)
N3—H3A···N2iii0.901.922.793 (2)165
N3—H3B···O1iv0.901.842.726 (2)166
O3—H3C···O2v0.825 (10)1.912 (11)2.737 (2)176 (4)
O3—H3D···O1vi0.825 (10)1.951 (10)2.776 (2)177 (3)
Symmetry codes: (i) x+3/2, y1/2, z1/2; (ii) x1/2, y+3/2, z; (iii) x+1, y+1, z+1/2; (iv) x, y1, z; (v) x+1/2, y+3/2, z; (vi) x+3/2, y1/2, z+1/2.

Experimental details

Crystal data
Chemical formulaC4H11N2+·C7H6NO2·H2O
Mr241.29
Crystal system, space groupOrthorhombic, Pna21
Temperature (K)295
a, b, c (Å)18.2964 (14), 7.1388 (6), 10.3574 (6)
V3)1352.83 (17)
Z4
Radiation typeMo Kα
µ (mm1)0.09
Crystal size (mm)0.28 × 0.24 × 0.20
Data collection
DiffractometerBruker Kappa APEXII CCD
Absorption correctionMulti-scan
(SADABS; Bruker, 2004)
Tmin, Tmax0.976, 0.983
No. of measured, independent and
observed [I > 2σ(I)] reflections
15633, 2648, 1981
Rint0.039
(sin θ/λ)max1)0.616
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.038, 0.091, 1.06
No. of reflections2648
No. of parameters167
No. of restraints5
H-atom treatmentH atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å3)0.12, 0.12

Computer programs: APEX2 (Bruker, 2004), SAINT (Bruker, 2004), SHELXS97 (Sheldrick, 2008), SHELXL97 (Sheldrick, 2008) and PLATON (Spek, 2009).

 

Acknowledgements

The authors acknowledge the SAIF, IIT, Madras, for the data collection.

References

First citationBruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationChaudhary, P., Kumar, R., Verma, K., Singh, D., Yadav, V., Chhillar, A. K., Sharma, G. L. & Chandra, R. (2006). Bioorg. Med. Chem. 14, 1819–1826.  CrossRef PubMed CAS Google Scholar
First citationKharb, R., Bansal, K. & Sharma, A. K. (2012). Pharma Chem. 4, 2470–2488.  CAS Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationWei, B. (2011). Acta Cryst. E67, o2811.  Web of Science CSD CrossRef IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoIUCrDATA
ISSN: 2414-3146
Follow IUCr Journals
Sign up for e-alerts
Follow IUCr on Twitter
Follow us on facebook
Sign up for RSS feeds