Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
High-resolution X-ray diffraction techniques have been employed successfully to evaluate crystalline quality and long-term stability of coiled membranes. The process of fabrication involves photolithography, implantation by 2 MeV N^{2+} ions in n-type GaAs substrates, followed by selective etching. A five-crystal X-ray diffractometer was employed in (+, −, +) setting with an Mo Kα1 exploring beam for high-resolution X-ray diffractometry and topography experiments. The exploring-beam width was reduced to illuminate different segments of the coiled membrane. Diffraction curves recorded from the bulk crystal surrounding the sensor had a half width of 26 arcseconds, whereas the half widths from sensor segments were in the range ∼58 to ∼166 arcseconds. Different segments (particularly vertical ones) were identified from the observed angular separations between different diffraction peaks as well as from the shape of the diffraction peaks. It was found that different segments of the sensor were tilted with respect to one another and the tilt angles were in the range 15–212 arcseconds. High-resolution X-ray diffraction topographs recorded from (5\bar 11) and (400) diffracting planes revealed that the sides of the trough below the membrane created by etching are not vertical, but tapered. Also, there is a thin strip of crystal freely hanging over the tapered regions as a result of underetching. The surface of the cavity is uneven. The structural perfection of different membrane segments could also be ascertained from the contrast in topographs.

Subscribe to Journal of Applied Crystallography

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow J. Appl. Cryst.
Sign up for e-alerts
Follow J. Appl. Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds