Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
Grain-interaction and residual stress depth gradients in a sputter-deposited Cu thin film (thickness 4 µm) were determined by employing X-ray diffraction stress measurements at constant information depths in the range between 200 and about 1500 nm. A novel procedure, which allows the determination of an effective grain-interaction parameter on the basis of the f(ψ, hkl) method and the Voigt and Reuss models of elastic grain interaction, was used. The range of accessible penetration depths was maximized by employing different photon energies using a laboratory diffractometer with Cu Kα radiation and a diffractometer at a synchrotron beamline. The variation of grain interaction with depth could be successfully related to the microstructure of the specimen. The tensile residual stress in the film parallel to its surface decreases with decreasing depth. By measuring the lattice spacing for several reflections at one penetration depth with two different photon energies (i.e. using small and large incident beam angles) it was found that the surface roughness of the specimen counteracts the effect of beam refraction to some degree. As a consequence, irrespective of whether a refraction correction is applied or neglected for the low-incidence angle measurement, erroneous results are obtained for lattice spacings derived from reflections at small incidence angles; reliable grain-interaction and stress analysis requires measurements at high incidence angle.

Subscribe to Journal of Applied Crystallography

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow J. Appl. Cryst.
Sign up for e-alerts
Follow J. Appl. Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds