organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Volume 69| Part 11| November 2013| Pages o1667-o1668

Bis(L-serinium) oxalate dihydrate: polymorph II

aChemistry Department, University of Warsaw, Pasteura 1, 02-093 Warszawa, Poland, and, Centre of New Technologies, University of Warsaw, Zwirki i Wigury 93, 02-089 Warszawa, Poland, and bChemistry Department, University of Warsaw, Pasteura 1, 02-093 Warszawa, Poland
*Correspondence e-mail: kwozniak@chem.uw.edu.pl

(Received 13 June 2013; accepted 3 October 2013; online 19 October 2013)

A corrected and improved structure of the polymorph II of 2C3H8NO3+·C2O42−·2H2O, based on single-crystal data, is presented. The structure is refined with anisotropic displacement parameters for all non-H atoms and all H atoms are located. Due to the charged moieties, the structure is classified as a mol­ecular salt. Inter­molecular O—H⋯O, O—H⋯O and N+—H⋯Ohydrogen bonds link the components of the structure. The L-serinium cations and oxalate anions form a network of channels in [100] direction, filled with the water molecules of crystallization. The dihedral angle between the CO2 units of the oxalate dianion is 10.2 (3)°

Related literature

Crystallization of serine with oxalic acid leads to diverse mol­ecular salts, with some of them exhibiting polymorphism. The polymorphs I and II of 2C3H7NO3+·C2O42−·2H2O have already been described, see: Braga et al. (2013[Braga, D., Chelazzi, L., Ciabatti, I. & Grepioni, F. (2013). New J. Chem. 37, 97-104.]). Form II was determined by powder X-ray diffraction methods and therefore the crystal structure lacks properly located H atoms and anisotropic displacement parameters of all heavy atoms in the structure.

[Scheme 1]

Experimental

Crystal data
  • 2C3H8NO3+·C2O42−·2H2O

  • Mr = 336.26

  • Monoclinic, P 21

  • a = 5.1524 (2) Å

  • b = 11.1467 (4) Å

  • c = 12.4478 (5) Å

  • β = 99.967 (4)°

  • V = 704.12 (5) Å3

  • Z = 2

  • Mo Kα radiation

  • μ = 0.15 mm−1

  • T = 90 K

  • 0.28 × 0.10 × 0.08 mm

Data collection
  • Agilent Xcalibur Opal diffractometer

  • Absorption correction: multi-scan [SCALE3 ABSPACK (Blessing, 1995[Blessing, R. H. (1995). Acta Cryst. A51, 33-38.]) and CrysAlis PRO (Agilent, 2012[Agilent (2012). CrysAlis PRO. Agilent Technologies, Yarnton, Oxfordshire, England.])] Tmin = 0.980, Tmax = 1.000

  • 17202 measured reflections

  • 2876 independent reflections

  • 2430 reflections with I > 2σ(I)

  • Rint = 0.030

Refinement
  • R[F2 > 2σ(F2)] = 0.032

  • wR(F2) = 0.065

  • S = 1.01

  • 2876 reflections

  • 217 parameters

  • 5 restraints

  • H atoms treated by a mixture of independent and constrained refinement

  • Δρmax = 0.17 e Å−3

  • Δρmin = −0.17 e Å−3

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
N1—H1A⋯O9i 0.89 1.94 2.826 (2) 172
N1—H1B⋯O4ii 0.89 2.00 2.809 (2) 151
N1—H1C⋯O6iii 0.89 1.99 2.779 (2) 148
N1—H1C⋯O4iii 0.89 2.34 3.044 (2) 136
N2—H2A⋯O7 0.89 2.14 3.020 (2) 172
N2—H2A⋯O5 0.89 2.66 3.200 (2) 120
N2—H2B⋯O7iv 0.89 2.04 2.922 (2) 169
N2—H2C⋯O8ii 0.89 1.93 2.811 (2) 168
O2—H2D⋯O6iv 0.82 1.69 2.5122 (19) 175
O3—H3⋯O4iii 0.82 1.98 2.7887 (18) 168
O8—H8A⋯O9i 0.84 (1) 2.08 (1) 2.910 (2) 174 (2)
O8—H8B⋯O13v 0.84 (1) 1.90 (1) 2.730 (2) 167 (2)
O9—H9A⋯O8 0.84 (1) 2.07 (1) 2.911 (2) 175 (2)
O9—H9B⋯O3vi 0.84 (1) 1.94 (1) 2.7607 (19) 164 (2)
O12—H12A⋯O5vii 0.82 1.73 2.5513 (19) 177
O13—H13⋯O5 0.82 1.98 2.7637 (19) 159
O13—H13⋯O7 0.82 2.55 3.0521 (19) 121
Symmetry codes: (i) x-1, y, z; (ii) [-x+1, y+{\script{1\over 2}}, -z+1]; (iii) [-x, y+{\script{1\over 2}}, -z+1]; (iv) x+1, y, z; (v) x, y, z-1; (vi) [-x+1, y-{\script{1\over 2}}, -z+1]; (vii) [-x+2, y+{\script{1\over 2}}, -z+2].

Data collection: CrysAlis PRO (Agilent, 2012[Agilent (2012). CrysAlis PRO. Agilent Technologies, Yarnton, Oxfordshire, England.]); cell refinement: CrysAlis PRO; data reduction: CrysAlis PRO and SORTAV (Blessing, 1995[Blessing, R. H. (1995). Acta Cryst. A51, 33-38.]); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008[Sheldrick, G. M. (2008). Acta Cryst. A64, 112-122.]); molecular graphics: ORTEP-3 for Windows (Farrugia, 2012[Farrugia, L. J. (2012). J. Appl. Cryst. 45, 849-854.]) and DIAMOND (Brandenburg, 1999[Brandenburg, K. (1999). DIAMOND. Crystal Impact GbR, Bonn, Germany.]); software used to prepare material for publication: SHELXL97.

Supporting information


Comment top

Divers crystal forms of molecular salts of L-serine with oxalic acid can be obtained by grinding or kneading powders of both compounds, as decribed earlier (Braga et al., 2013). However, previously reported structure of form II of 2C3H7NO3+.C2O42-.2H2O was based on powder diffraction X-ray data and therefore hydrogen atoms were positioned geometrically (including –NH3+ and –COOH groups) and the structure refined with isotropic displacement parameters for for L-serinium cations. Moreover, the H atoms of water molecules were not located. Crystallization of the polymorph II of 2C3H7NO3+.C2O42-.2H2O is also possible by slow evaporation from water solution and it results in crystals of the size sufficient to perform single-crystal X-ray diffraction experiment. Hence, the proper H-atom positions can be found. Both hydrate polymorphs have different unit-cell dimensions, whereas crystal packing remains virtually very similar, with a characteristic motif of the zigzag chains formed by hydrogen bonds between the water molecules along the [100] direction. The location of hydrogen bond network surrounding the oxalate anion allows for discrimination between the polymorphic forms. The form I contains 8 hydrogen bonds between the oxalate anion and 6 neighbouring serine cations. In the polymorph II, obtained from powder data, due to the lack of proper positions of H-atoms, one can suspect the presence of 11 hydrogen bonds around the oxalate anion, located within the donor-acceptor distance in the range from 2.4 to 3.0 Å. In the polymorph II structure derived from single-crystal X-ray diffraction data, 9 hydrogen bonds are formed between the oxalate anion to the 6 neighbouring serine cations. This difference results from a wrong assignment of the carboxylic H-atom in one of the serinium cations in the structure obtained from powder data (see Fig.1, atoms O2 and O12).Both structures of the form II have different distances between the oxalate anions. The structure of Braga et al. (2013) presents a denser arrangement between the oxalate anions. The distances between oxygen atoms from neighbouring anions for the structure obtained by single crystal X-ray measurement range from 3.237 (2) to 4.975 (2) Å. The corresponding values in the structure derived from the powder data are between 2.63 (1) to 4.97 (1) Å.

To compare the unit cell parameters obtained by powder methods at room temperature [a= 12.5711 (6), b= 11.2144 (5), c= 5.2079 (2) Å, β= 100.529 (3)°] these parameters were also determined at room temperature from a single crystal [a= 5.1869 (2), b= 11.1906 (5), c= 12.5305 (5) Å, β= 100.485 (4)°].

Related literature top

Crystallization of serine with oxalic acid leads to diverse molecular salts, with some of them exhibiting polymorphism. The polymorphs I and II of 2C3H7NO3+.C2O42-.2H2O have already been described, see: Braga et al. (2013). Form II was determined by powder X-ray diffraction methods and therefore the crystal structure lacks properly described and located H atoms, including positions of water H atoms and anisotropic displacement parameters of L-serinium cations.

Experimental top

A mixture of L-serine (0.158 mg) with oxalic acid (0.068 mg) was dissolved in water (15 mL) in the 2:1 stoichiometric ratio and set aside to crystallize by slow evaporation at 309 K. Little needle-shaped crystals of bis(L-serinium) oxalate dihydrate form II (m.p. 357 K) have grown on bigger needle-shaped crystals of oxalic acid.

Refinement top

All H-atoms bound to C were placed at the calculated positions and were treated as riding on the parent atom with Uiso(H) = 1.2Ueq(C) and C–H distances of 0.98 Å for methine and 0.97 Å for methylene groups. N+-bound H atoms were placed in locations indicated by a difference Fourier synthesis and were refined using a riding model, with Uiso(H) = 1.5Ueq(C) and N– H distance of 0.89 Å. H atoms attached to O were placed in locations indicated by a difference Fourier synthesis and were refined using a riding model with Uiso(H) values set at 1.5 Ueq(O) and with a distance restraint of O–H = 0.82 Å, except for the water molecules for which O-H distances were constrained to 0.840 (5) Å. An absolute structure has been assigned by reference to an unchanging chiral centre in the crystallization procedure. For the refinement 1367 Friedel pairs were not merged.

Computing details top

Data collection: CrysAlis PRO (Agilent, 2012); cell refinement: CrysAlis PRO (Agilent, 2012); data reduction: CrysAlis PRO (Agilent, 2012) and SORTAV (Blessing, 1995); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL97 (Sheldrick, 2008); molecular graphics: ORTEP-3 for Windows (Farrugia, 2012) and DIAMOND (Brandenburg, 1999).

Figures top
[Figure 1] Fig. 1. Atomic displacement parameters at the 50% probability level and atom labeling scheme of the asymmetric part of the unit cell in polymorph II
[Figure 2] Fig. 2. The crystal packing in polymorph II viewed along the a axis. Dashed lines indicate hydrogen bonds.
Bis(L-serinium) oxalate dihydrate top
Crystal data top
2C3H8NO3+·C2O42·2H2OF(000) = 356
Mr = 336.26Dx = 1.586 Mg m3
Monoclinic, P21Melting point: 357 K
Hall symbol: P 2ybMo Kα radiation, λ = 0.71073 Å
a = 5.1524 (2) ÅCell parameters from 8206 reflections
b = 11.1467 (4) Åθ = 1.7–26.4°
c = 12.4478 (5) ŵ = 0.15 mm1
β = 99.967 (4)°T = 90 K
V = 704.12 (5) Å3Needle, colourless
Z = 20.28 × 0.10 × 0.08 mm
Data collection top
Agilent Xcalibur Opal
diffractometer
2876 independent reflections
Radiation source: Enhance (Mo) X-ray Source2430 reflections with I > 2σ(I)
Graphite monochromatorRint = 0.030
Detector resolution: 8.4441 pixels mm-1θmax = 26.4°, θmin = 1.7°
ω scansh = 66
Absorption correction: multi-scan
[SCALE3 ABSPACK (Blessing, 1995) and CrysAlis PRO (Agilent, 2012)]
k = 1313
Tmin = 0.980, Tmax = 1.000l = 1515
17202 measured reflections
Refinement top
Refinement on F20 constraints
Least-squares matrix: fullH atoms treated by a mixture of independent and constrained refinement
R[F2 > 2σ(F2)] = 0.032 w = 1/[σ2(Fo2) + (0.0288P)2]
where P = (Fo2 + 2Fc2)/3
wR(F2) = 0.065(Δ/σ)max < 0.001
S = 1.01Δρmax = 0.17 e Å3
2876 reflectionsΔρmin = 0.17 e Å3
217 parametersAbsolute structure: Flack (1983), 1367 Friedel pairs
5 restraintsAbsolute structure parameter: 0.4 (9)
Crystal data top
2C3H8NO3+·C2O42·2H2OV = 704.12 (5) Å3
Mr = 336.26Z = 2
Monoclinic, P21Mo Kα radiation
a = 5.1524 (2) ŵ = 0.15 mm1
b = 11.1467 (4) ÅT = 90 K
c = 12.4478 (5) Å0.28 × 0.10 × 0.08 mm
β = 99.967 (4)°
Data collection top
Agilent Xcalibur Opal
diffractometer
2876 independent reflections
Absorption correction: multi-scan
[SCALE3 ABSPACK (Blessing, 1995) and CrysAlis PRO (Agilent, 2012)]
2430 reflections with I > 2σ(I)
Tmin = 0.980, Tmax = 1.000Rint = 0.030
17202 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.032H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.065Δρmax = 0.17 e Å3
S = 1.01Δρmin = 0.17 e Å3
2876 reflectionsAbsolute structure: Flack (1983), 1367 Friedel pairs
217 parametersAbsolute structure parameter: 0.4 (9)
5 restraints
Special details top

Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > 2σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
C10.4625 (4)0.52285 (19)0.52693 (16)0.0118 (4)
C20.2932 (4)0.63226 (18)0.49184 (14)0.0116 (4)
H20.39310.70530.51500.014*
C30.0458 (4)0.62912 (19)0.54164 (15)0.0130 (4)
H3A0.05910.56020.51330.016*
H3B0.09440.61920.62000.016*
C40.0979 (4)0.39834 (17)0.75125 (15)0.0090 (4)
C50.3329 (4)0.30988 (18)0.76828 (15)0.0091 (4)
C110.9862 (4)0.69260 (18)1.00499 (16)0.0110 (4)
C120.7188 (4)0.63044 (18)0.98188 (14)0.0099 (4)
H120.58750.68451.00390.012*
C130.7174 (4)0.51374 (18)1.04585 (16)0.0127 (4)
H13A0.83540.45651.02070.015*
H13B0.78100.52901.12260.015*
N10.2229 (3)0.62971 (16)0.37022 (12)0.0123 (4)
H1A0.13720.56200.34930.015*
H1B0.36920.63340.34140.015*
H1C0.12040.69220.34750.015*
N20.6468 (3)0.60909 (15)0.86212 (12)0.0111 (4)
H2A0.49740.56740.84830.013*
H2B0.77470.56790.83910.013*
H2C0.62530.67920.82740.013*
O10.5153 (3)0.44889 (13)0.46302 (11)0.0160 (3)
O20.5432 (3)0.51993 (13)0.63342 (10)0.0136 (3)
H2D0.65410.46700.64850.020*
O30.1098 (3)0.73504 (12)0.51957 (10)0.0145 (3)
H30.16080.74120.45370.022*
O40.3329 (3)0.22639 (12)0.70100 (10)0.0127 (3)
O50.5089 (3)0.32894 (12)0.85114 (10)0.0118 (3)
O60.0945 (3)0.36793 (12)0.67897 (10)0.0113 (3)
O70.1134 (3)0.49023 (12)0.80848 (11)0.0131 (3)
O90.9872 (3)0.40357 (13)0.31699 (11)0.0172 (3)
O80.4472 (3)0.34223 (13)0.22167 (11)0.0154 (3)
O111.0996 (3)0.72817 (12)0.93378 (11)0.0139 (3)
O121.0685 (3)0.70526 (12)1.11088 (10)0.0134 (3)
H12A1.20310.74601.12130.020*
O130.4594 (3)0.46436 (13)1.03248 (11)0.0151 (3)
H130.43260.42310.97710.023*
H9A0.8281 (17)0.388 (2)0.2924 (17)0.023*
H9B1.028 (4)0.3640 (18)0.3750 (11)0.023*
H8A0.316 (3)0.365 (2)0.2477 (18)0.023*
H8B0.428 (5)0.3845 (18)0.1648 (12)0.023*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
C10.0076 (10)0.0142 (11)0.0139 (11)0.0019 (9)0.0027 (8)0.0010 (9)
C20.0106 (11)0.0128 (10)0.0109 (10)0.0007 (9)0.0004 (8)0.0002 (9)
C30.0132 (11)0.0128 (10)0.0129 (10)0.0019 (9)0.0021 (9)0.0006 (9)
C40.0111 (11)0.0082 (10)0.0078 (10)0.0013 (9)0.0025 (8)0.0036 (8)
C50.0070 (10)0.0105 (10)0.0105 (10)0.0028 (8)0.0036 (8)0.0029 (8)
C110.0113 (10)0.0064 (10)0.0148 (10)0.0020 (8)0.0004 (8)0.0018 (8)
C120.0104 (10)0.0133 (10)0.0057 (9)0.0009 (8)0.0011 (8)0.0010 (8)
C130.0118 (11)0.0136 (11)0.0117 (10)0.0039 (9)0.0008 (8)0.0014 (8)
N10.0112 (9)0.0135 (9)0.0121 (8)0.0019 (7)0.0018 (7)0.0036 (7)
N20.0125 (9)0.0099 (9)0.0100 (8)0.0020 (7)0.0001 (7)0.0008 (7)
O10.0159 (8)0.0155 (8)0.0149 (8)0.0046 (7)0.0022 (6)0.0025 (6)
O20.0128 (8)0.0165 (8)0.0107 (8)0.0072 (6)0.0002 (6)0.0024 (6)
O30.0160 (8)0.0160 (8)0.0108 (7)0.0071 (6)0.0003 (6)0.0004 (6)
O40.0137 (7)0.0114 (7)0.0126 (7)0.0015 (6)0.0013 (6)0.0042 (6)
O50.0094 (7)0.0144 (8)0.0107 (7)0.0015 (6)0.0009 (6)0.0009 (6)
O60.0114 (7)0.0102 (7)0.0107 (7)0.0012 (6)0.0023 (6)0.0009 (5)
O70.0119 (7)0.0123 (8)0.0143 (7)0.0014 (6)0.0004 (6)0.0034 (6)
O90.0154 (8)0.0188 (9)0.0160 (8)0.0037 (7)0.0017 (7)0.0029 (7)
O80.0183 (8)0.0149 (8)0.0137 (8)0.0000 (7)0.0051 (7)0.0014 (6)
O110.0138 (7)0.0161 (7)0.0124 (7)0.0030 (6)0.0036 (6)0.0001 (6)
O120.0092 (7)0.0192 (8)0.0117 (7)0.0074 (6)0.0013 (5)0.0038 (6)
O130.0171 (8)0.0161 (8)0.0113 (7)0.0083 (6)0.0004 (6)0.0023 (6)
Geometric parameters (Å, º) top
C1—O11.209 (2)C12—H120.9800
C1—O21.319 (2)C13—O131.422 (2)
C1—C21.519 (3)C13—H13A0.9700
C2—N11.495 (2)C13—H13B0.9700
C2—C31.511 (3)N1—H1A0.8900
C2—H20.9800N1—H1B0.8900
C3—O31.427 (2)N1—H1C0.8900
C3—H3A0.9700N2—H2A0.8900
C3—H3B0.9700N2—H2B0.8900
C4—O71.242 (2)N2—H2C0.8900
C4—O61.264 (2)O2—H2D0.8200
C4—C51.547 (3)O3—H30.8200
C5—O41.252 (2)O9—H9A0.843 (5)
C5—O51.268 (2)O9—H9B0.841 (5)
C11—O111.210 (2)O8—H8A0.838 (5)
C11—O121.321 (2)O8—H8B0.842 (5)
C11—C121.524 (3)O12—H12A0.8200
C12—N21.492 (2)O13—H130.8200
C12—C131.526 (3)
O1—C1—O2125.23 (19)N2—C12—H12108.2
O1—C1—C2122.80 (17)C11—C12—H12108.2
O2—C1—C2111.96 (17)C13—C12—H12108.2
N1—C2—C3109.96 (16)O13—C13—C12110.96 (16)
N1—C2—C1107.60 (15)O13—C13—H13A109.4
C3—C2—C1110.29 (17)C12—C13—H13A109.4
N1—C2—H2109.7O13—C13—H13B109.4
C3—C2—H2109.7C12—C13—H13B109.4
C1—C2—H2109.7H13A—C13—H13B108.0
O3—C3—C2112.81 (17)C2—N1—H1A109.5
O3—C3—H3A109.0C2—N1—H1B109.5
C2—C3—H3A109.0H1A—N1—H1B109.5
O3—C3—H3B109.0C2—N1—H1C109.5
C2—C3—H3B109.0H1A—N1—H1C109.5
H3A—C3—H3B107.8H1B—N1—H1C109.5
O7—C4—O6126.43 (19)C12—N2—H2A109.5
O7—C4—C5118.41 (16)C12—N2—H2B109.5
O6—C4—C5115.16 (16)H2A—N2—H2B109.5
O4—C5—O5125.86 (18)C12—N2—H2C109.5
O4—C5—C4118.22 (16)H2A—N2—H2C109.5
O5—C5—C4115.92 (16)H2B—N2—H2C109.5
O11—C11—O12125.74 (19)C1—O2—H2D109.5
O11—C11—C12123.09 (18)C3—O3—H3109.5
O12—C11—C12111.14 (16)H9A—O9—H9B107 (2)
N2—C12—C11108.76 (15)H8A—O8—H8B100 (2)
N2—C12—C13111.26 (16)C11—O12—H12A109.5
C11—C12—C13112.01 (16)C13—O13—H13109.5
O1—C1—C2—N12.1 (3)O7—C4—C5—O510.2 (2)
O2—C1—C2—N1177.53 (16)O6—C4—C5—O5169.46 (16)
O1—C1—C2—C3117.8 (2)O11—C11—C12—N27.0 (3)
O2—C1—C2—C362.5 (2)O12—C11—C12—N2175.16 (15)
N1—C2—C3—O366.8 (2)O11—C11—C12—C13130.4 (2)
C1—C2—C3—O3174.68 (15)O12—C11—C12—C1351.8 (2)
O7—C4—C5—O4170.34 (17)N2—C12—C13—O1364.5 (2)
O6—C4—C5—O410.0 (2)C11—C12—C13—O13173.51 (15)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1A···O9i0.891.942.826 (2)172
N1—H1B···O4ii0.892.002.809 (2)151
N1—H1C···O6iii0.891.992.779 (2)148
N1—H1C···O4iii0.892.343.044 (2)136
N2—H2A···O70.892.143.020 (2)172
N2—H2A···O50.892.663.200 (2)120
N2—H2B···O7iv0.892.042.922 (2)169
N2—H2C···O8ii0.891.932.811 (2)168
O2—H2D···O6iv0.821.692.5122 (19)175
O3—H3···O4iii0.821.982.7887 (18)168
O8—H8A···O9i0.84 (1)2.08 (1)2.910 (2)174 (2)
O8—H8B···O13v0.84 (1)1.90 (1)2.730 (2)167 (2)
O9—H9A···O80.84 (1)2.07 (1)2.911 (2)175 (2)
O9—H9B···O3vi0.84 (1)1.94 (1)2.7607 (19)164 (2)
O12—H12A···O5vii0.821.732.5513 (19)177
O13—H13···O50.821.982.7637 (19)159
O13—H13···O70.822.553.0521 (19)121
Symmetry codes: (i) x1, y, z; (ii) x+1, y+1/2, z+1; (iii) x, y+1/2, z+1; (iv) x+1, y, z; (v) x, y, z1; (vi) x+1, y1/2, z+1; (vii) x+2, y+1/2, z+2.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N1—H1A···O9i0.891.942.826 (2)172.3
N1—H1B···O4ii0.892.002.809 (2)150.9
N1—H1C···O6iii0.891.992.779 (2)147.5
N1—H1C···O4iii0.892.343.044 (2)136.1
N2—H2A···O70.892.143.020 (2)172.2
N2—H2A···O50.892.663.200 (2)120.2
N2—H2B···O7iv0.892.042.922 (2)169.4
N2—H2C···O8ii0.891.932.811 (2)168.4
O2—H2D···O6iv0.821.692.5122 (19)174.5
O3—H3···O4iii0.821.982.7887 (18)167.7
O8—H8A···O9i0.838 (5)2.075 (6)2.910 (2)174 (2)
O8—H8B···O13v0.842 (5)1.903 (8)2.730 (2)167 (2)
O9—H9A···O80.843 (5)2.070 (6)2.911 (2)175 (2)
O9—H9B···O3vi0.841 (5)1.943 (8)2.7607 (19)164 (2)
O12—H12A···O5vii0.821.732.5513 (19)177.4
O13—H13···O50.821.982.7637 (19)159.1
O13—H13···O70.822.553.0521 (19)121.2
Symmetry codes: (i) x1, y, z; (ii) x+1, y+1/2, z+1; (iii) x, y+1/2, z+1; (iv) x+1, y, z; (v) x, y, z1; (vi) x+1, y1/2, z+1; (vii) x+2, y+1/2, z+2.
 

Acknowledgements

The authors acknowledge support from Foundation for Polish Science Team project (TEAM/2009–3/8) co-financed by European Regional Development Fund operated within Innovative Economy Operational Programme.

References

First citationAgilent (2012). CrysAlis PRO. Agilent Technologies, Yarnton, Oxfordshire, England.  Google Scholar
First citationBlessing, R. H. (1995). Acta Cryst. A51, 33–38.  CrossRef CAS Web of Science IUCr Journals Google Scholar
First citationBraga, D., Chelazzi, L., Ciabatti, I. & Grepioni, F. (2013). New J. Chem. 37, 97–104.  Web of Science CSD CrossRef CAS Google Scholar
First citationBrandenburg, K. (1999). DIAMOND. Crystal Impact GbR, Bonn, Germany.  Google Scholar
First citationFarrugia, L. J. (2012). J. Appl. Cryst. 45, 849–854.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSheldrick, G. M. (2008). Acta Cryst. A64, 112–122.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Volume 69| Part 11| November 2013| Pages o1667-o1668
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds