research communications\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoSTRUCTURAL BIOLOGY
COMMUNICATIONS
ISSN: 2053-230X

The crystal structure of DynF from the dynemicin-biosynthesis pathway of Micromonospora chersina

crossmark logo

aDepartment of Biosciences, Rice University, Houston, TX 77251, USA, bDepartment of Pharmaceutical Sciences, College of Pharmacy, University of Kentucky, Lexington, KY 40506, USA, cCenter for Pharmaceutical Research and Innovation, College of Pharmacy, University of Kentucky, Lexington, KY 40506, USA, and dDepartment of Chemistry, Rice University, Houston, TX 77251, USA
*Correspondence e-mail: georgep@rice.edu

Edited by F. T. Tsai, Baylor College of Medicine, Houston, USA (Received 15 September 2021; accepted 21 November 2021)

Dynemicin is an enediyne natural product from Micromonospora chersina ATCC53710. Access to the biosynthetic gene cluster of dynemicin has enabled the in vitro study of gene products within the cluster to decipher their roles in assembling this unique molecule. This paper reports the crystal structure of DynF, the gene product of one of the genes within the biosynthetic gene cluster of dynemicin. DynF is revealed to be a dimeric eight-stranded β-barrel structure with palmitic acid bound within a cavity. The presence of palmitic acid suggests that DynF may be involved in binding the precursor polyene heptaene, which is central to the synthesis of the ten-membered ring of the enediyne core.

1. Introduction

Dynemicin A is an anthraquinone-fused ten-membered enediyne and a metabolite of Micromonospora chersina ATCC53710. Like many other enediynes, dynemicin has a novel molecular architecture, a notable mode of action and potent cytotoxicity (Thorson et al., 2000[Thorson, J., Sievers, E., Ahlert, J., Shepard, E., Whitwam, R., Onwueme, K. & Ruppen, M. (2000). Curr. Pharm. Des. 6, 1841-1879.]; Van Lanen & Shen, 2008[Van Lanen, S. & Shen, B. (2008). Curr. Top. Med. Chem. 8, 448-459.]). Dynemicin comprises an enediyne core, which is common to all enediynes, and peripheral moieties (Fig. 1[link]), which give the enediynes structural diversity. The main ring of the dynemicin core contains two acetylenic groups conjugated to a double bond in a ten-membered carbocyle. The enediyne core structural unit (termed the warhead) is central to the fundamental mechanism of action. The anthraquinone group on the peripheral moeity of dynemicin intercalates into the minor groove of DNA to confer binding specificity (Sugiura et al., 1990[Sugiura, Y., Shiraki, T., Konishi, M. & Oki, T. (1990). Proc. Natl Acad. Sci. USA, 87, 3831-3835.]).

[Figure 1]
Figure 1
Dynemicin A has a unique molecular architecture comprising an enediyne core (red) and peripheral moieties (black). The enediyne core is the key to the cytotoxicity of dynemicin.

In the presence of NADPH or thiol, the quinone is reduced to hydroquinone, leading to opening of the epoxide (Avendaño & Menéndez, 2015[Avendaño, C. & Menéndez, J. C. (2015). Medicinal Chemistry of Anticancer Drugs, 2nd ed, pp. 133-195. Amsterdam: Elsevier.]), which triggers the activation of the enediyne core. Dynemicin then undergoes a Bergman cycloaromatization to form a reactive 1,4-dehydrobenzene bi­radical that is capable of abstracting H atoms from the DNA backbone, causing single- or double-stranded DNA scission. The high reactivity of enediynes with DNA makes them quite toxic. In natural environments, some microorganisms producing enediynes protect themselves from their cytotoxic action by a self-resistance mechanism that uses a self-sacrificing protein (Biggins et al., 2003[Biggins, J., Onwueme, K. C. & Thorson, J. S. (2003). Science, 301, 1537-1541.]; Elshahawi et al., 2014[Elshahawi, S. I., Ramelot, T. A., Seetharaman, J., Chen, J., Singh, S., Yang, Y., Pederson, K., Kharel, M. K., Xiao, R., Lew, S., Yennamalli, R. M., Miller, M. D., Wang, F., Tong, L., Montelione, G. T., Kennedy, M. A., Bingman, C. A., Zhu, H., Phillips, G. N. Jr & Thorson, J. S. (2014). ACS Chem. Biol. 9, 2347-2358.]) or specialized ABC transporters to export the toxin (Beis & Rebuffat, 2019[Beis, K. & Rebuffat, S. (2019). Res. Microbiol. 170, 399-406.]). In cancer therapy, the toxicity of enediynes has been exploited by conjugating the molecules to tumor-specific monoclonal antibodies in polymer-assisted delivery systems to prevent premature cytotoxic effects on other important cells in the body (Abe & Otsuki, 2002[Abe, S. & Otsuki, M. (2002). Curr. Med. Chem. Anticancer Agents, 2, 715-726.]; Shah, 2017[Shah, N. (2017). Curr. Drug Targets, 18, 257-270.]).

Dynemicin can be produced by organic synthesis or in M. chersina. The total chemical synthesis of enediynes is challenging, but has been achieved for dynemicin (Nicolaou et al., 1991[Nicolaou, K., Smith, A., Wendeborn, S. & Hwang, C. (1991). J. Am. Chem. Soc. 113, 3106-3114.], 1993[Nicolaou, K., Hummel, C., Nakada, M., Shibayama, K., Pitsinos, E., Saimoto, H., Mizuno, Y., Baldenius, K. & Smith, A. (1993). J. Am. Chem. Soc. 115, 7625-7635.]; Shair et al., 1996[Shair, M., Yoon, T., Mosny, K., Chou, T. & Danishefsky, S. (1996). J. Am. Chem. Soc. 118, 9509-9525.]; Myers et al., 1995[Myers, A., Fraley, M., Tom, N., Cohen, S. & Madar, D. (1995). Chem. Biol. 2, 33-43.]). The cloning, sequencing and identification of the biosynthetic gene clusters of dynemicin has paved the way for in vitro studies of these biosynthetic enzymes (Gao & Thorson, 2008[Gao, Q. & Thorson, J. (2008). FEMS Microb. Lett. 282, 105-114.]). The putative biosynthesis of dynemicin is correspondingly complex: the M. chersina whole genome sequence analysis revealed 60 open reading frames (ORFs) within the biosynthetic gene cluster related to dynemicin production. Using homology to other characterized genomes, these genes have been annotated to suggest functions such as biosynthesis of the enediyne core, maturation and regulation, while there are also those with as yet unknown functions (Gao & Thorson, 2008[Gao, Q. & Thorson, J. (2008). FEMS Microb. Lett. 282, 105-114.]). The gene cluster contains a common iterative type I polyketide synthase (PKSE) that is essential for the biosynthesis of a precursor polyene (heptaene) which, in the presence of other accessory enzymes, forms the ten-membered enediyne core of dynemicin (Liu et al., 2003[Liu, W., Ahlert, J., Gao, Q., Wendt-Pienkowski, E., Shen, B. & Thorson, J. S. (2003). Proc. Natl Acad. Sci. USA, 100, 11959-11963.]). Evidence has accumulated that the PKSE product is also the precursor of the anthraquinone, and the biosynthesis of this moiety proceeds through a δ-thiolactone iodoanthracene intermediate (Cohen & Townsend, 2018[Cohen, D. & Townsend, C. (2018). Angew. Chem. 130, 5752-5756.]). While some insight into the conversion of the iodo­anthracene to the anthraquinone has recently been reported upon examination of the biosynthesis of sungeidines (Ma et al., 2021[Ma, G., Tran, H., Low, Z., Candra, H., Pang, L., Cheang, Q., Fang, M. & Liang, Z. (2021). J. Am. Chem. Soc. 143, 11500-11509.]), which, like dynemicin, are anthraquinone-fused ten-membered enediynes, the steps leading to the iodoanthracene in addition to the enediyne core remain mostly unknown.

This study targets one of several proteins of unknown function encoded by a gene within the biosynthetic gene cluster of dynemicin, herein named DynF. The gene encoding DynF was originally annotated orf15 (Gao & Thorson, 2008[Gao, Q. & Thorson, J. (2008). FEMS Microb. Lett. 282, 105-114.]) and was deposited as ORF18 with unknown function (GenBank accession No. ACB47058.1). The DynF ortholog Sgd15 was very recently demonstrated by gene inactivation to be essential for sungeidine biosynthesis, and no intermediates, including the iodoanthracene, were detected (Ma et al., 2021[Ma, G., Tran, H., Low, Z., Candra, H., Pang, L., Cheang, Q., Fang, M. & Liang, Z. (2021). J. Am. Chem. Soc. 143, 11500-11509.]), suggesting that DynF and Sgd15 are involved in the early steps of processing the PKSE product to either the enediyne core or iodoanthracene, or potentially both. Here, we report the structural characterization of DynF using X-ray crystallo­graphy as an initial step towards deciphering its role in the biosynthesis of this unique anthraquinone-fused enediyne.

2. Materials and methods

2.1. Macromolecule production

A construct for DynF from M. chersina ATCC53710 with a cleavable 6×His expression and purification tag on the N-terminus was codon-optimized for production in Escherichia coli. It was ordered as a synthetic gBlock from Integrated DNA Technologies (IDT, Coralville, Iowa, USA). Amplification of the gene was performed by polymerase chain reaction (PCR) using Q5 High-Fidelity 2× Master Mix (NEB, Westwood, Massachusetts, USA). Gibson assembly was used to clone the gene into a pNIC28-Bsa4 vector (Savitsky et al., 2010[Savitsky, P., Bray, J., Cooper, C. D. O., Marsden, B. D., Mahajan, P., Burgess-Brown, N. A. & Gileadi, O. (2010). J. Struct. Biol. 172, 3-13.]; Addgene, Watertown, Masachusetts, USA). It was then transformed into DH5α competent E. coli cells (Invitrogen, Carlsbad, California, USA). Sanger sequencing (Genewiz, South Plainfield, New Jersey, USA) was used to verify the sequence of the construct.

The DynF_pNIC28-Bsa4 plasmid was transformed into competent E. coli BL21 (DE3) expression cells (Agilent Technologies, Cedar Creek, Texas, USA). 5 µl of the transformed cells were then grown overnight on Luria–Bertani (LB) agar plates containing 50 µg ml−1 kanamycin antibiotic. From a single colony, a seed culture of 50 ml was grown in LB medium supplemented with 50 µg ml−1 kanamycin to select for expression in the cells. DynF was expressed in BL21 (DE3) competent E. coli cells and was most soluble when induced with 0.5 mM isopropyl β-D-1-thiogalactopyranoside (IPTG) and cultured at 291 K after induction. To obtain suitable quantities of DynF protein for crystallization experiments, 1 l culture was grown from a 50 ml overnight seed culture until an OD600 of ∼0.6–0.8 was reached. The cells were then induced with 0.5 mM IPTG and cultured at 291 K for 17 h. These cells were harvested by centrifugation at 5000 rev min−1 for 40 min.

The cell pellet was resuspended using a lysis buffer consisting of 10% glycerol, 20 mM imidazole, 50 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) pH 8.0, 500 mM NaCl, 1 mM tris(2-carboxyethyl)phosphine hydrochloride (TCEP). The cells were then lysed by sonication for 4 min 30 s pulse on and 2 min pulse off with 50% amplitude (Qsonica Q700 sonicator, Newton, Connecticut, USA). The lysed cells were centrifuged at 20 000 rev min−1 for 45 min. Immobilized metal-affinity chromatography (IMAC) with Ni–NTA resin (Qiagen, Hilden, Germany) was used to purify the protein. The protein was eluted from the nickel column using a buffer consisting of 10% glycerol, 500 mM imidazole, 25 mM HEPES pH 8.0, 500 mM NaCl, 1 mM TCEP. Sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE) was used to confirm the production of DynF protein with an expected size of 22.6 kDa. The protein was concentrated and buffer-exchanged into Tobacco etch virus (TEV) protease buffer (25 mM Tris pH 8.0, 150 mM NaCl, 1 mM DTT) using an Amicon ultracentrifugal filter (10 000 molecular-weight cutoff, Merck KGaA, Darmstadt, Germany). The protein concentration was obtained using a UV–Vis spectrophotometer with an extinction coefficient of 1.191, and was confirmed using a NanoDrop. The histidine tag at the N-terminus of the DynF protein was cleaved from the protein using His-tagged TEV protease. Subtractive nickel column purification was performed to remove the uncleaved protein and protease. DynF was run on a size-calibrated HiLoad 16/600 Superdex 200 pg (GE Healthcare, Uppsala, Sweden) size-exclusion column (SEC) to further purify it and analyze its oligomeric state (Supplementary Fig. S1). Macromolecule-production information is summarized in Table 1[link].

Table 1
Macromolecule-production information

Source organism Micromonospora chersina
DNA source E. coli codon-optimized synthesis (gBlock) from Genewiz
Insert forward primer 5′-agaacctgtacttccaatccATGTCGACTAAATCTGTATT-3′
Insert reverse primer 5′-ACCAGACCAGATGTGAacggtctccagtaaaggtgg-3′
Vector forward primer 5′-TTAAACCAGACCAGATGTGAacggtctccagtaaaggtg-3′
Vector reverse primer 5′-agaacctgtacttccaatccATGTCGACTAAATCTGTATT-3′
Expression vector pNIC28-Bsa4
Expression host Escherichia coli BL21 (DE3)
Complete amino-acid sequence of the construct produced§ mgsshhhhhhenlyfq/sMSTKSVLFGRPVQTEGVPNVYAGAPVVPWTPPEPGIDNLGINSIDTFAVPGVGEYTVAFDGWVRVVRSPSTSGEWADAEVYTNLIEMKMVGECEELGKITVTLNPDCLSAGQIRTPFDPYAGEGPSAKACRMAVGAIFDMPKLGLKLMNREPIILTIDDVRSIPPAGAPGKGQIYRMMPLLDVNDPDGQPVAYLTSLRFNMGGYLKPDQM
†The primers contained overhangs for cloning, which are represented as lower case letters.
‡Plasmid pNIC28-Bsa4 was a gift from Opher Gileadi (Addgene plasmid #26103).
§The expression and purification tag is shown in lower case with the TEV recognition site underlined and the cut site indicated with a slash.

2.2. Crystallization

DynF was concentrated to 20 mg ml−1 and subjected to high-throughput crystallization screening. A Mosquito LCP robot (SPT Labtech) was used with commercially available screens, including Wizard 1 and 2 and Wizard 3 and 4 (Rikagu Reagents, Bainbridge Island, Washington, USA), PEGRx and Crystal Screen HT (Hampton Research, Aliso Viejo, California, USA). Screens were set up via the sitting-drop vapor-diffusion method in MRC 2 96-well crystallization plates (Hampton Research, Aliso Viejo, California, USA) with drops consisting of 200 nl protein solution (20 mg ml−1) mixed with 200 nl reservoir solution. Initial crystal hits (Fig. 2[link]a) were observed in two wells of the Wizard 3 and 4 crystallization screen [C1, 10%(w/v) PEG 1000, 10%(w/v) PEG 8000; F10, 25%(w/v) PEG 1500, 0.1 M PCB buffer pH 7.0]. Optimization for larger crystals from well F10 of the Wizard 3 and 4 crystallization screen was achieved by increasing the protein:precipitant ratio (300:200 nl) in the initial drop (Fig. 2[link]b). Potassium iodide (KI) derivatives were prepared by soaking native DynF crystals for 30 s in 0.5 mM KI dissolved in the reservoir solution. Native and KI-soaked crystals were looped using Mounted CryoLoops (Hampton Research, Aliso Viejo, California, USA), cryocooled in liquid nitrogen and shipped to the Advanced Photon Source synchrotron facility at Argonne National Laboratory. Crystallization information is summarized in Table 2[link].

Table 2
Crystallization

Method Vapor diffusion, sitting drop
Plate type MRC 2 (96-well crystallization plate)
Temperature (K) 293
Protein concentration (mg ml−1) 20
Buffer composition of protein solution (crystallization buffer) 0.025 M Tris pH 8.0, 0.15 M NaCl, 1 mM DTT
Composition of reservoir solution 25%(w/v) PEG 1500, 0.1 M PCB buffer pH 7.0
Volume and ratio of drop 300 nl (1.5:1)
Volume of reservoir (µl) 50 
†The initial screening for crystals was performed using a 1:1 ratio of protein to reservoir solution.
[Figure 2]
Figure 2
DynF crystals as viewed under an Olympus BHTP polarizing microscope equipped with an Olympus OM-D E-M5 digital camera. (a) Initial crystal hits observed at a 1:1 ratio of protein to precipitant. (b) Larger crystals were obtained by increasing the amount of protein in the crystallization wells.

2.3. Data collection and processing

X-ray diffraction data were collected remotely at wavelengths of 1.0332 and 1.823 Å for the native crystals and the heavy-atom derivative crystals, respectively. The native and iodide-soaked crystals diffracted to resolutions of 1.55 and 2.38 Å, respectively. The DynF diffraction data were indexed in the orthorhombic space group C2221, with unit-cell parameters a = 60, b = 65, c = 131 Å. The diffraction data were integrated and scaled using XDS (Kabsch, 2010a[Kabsch, W. (2010a). Acta Cryst. D66, 125-132.],b[Kabsch, W. (2010b). Acta Cryst. D66, 133-144.]). Data-collection and processing statistics are summarized in Table 3[link].

Table 3
Data collection and processing

Values in parentheses are for the outer shell.

  Native KI soaked
Diffraction source Beamline 23-ID-B, APS Beamline 23-ID-B, APS
Wavelength (Å) 1.0332 1.8233
Temperature (K) 100 100
Detector Dectris EIGER X 16M Dectris EIGER X 16M
Crystal-to-detector distance (mm) 219.1 199.4
Rotation range per image (°) 0.2 0.2
Total rotation range (°) 180 360
Exposure time per image (s) 0.2 0.2
Space group C2221 C2221
a, b, c (Å) 59.83, 116.13, 129.88 59.93, 116.08, 131.03
Mosaicity (°) 0.14 0.15
Resolution range (Å) 34.7–1.50 (1.59–1.50) 49.3–2.38 (2.53–2.40)
Total No. of reflections 440004 (21559) 198086 (8709)
No. of unique reflections 70922 (5926) 17513 (1990)
Completeness (%) 97.6 (87.1) 93.7 (66.8)
Multiplicity 6.2 (3.9) 11.3 (4.4)
I/σ(I)〉 14.1 (0.63) 14.1 (1.8)
Rmeas 0.061 (1.90) 0.120 (0.47)
CC1/2 1.00 (0.37) 0.998 (0.88)
Overall B factor from Wilson plot (Å2) 32 50
†〈I/σ(I)〉 falls below 2.0 at 1.67 Å resolution.
‡〈I/σ(I)〉 falls below 2.0 at 2.47 Å resolution.

2.4. Structure solution and refinement

The SAD (single-wavelength anomalous diffraction) and SIRAS (single isomorphous replacement with anomalous scattering) methods were used to phase the structure of DynF. Scaling, substructure solution and phasing were accomplished with SHELXC/D/E (Sheldrick, 2010[Sheldrick, G. M. (2010). Acta Cryst. D66, 479-485.]) using the HKL2MAP graphical interface (Pape & Schneider, 2004[Pape, T. & Schneider, T. R. (2004). J. Appl. Cryst. 37, 843-844.]). Automated protein tracing with ARP/wARP (Langer et al., 2008[Langer, G., Cohen, S., Lamzin, V. & Perrakis, A. (2008). Nat. Protoc. 3, 1171-1179.]) was used on both the SAD and the SIRAS maps to build 418 of 422 residues.

Refinement and model building were performed using phenix.refine (Afonine et al., 2012[Afonine, P. V., Grosse-Kunstleve, R. W., Echols, N., Headd, J. J., Moriarty, N. W., Mustyakimov, M., Terwilliger, T. C., Urzhumtsev, A., Zwart, P. H. & Adams, P. D. (2012). Acta Cryst. D68, 352-367.]) and Coot (Emsley et al., 2010[Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. (2010). Acta Cryst. D66, 486-501.]). The structure was visualized using a collaborative 3D graphics system (Yennamalli et al., 2014[Yennamalli, R., Arangarasan, R., Bryden, A., Gleicher, M. & Phillips, G. N. Jr (2014). J. Appl. Cryst. 47, 1153-1157.]). The software applications used in this project were compiled and configured by SBGrid (Morin et al., 2013[Morin, A., Eisenbraun, B., Key, J., Sanschagrin, P., Timony, M., Ottaviano, M. & Sliz, P. (2013). eLife, 2, e01456.]). The structure of DynF and its corresponding diffraction data have been deposited in the worldwide Protein Data Bank (wwPDB; Berman et al., 2003[Berman, H. M., Henrick, K. & Nakamura, H. (2003). Nat. Struct. Mol. Biol. 10, 980.]) as entry 6ubl. Refinement statistics are summarized in Table 4[link].

Table 4
Structure solution and refinement

Values in parentheses are for the outer shell.

PDB entry 6ubl
Resolution range (Å) 34.7–1.50 (1.52–1.50)
Completeness (%) 97.3
No. of reflections, working set 70715 (2000)
No. of reflections, test set 3518 (117)
Final Rwork 0.161 (0.405)
Final Rfree 0.185 (0.362)
No. of non-H atoms
 Protein 3287
 Ligand 3
 Solvent 422
 Total 374
Ligand RSC
 Palmitic acid A 0.94
 Palmitic acid B 0.91
R.m.s. deviations
 Bonds (Å) 0.007
 Angles (°) 1.0
Average B factors (Å2) 32
 Protein 31
 Ligand 46
 Water 41
Ramachandran plot
 Most favored (%) 99.3
 Allowed outliers (%) 0.0

2.5. Ligand determination using gas chromatography–mass spectrometry (GC-MS)

Acetonitrile (0.5 ml) was added to 0.5 ml purified DynF protein (40 mg ml−1) and rotated at room temperature for 2 h. The mixture was centrifuged using a protein concentrator (3000 molecular-weight cutoff; Millipore, Cork, Ireland) at 4000 rev min−1 for 20 min, and the acetonitrile extract (100 µl) was filtered to remove any remaining insoluble debris. Gas chromatography–mass spectrometry (GC-MS) analysis was performed using an Agilent 7890 GC with a 30 m × 250 µm × 0.25 mm HP-5ms UI capillary column and an Agilent G7081B MSD. Helium was the carrier gas at a flow rate of 1 ml min−1. The temperatures of the injector, the interface and the liner were 523 K. Injections of 5 µl were performed in splitless mode. The column temperature was initially 343 K and was held for 2 min, increased to 513 K at 277 K min−1 and run for a total run time of 59.5 min. For GC–MS detection, an electron-impact ionization system was used. The mass range was set to 50–500 m/z with a filament delay of 4 min. The sample-injection volume was 1 µl.

2.6. Co-expression of DynF with SgcE and DynE7

The genes encoding the C-1027 polyketide synthase SgcE and dynemicin thioesterase DynE7 were cloned into pETDuet using standard procedures. The gene encoding DynF was cloned into pDB.His.MBP. All genes were sequenced to confirm their identity. Both pETDuet and pDB.His.MBP plasmids with the respective genes were co-transformed into E. coli BL21 (DE3) cells. The transformed cells were plated on LB agar supplemented with 50 µg ml−1 kanamycin and 50 µg ml−1 carbenicillin. After overnight incubation at 310 K, a single colony was used to inoculate 5 ml LB medium supplemented with 50 µg ml−1 kanamycin and 50 µg ml−1 carbenicillin. Incubation was performed overnight at 310 K with shaking at 250 rev min−1. The culture (0.5 ml) was transferred into 50 ml fresh LB supplemented with 50 µg ml−1 kanamycin and 50 µg ml−1 carbenicillin and incubated at 291 K and 250 rev min−1. When the optical density at 600 nm reached 0.5–0.6, expression was induced with sterile IPTG solution (final concentration 0.1 mM) and incubated at 291 K and 250 rev min−1 for an additional 36 h. The cells were centrifuged at 4000 rev min−1 at 277 K for 30 min, and the wet pellet was washed once with 30 ml phosphate buffer pH 7.2. The pellet was resuspended in 30 ml phosphate buffer pH 7.2 and sonicated for 2 min with 10 s pulse on and 50 s pulse off (with 40% amplitude) on ice. The lysate was purified using nickel resin and then with amylose resin to purify the MBP-tagged DynF. The sample was extracted with acetonitrile and analyzed by GC-MS as described above.

3. Results and discussion

The structure of DynF was determined to a resolution of 1.50 Å with a final Rwork and Rfree of 0.16 and 0.19, respectively. The DynF crystal has two molecules in its asymmetric unit (Fig. 3[link]a). An analysis of the crystal contacts with PISA (Krissinel & Henrick, 2007[Krissinel, E. & Henrick, K. (2007). J. Mol. Biol. 372, 774-797.]) predicts that DynF forms a stable dimer. Size-exclusion chromatography (SEC) showed that DynF could exist in a higher oligomeric state in solution (Supplementary Fig. S1).

[Figure 3]
Figure 3
Structure of DynF. (a) A ribbon diagram of the crystal structure of DynF (PDB entry 6ubl) viewed down its noncrystallogaphic twofold axis. The ligand is represented as spheres embedded in the DynF β-barrels. Each protomer of DynF comprises an eight-stranded antiparallel β-barrel connected by loops and two helical segments. Strands 4, 5, 6 and 7 are interrupted by dimerization interactions. This figure was generated in PyMOL (version 2.4.1; Schrödinger). (b) A topology diagram of DynF generated using TopDraw (Bond, 2003[Bond, C. S. (2003). Bioinformatics, 19, 311-312.]) shows that each strand is connected to its next neighbor, as is typical of most eight-stranded antiparallel β-barrel structures. (c) The final 2mFomFc map (contoured at 1 r.m.s.d) in blue with ±3 r.m.s.d. contours of the polder omit map in green/red represented in Coot. The green positive difference density clearly shows the location of the bound ligand (palmitic acid) that was omitted from the model phases for the polder map calculation. (d) The ligand in the DynF structure is surrounded by hydrophobic amino-acid groups, except for residues that interact with the carboxylic group at one end of the palmitic acid. This figure was generated with the FLEV (Flatland Ligand Environment View) tool in Coot.

DynF is comprised of antiparallel β-sheets that are connected by short loops and helical segments to form eight-stranded antiparallel β-barrels (Supplementary Fig. S2). The β-strands of the DynF structure are labeled 1, 2, 3, 4a/4b, 5a/5b, 6a/6b, 7a/7b and 8. Two short helical segments connect β-strands 2/3 and 5b/6a. The topology of DynF shows that each strand is directly linked to its neighbor, which is typical of most topologies of eight-stranded antiparallel β-barrels (Fig. 3[link]b) such as outer membrane proteins, avidins, fatty-acid binding proteins and lysozyme inhibitors (Geerds et al., 2014[Geerds, C., Wohlmann, J., Haas, A. & Niemann, H. H. (2014). Acta Cryst. F70, 866-871.]). Deviating from a canonical eight-stranded, up–down β-barrel (Lalonde et al., 1994[Lalonde, J., Bernlohr, D. & Banaszak, L. (1994). FASEB J. 8, 1240-1247.]), we observed short loops inserted within strands 4, 5, 6 and 7 (Figs. 3[link]a and 3[link]b). Some of the loop residues within strands 6 and 7 are located at the dimer interface and thus may be involved in stabilization of the dimer (Supplementary Fig. S3, Supplementary Tables S1 and S2).

Comparative analysis of protein structures can help to decipher their functions. The DynF structure was compared with other structures in the Protein Data Bank (PDB) using the DALI server (Holm, 2020[Holm, L. (2020). Methods Mol. Biol. 2112, 29-42.]). DynF did not have significant structural similarities to previous structures (Z-score of <10; structural identity of <15%; Supplementary Table S3, Supplementary Fig. S4), suggesting that DynF represents a novel fold, thus lacking precedents for providing a known mechanism.

The electron-density map of DynF revealed an elongated ligand embedded within the β-barrel (Fig. 3[link]c). The size and shape of the ligand, as well as its binding environment, are suggestive of a 16-carbon fatty acid, which was confirmed by gas chromatography–mass spectrometry (GC-MS) as palmitic acid (Supplementary Fig. S5). Palmitic acid is the most abundant fatty acid expressed in E. coli cells (Cronan & Thomas, 2009[Cronan, J. & Thomas, J. (2009). Methods Enzymol. 459, 395-433.]). We hypothesize that the ligand co-purified with the protein. The surface representation of DynF in PyMOL reveals that the binding cavity of the ligand is closed and may thus require the channel within the ligand-binding site to open and close in order to allow the ligand to enter and exit.

The hydrophobicity of the side chains of the residues in the ligand-binding cavity (Fig. 3[link]d) and the presence of palmitic acid suggest that DynF may be involved in the binding or processing of the PKSE product or an early biosynthetic intermediate, which is consistent with the results from the inactivation of sgd15 (Ma et al., 2021[Ma, G., Tran, H., Low, Z., Candra, H., Pang, L., Cheang, Q., Fang, M. & Liang, Z. (2021). J. Am. Chem. Soc. 143, 11500-11509.]). A linear conjugated heptaene has previously been observed upon heterologous co-expression of the genes encoding PKSE and a type II thioesterase in E. coli (Annaval et al., 2017[Annaval, T., Rudolf, J., Chang, C., Lohman, J., Kim, Y., Bigelow, L., Jedrzejczak, R., Babnigg, G., Joachimiak, A., Phillips, G. & Shen, B. (2017). ACS Omega, 2, 5159-5169.]; Smanski et al., 2011[Smanski, M., Yu, Z., Casper, J., Lin, S., Peterson, R., Chen, Y., Wendt-Pienkowski, E., Rajski, S. & Shen, B. (2011). Proc. Natl Acad. Sci. USA, 108, 13498-13503.]), and was hypothesized to potentially serve as the DynF ligand or substrate. To test this, DynF was co-expressed with a C-1027 polyketide synthase, SgcE, and a dynemicin thio­estarase, DynE7. However, GC-MS analysis of the ligand following purification of DynF after co-expression of the three genes gave an identical profile predominantly containing palmitic acid. Thus, the role of DynF has not directly been confirmed. Nonetheless, the structural data now provide insight into its potential role in binding the precursor polyene and provide an opportunity to further explore this role via in vitro assays.

Supporting information


Acknowledgements

This work used research resources provided by the Center of Biomedical Research Excellence (COBRE) in Pharmaceutical Research and Innovation (CPRI; NIH P20 GM130456), the University of Kentucky College of Pharmacy and the National Center for Advancing Translational Sciences (UL1TR000117 and UL1TR001998). This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. GM/CA@APS has been funded by the National Cancer Institute (ACB-12002) and the National Institute of General Medical Sciences (AGM-12006, P30GM138396). This content is solely the responsibility of the authors and does not necessarily represent the official views of the National institutes of Health or the National Science Foundation.

Funding information

This research was funded by National Institutes of Health grant R01 GM115261 (JST and GNP), National Cancer Institute grant R01 CA217255 (JST, SGVL and GNP) and National Science Foundation, BioXFEL Science and Technology Center grant No. 1231306 (GNP).

References

First citationAbe, S. & Otsuki, M. (2002). Curr. Med. Chem. Anticancer Agents, 2, 715–726.  PubMed CAS Google Scholar
First citationAfonine, P. V., Grosse-Kunstleve, R. W., Echols, N., Headd, J. J., Moriarty, N. W., Mustyakimov, M., Terwilliger, T. C., Urzhumtsev, A., Zwart, P. H. & Adams, P. D. (2012). Acta Cryst. D68, 352–367.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationAnnaval, T., Rudolf, J., Chang, C., Lohman, J., Kim, Y., Bigelow, L., Jedrzejczak, R., Babnigg, G., Joachimiak, A., Phillips, G. & Shen, B. (2017). ACS Omega, 2, 5159–5169.  CrossRef CAS PubMed Google Scholar
First citationAvendaño, C. & Menéndez, J. C. (2015). Medicinal Chemistry of Anticancer Drugs, 2nd ed, pp. 133–195. Amsterdam: Elsevier.  Google Scholar
First citationBeis, K. & Rebuffat, S. (2019). Res. Microbiol. 170, 399–406.  CrossRef CAS PubMed Google Scholar
First citationBerman, H. M., Henrick, K. & Nakamura, H. (2003). Nat. Struct. Mol. Biol. 10, 980.  Web of Science CrossRef Google Scholar
First citationBiggins, J., Onwueme, K. C. & Thorson, J. S. (2003). Science, 301, 1537–1541.  CrossRef PubMed CAS Google Scholar
First citationBond, C. S. (2003). Bioinformatics, 19, 311–312.  Web of Science CrossRef PubMed CAS Google Scholar
First citationCohen, D. & Townsend, C. (2018). Angew. Chem. 130, 5752–5756.  CrossRef Google Scholar
First citationCronan, J. & Thomas, J. (2009). Methods Enzymol. 459, 395–433.  CrossRef PubMed CAS Google Scholar
First citationElshahawi, S. I., Ramelot, T. A., Seetharaman, J., Chen, J., Singh, S., Yang, Y., Pederson, K., Kharel, M. K., Xiao, R., Lew, S., Yennamalli, R. M., Miller, M. D., Wang, F., Tong, L., Montelione, G. T., Kennedy, M. A., Bingman, C. A., Zhu, H., Phillips, G. N. Jr & Thorson, J. S. (2014). ACS Chem. Biol. 9, 2347–2358.  Web of Science CrossRef CAS PubMed Google Scholar
First citationEmsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. (2010). Acta Cryst. D66, 486–501.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationGao, Q. & Thorson, J. (2008). FEMS Microb. Lett. 282, 105–114.  CrossRef CAS Google Scholar
First citationGeerds, C., Wohlmann, J., Haas, A. & Niemann, H. H. (2014). Acta Cryst. F70, 866–871.  Web of Science CrossRef IUCr Journals Google Scholar
First citationHolm, L. (2020). Methods Mol. Biol. 2112, 29–42.  CrossRef CAS PubMed Google Scholar
First citationKabsch, W. (2010a). Acta Cryst. D66, 125–132.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationKabsch, W. (2010b). Acta Cryst. D66, 133–144.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationKrissinel, E. & Henrick, K. (2007). J. Mol. Biol. 372, 774–797.  Web of Science CrossRef PubMed CAS Google Scholar
First citationLalonde, J., Bernlohr, D. & Banaszak, L. (1994). FASEB J. 8, 1240–1247.  CrossRef CAS PubMed Google Scholar
First citationLanger, G., Cohen, S., Lamzin, V. & Perrakis, A. (2008). Nat. Protoc. 3, 1171–1179.  CrossRef PubMed CAS Google Scholar
First citationLiu, W., Ahlert, J., Gao, Q., Wendt-Pienkowski, E., Shen, B. & Thorson, J. S. (2003). Proc. Natl Acad. Sci. USA, 100, 11959–11963.  Web of Science CrossRef PubMed CAS Google Scholar
First citationMa, G., Tran, H., Low, Z., Candra, H., Pang, L., Cheang, Q., Fang, M. & Liang, Z. (2021). J. Am. Chem. Soc. 143, 11500–11509.  CrossRef CAS PubMed Google Scholar
First citationMorin, A., Eisenbraun, B., Key, J., Sanschagrin, P., Timony, M., Ottaviano, M. & Sliz, P. (2013). eLife, 2, e01456.  CrossRef PubMed Google Scholar
First citationMyers, A., Fraley, M., Tom, N., Cohen, S. & Madar, D. (1995). Chem. Biol. 2, 33–43.  CrossRef CAS PubMed Google Scholar
First citationNicolaou, K., Hummel, C., Nakada, M., Shibayama, K., Pitsinos, E., Saimoto, H., Mizuno, Y., Baldenius, K. & Smith, A. (1993). J. Am. Chem. Soc. 115, 7625–7635.  CrossRef CAS Google Scholar
First citationNicolaou, K., Smith, A., Wendeborn, S. & Hwang, C. (1991). J. Am. Chem. Soc. 113, 3106–3114.  CrossRef CAS Google Scholar
First citationPape, T. & Schneider, T. R. (2004). J. Appl. Cryst. 37, 843–844.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSavitsky, P., Bray, J., Cooper, C. D. O., Marsden, B. D., Mahajan, P., Burgess-Brown, N. A. & Gileadi, O. (2010). J. Struct. Biol. 172, 3–13.  Web of Science CrossRef CAS PubMed Google Scholar
First citationShah, N. (2017). Curr. Drug Targets, 18, 257–270.  CrossRef CAS PubMed Google Scholar
First citationShair, M., Yoon, T., Mosny, K., Chou, T. & Danishefsky, S. (1996). J. Am. Chem. Soc. 118, 9509–9525.  CrossRef CAS Google Scholar
First citationSheldrick, G. M. (2010). Acta Cryst. D66, 479–485.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationSmanski, M., Yu, Z., Casper, J., Lin, S., Peterson, R., Chen, Y., Wendt-Pienkowski, E., Rajski, S. & Shen, B. (2011). Proc. Natl Acad. Sci. USA, 108, 13498–13503.  CrossRef CAS PubMed Google Scholar
First citationSugiura, Y., Shiraki, T., Konishi, M. & Oki, T. (1990). Proc. Natl Acad. Sci. USA, 87, 3831–3835.  CrossRef CAS PubMed Web of Science Google Scholar
First citationThorson, J., Sievers, E., Ahlert, J., Shepard, E., Whitwam, R., Onwueme, K. & Ruppen, M. (2000). Curr. Pharm. Des. 6, 1841–1879.  CrossRef PubMed CAS Google Scholar
First citationVan Lanen, S. & Shen, B. (2008). Curr. Top. Med. Chem. 8, 448–459.  CrossRef PubMed CAS Google Scholar
First citationYennamalli, R., Arangarasan, R., Bryden, A., Gleicher, M. & Phillips, G. N. Jr (2014). J. Appl. Cryst. 47, 1153–1157.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoSTRUCTURAL BIOLOGY
COMMUNICATIONS
ISSN: 2053-230X
Follow Acta Cryst. F
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds