Download citation
Download citation
link to html
The title compound, C17H14O3S, was prepared by alkaline hydrolysis of ethyl 2-(3-methyl­sulfanyl-5-phenyl-1-benzofuran-2-yl)acetate. The phenyl ring is rotated out of the benzofuran plane with a dihedral angle of 44.1 (1)°. The methyl group of the methyl­sulfanyl substituent is almost perpendicular to the plane of the benzofuran fragment [100.4 (2)°] and is slightly tilted towards it. The crystal structure is stabilized by aromatic π–π inter­actions, with a centroid-to-centroid distance of 3.566 (5) Å between furan rings of neighboring mol­ecules, and by inversion-related inter­molecular O—H...O hydrogen bonds between the carboxyl groups.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S1600536807033326/cf2113sup1.cif
Contains datablocks global, I

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S1600536807033326/cf2113Isup2.hkl
Contains datablock I

CCDC reference: 659075

Key indicators

  • Single-crystal X-ray study
  • T = 173 K
  • Mean [sigma](C-C) = 0.005 Å
  • R factor = 0.060
  • wR factor = 0.152
  • Data-to-parameter ratio = 12.3

checkCIF/PLATON results

No syntax errors found



Alert level A PLAT029_ALERT_3_A _diffrn_measured_fraction_theta_full Low ....... 0.92
Author Response: Some high-angle reflections were not correctly measured.

Alert level B SYMMS01_ALERT_1_B The cell setting should be one of the following * triclinic * monoclinic * orthorhombic * tetragonal * rhombohedral * trigonal * hexagonal * cubic Cell setting given = monoclinic' PLAT222_ALERT_3_B Large Non-Solvent H Ueq(max)/Ueq(min) ... 4.58 Ratio
Author Response: High U value for H of OH group.

Alert level C REFLT03_ALERT_3_C Reflection count < 95% complete From the CIF: _diffrn_reflns_theta_max 25.00 From the CIF: _diffrn_reflns_theta_full 25.00 From the CIF: _reflns_number_total 2390 TEST2: Reflns within _diffrn_reflns_theta_max Count of symmetry unique reflns 2586 Completeness (_total/calc) 92.42% PLAT022_ALERT_3_C Ratio Unique / Expected Reflections too Low .... 0.92 PLAT153_ALERT_1_C The su's on the Cell Axes are Equal (x 100000) 200 Ang. PLAT220_ALERT_2_C Large Non-Solvent C Ueq(max)/Ueq(min) ... 2.89 Ratio PLAT340_ALERT_3_C Low Bond Precision on C-C Bonds (x 1000) Ang ... 5
Alert level G PLAT860_ALERT_3_G Note: Number of Least-Squares Restraints ....... 1
1 ALERT level A = In general: serious problem 2 ALERT level B = Potentially serious problem 5 ALERT level C = Check and explain 1 ALERT level G = General alerts; check 2 ALERT type 1 CIF construction/syntax error, inconsistent or missing data 1 ALERT type 2 Indicator that the structure model may be wrong or deficient 6 ALERT type 3 Indicator that the structure quality may be low 0 ALERT type 4 Improvement, methodology, query or suggestion 0 ALERT type 5 Informative message, check

Comment top

This work is related to our previous communications on the synthesis and structure of 2-(3-methylsulfanyl-1-benzofuran-2-yl)acetic acid analogues (Choi et al., 2006; Seo et al., 2007). Here we report the crystal structure of the title compound (Fig. 1).

The benzofuran unit is essentially planar, with a mean deviation of 0.012 Å from the least-squares plane defined by the nine constituent atoms. In the title compound, the dihedral angle formed by the plane of the benzofuran unit and the plane of the phenyl ring is 44.1 (1)°. The molecular packing (Fig. 2) is stabilized by π···π stacking interactions between furan rings of adjacent benzofuran systems, with a Cg···Cgi distance of 3.566 (5) Å (Cg is the centroid of the O1/C8/C1/C2/C7 ring; symmetry code as in Fig. 2). Classical inversion-related O3—H1···O2i hydrogen bonds link the carboxyl groups of adjacent molecules (Table 1 and Fig. 2).

Related literature top

For the crystal structures of isomers of the title compound, see: Choi et al. (2006) and Seo et al. (2007).

Experimental top

Ethyl 2-(3-methylsulfanyl-5-phenyl-1-benzofuran-2-yl)acetate (652 mg, 2.0 mmol) was added to a solution of potassium hydroxide (561 mg, 10.0 mmol) in water (10 ml) and methanol (10 ml), and the mixture was heated at 333 K for 4hrs, then cooled. Water was added, and the solution was washed with dichloromethane. The aqueous layer was acidified to pH 1 with concentrated hydrochloric acid and then extracted with chloroform, dried over magnesium sulfate, filtered and concentrated under vacuum. The residue was purified by column chromatography (ethyl acetate) to afford the title compound as a colorless solid [yield 87%, m.p. 460–461 K; Rf = 0.64 (ethyl acetate)]. Single crystals suitable for X-ray diffraction were prepared by slow evaporation of a dilute solution of the title compound in acetone at room temperature.

Refinement top

Atom H1 of the hydroxy group was found in a difference Fourier map and refined with O—H restrained to 0.9 (1) Å. The other H atoms were positioned geometrically and refined using a riding model, with C—H = 0.95 Å for aromatic H atoms, 0.98 Å for methyl H atoms and 0.99 Å for methylene H atoms, and with Uiso(H) = 1.2Ueq(C) for aromatic and methylene H atoms and Uiso(H) = 1.5Ueq(C) for methyl H atoms.

Structure description top

This work is related to our previous communications on the synthesis and structure of 2-(3-methylsulfanyl-1-benzofuran-2-yl)acetic acid analogues (Choi et al., 2006; Seo et al., 2007). Here we report the crystal structure of the title compound (Fig. 1).

The benzofuran unit is essentially planar, with a mean deviation of 0.012 Å from the least-squares plane defined by the nine constituent atoms. In the title compound, the dihedral angle formed by the plane of the benzofuran unit and the plane of the phenyl ring is 44.1 (1)°. The molecular packing (Fig. 2) is stabilized by π···π stacking interactions between furan rings of adjacent benzofuran systems, with a Cg···Cgi distance of 3.566 (5) Å (Cg is the centroid of the O1/C8/C1/C2/C7 ring; symmetry code as in Fig. 2). Classical inversion-related O3—H1···O2i hydrogen bonds link the carboxyl groups of adjacent molecules (Table 1 and Fig. 2).

For the crystal structures of isomers of the title compound, see: Choi et al. (2006) and Seo et al. (2007).

Computing details top

Data collection: SMART (Bruker, 1997); cell refinement: SAINT (Bruker, 1997); data reduction: SAINT; program(s) used to solve structure: SHELXS97 (Sheldrick, 1997); program(s) used to refine structure: SHELXL97 (Sheldrick, 1997); molecular graphics: ORTEP-3 (Farrugia, 1997) and DIAMOND (Brandenburg, 1998)'; software used to prepare material for publication: SHELXL97.

Figures top
[Figure 1] Fig. 1. The molecular structure of the title compound, showing displacement ellipsoides drawn at the 50% probability level.
[Figure 2] Fig. 2. ππ interactions (dotted lines) in the title compound. Cg denotes the ring centroid. [Symmetry code: (i) -x, 1 - y, 2 - z; (ii) -x, 1 - y, 1 - z.]
2-(3-Methylsulfanyl-5-phenyl-1-benzofuran-2-yl)acetic acid top
Crystal data top
C17H14O3SF(000) = 624
Mr = 298.34Dx = 1.352 Mg m3
Monoclinic, P21/cMelting point = 460–461 K
Hall symbol: -p_2ybcMo Kα radiation, λ = 0.71073 Å
a = 10.857 (2) ÅCell parameters from 1299 reflections
b = 11.274 (2) Åθ = 2.5–27.1°
c = 11.978 (2) ŵ = 0.23 mm1
β = 90.777 (4)°T = 173 K
V = 1466.0 (4) Å3Block, colourless
Z = 40.40 × 0.10 × 0.10 mm
Data collection top
Bruker SMART CCD area-detector
diffractometer
1573 reflections with I > 2σ(I)
Radiation source: fine-focus sealed tubeRint = 0.076
Graphite monochromatorθmax = 25.0°, θmin = 2.5°
Detector resolution: 10.00 pixels mm-1h = 1212
φ and ω scansk = 1113
5235 measured reflectionsl = 1414
2390 independent reflections
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.060Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.152H atoms treated by a mixture of independent and constrained refinement
S = 1.03 w = 1/[σ2(Fo2) + (0.0737P)2 + 0.4676P]
where P = (Fo2 + 2Fc2)/3
2390 reflections(Δ/σ)max < 0.001
195 parametersΔρmax = 0.41 e Å3
1 restraintΔρmin = 0.30 e Å3
Crystal data top
C17H14O3SV = 1466.0 (4) Å3
Mr = 298.34Z = 4
Monoclinic, P21/cMo Kα radiation
a = 10.857 (2) ŵ = 0.23 mm1
b = 11.274 (2) ÅT = 173 K
c = 11.978 (2) Å0.40 × 0.10 × 0.10 mm
β = 90.777 (4)°
Data collection top
Bruker SMART CCD area-detector
diffractometer
1573 reflections with I > 2σ(I)
5235 measured reflectionsRint = 0.076
2390 independent reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0601 restraint
wR(F2) = 0.152H atoms treated by a mixture of independent and constrained refinement
S = 1.03Δρmax = 0.41 e Å3
2390 reflectionsΔρmin = 0.30 e Å3
195 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Refinement. Refinement of F2 against ALL reflections. The weighted R-factor wR and goodness of fit S are based on F2, conventional R-factors R are based on F, with F set to zero for negative F2. The threshold expression of F2 > σ(F2) is used only for calculating R-factors(gt) etc. and is not relevant to the choice of reflections for refinement. R-factors based on F2 are statistically about twice as large as those based on F, and R- factors based on ALL data will be even larger.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
S0.14850 (10)0.23359 (9)0.57947 (9)0.0309 (3)
O10.0811 (2)0.5739 (2)0.6300 (2)0.0266 (7)
O20.1048 (2)0.4462 (2)0.9100 (2)0.0265 (7)
O30.0877 (2)0.5047 (3)0.8757 (2)0.0297 (7)
H10.099 (6)0.526 (6)0.954 (5)0.11 (2)*
C10.1424 (3)0.3886 (3)0.5843 (3)0.0198 (9)
C20.2125 (3)0.4721 (3)0.5198 (3)0.0189 (9)
C30.3023 (3)0.4618 (3)0.4376 (3)0.0203 (9)
H30.33080.38590.41500.024*
C40.3495 (3)0.5651 (3)0.3894 (3)0.0200 (9)
C50.3068 (3)0.6753 (4)0.4257 (3)0.0232 (9)
H50.34020.74500.39330.028*
C60.2181 (3)0.6875 (4)0.5067 (3)0.0250 (9)
H60.19060.76300.53130.030*
C70.1722 (3)0.5836 (3)0.5494 (3)0.0205 (9)
C80.0665 (3)0.4546 (4)0.6483 (3)0.0234 (9)
C90.0320 (3)0.4211 (4)0.7269 (3)0.0307 (11)
H9A0.03980.33360.72600.037*
H9B0.11070.45400.69790.037*
C100.0165 (3)0.4601 (3)0.8469 (3)0.0220 (9)
C110.4407 (3)0.5580 (3)0.2981 (3)0.0198 (9)
C120.4281 (3)0.6317 (4)0.2039 (3)0.0275 (10)
H120.36160.68630.19870.033*
C130.5120 (4)0.6246 (4)0.1194 (3)0.0332 (11)
H130.50070.67260.05490.040*
C140.6120 (4)0.5496 (4)0.1259 (3)0.0325 (11)
H140.67030.54690.06740.039*
C150.6258 (3)0.4784 (4)0.2191 (3)0.0254 (10)
H150.69480.42680.22490.030*
C160.5411 (3)0.4812 (3)0.3036 (3)0.0209 (9)
H160.55130.43030.36630.025*
C170.2897 (4)0.2070 (4)0.6565 (4)0.0542 (15)
H17A0.35710.25080.62180.081*
H17B0.30840.12200.65590.081*
H17C0.28030.23380.73380.081*
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
S0.0362 (6)0.0260 (6)0.0304 (7)0.0089 (5)0.0004 (5)0.0024 (5)
O10.0237 (14)0.0361 (18)0.0201 (15)0.0051 (12)0.0003 (12)0.0009 (13)
O20.0220 (15)0.0358 (17)0.0219 (16)0.0052 (12)0.0058 (12)0.0015 (13)
O30.0170 (14)0.0507 (19)0.0211 (17)0.0056 (13)0.0029 (12)0.0028 (14)
C10.0185 (19)0.031 (2)0.010 (2)0.0033 (17)0.0002 (16)0.0005 (18)
C20.0172 (19)0.025 (2)0.014 (2)0.0018 (16)0.0062 (16)0.0005 (17)
C30.022 (2)0.021 (2)0.018 (2)0.0051 (16)0.0073 (17)0.0021 (17)
C40.0222 (19)0.021 (2)0.017 (2)0.0012 (16)0.0099 (17)0.0011 (16)
C50.029 (2)0.021 (2)0.019 (2)0.0045 (17)0.0029 (18)0.0068 (18)
C60.029 (2)0.024 (2)0.022 (2)0.0079 (18)0.0023 (18)0.0013 (19)
C70.0145 (19)0.030 (2)0.017 (2)0.0033 (16)0.0011 (16)0.0004 (18)
C80.021 (2)0.028 (2)0.020 (2)0.0034 (17)0.0059 (18)0.0004 (18)
C90.024 (2)0.043 (3)0.025 (2)0.0077 (18)0.0028 (18)0.005 (2)
C100.020 (2)0.023 (2)0.023 (2)0.0051 (16)0.0024 (18)0.0014 (17)
C110.023 (2)0.024 (2)0.012 (2)0.0050 (16)0.0048 (17)0.0003 (17)
C120.024 (2)0.034 (2)0.025 (2)0.0004 (18)0.0076 (19)0.0031 (19)
C130.032 (2)0.048 (3)0.019 (2)0.005 (2)0.0030 (19)0.008 (2)
C140.026 (2)0.050 (3)0.022 (2)0.004 (2)0.0050 (19)0.002 (2)
C150.025 (2)0.030 (2)0.021 (2)0.0002 (17)0.0028 (18)0.0068 (18)
C160.020 (2)0.030 (2)0.012 (2)0.0023 (17)0.0011 (16)0.0006 (17)
C170.069 (3)0.035 (3)0.058 (3)0.012 (2)0.030 (3)0.006 (2)
Geometric parameters (Å, º) top
S—C11.749 (4)C8—C91.483 (5)
S—C171.804 (4)C9—C101.511 (5)
O1—C81.372 (5)C9—H9A0.990
O1—C71.397 (4)C9—H9B0.990
O2—C101.238 (4)C11—C161.393 (5)
O3—C101.281 (4)C11—C121.407 (5)
O3—H10.97 (6)C12—C131.372 (5)
C1—C81.356 (5)C12—H120.950
C1—C21.441 (5)C13—C141.378 (6)
C2—C71.379 (5)C13—H130.950
C2—C31.399 (5)C14—C151.381 (6)
C3—C41.401 (5)C14—H140.950
C3—H30.950C15—C161.378 (5)
C4—C51.397 (5)C15—H150.950
C4—C111.487 (5)C16—H160.950
C5—C61.384 (5)C17—H17A0.980
C5—H50.950C17—H17B0.980
C6—C71.374 (5)C17—H17C0.980
C6—H60.950
C1—S—C17100.4 (2)C8—C9—H9B108.0
C8—O1—C7105.8 (3)C10—C9—H9B108.0
C10—O3—H1117 (4)H9A—C9—H9B107.2
C8—C1—C2105.9 (4)O2—C10—O3125.0 (3)
C8—C1—S126.2 (3)O2—C10—C9117.8 (3)
C2—C1—S127.9 (3)O3—C10—C9117.2 (4)
C7—C2—C3118.9 (3)C16—C11—C12118.2 (4)
C7—C2—C1106.6 (3)C16—C11—C4121.8 (3)
C3—C2—C1134.5 (4)C12—C11—C4120.0 (3)
C4—C3—C2118.9 (3)C13—C12—C11119.9 (4)
C4—C3—H3120.5C13—C12—H12120.0
C2—C3—H3120.5C11—C12—H12120.0
C5—C4—C3119.1 (4)C12—C13—C14121.7 (4)
C5—C4—C11120.2 (3)C12—C13—H13119.2
C3—C4—C11120.6 (3)C14—C13—H13119.2
C6—C5—C4122.9 (4)C13—C14—C15118.6 (4)
C6—C5—H5118.5C13—C14—H14120.7
C4—C5—H5118.5C15—C14—H14120.7
C7—C6—C5115.8 (4)C16—C15—C14121.0 (4)
C7—C6—H6122.1C16—C15—H15119.5
C5—C6—H6122.1C14—C15—H15119.5
C6—C7—C2124.3 (4)C15—C16—C11120.6 (4)
C6—C7—O1126.0 (3)C15—C16—H16119.7
C2—C7—O1109.6 (3)C11—C16—H16119.7
C1—C8—O1112.0 (3)S—C17—H17A109.5
C1—C8—C9132.0 (4)S—C17—H17B109.5
O1—C8—C9115.9 (3)H17A—C17—H17B109.5
C8—C9—C10117.3 (3)S—C17—H17C109.5
C8—C9—H9A108.0H17A—C17—H17C109.5
C10—C9—H9A108.0H17B—C17—H17C109.5
C17—S—C1—C8105.6 (4)S—C1—C8—O1177.8 (2)
C17—S—C1—C276.6 (4)C2—C1—C8—C9176.0 (3)
C8—C1—C2—C70.6 (4)S—C1—C8—C92.1 (6)
S—C1—C2—C7177.6 (3)C7—O1—C8—C10.1 (4)
C8—C1—C2—C3178.1 (3)C7—O1—C8—C9176.5 (3)
S—C1—C2—C30.0 (6)C1—C8—C9—C10120.0 (4)
C7—C2—C3—C40.9 (4)O1—C8—C9—C1064.4 (4)
C1—C2—C3—C4178.2 (3)C8—C9—C10—O2171.0 (3)
C2—C3—C4—C50.8 (5)C8—C9—C10—O39.4 (5)
C2—C3—C4—C11177.1 (3)C5—C4—C11—C16136.8 (4)
C3—C4—C5—C60.9 (5)C3—C4—C11—C1645.3 (5)
C11—C4—C5—C6177.1 (3)C5—C4—C11—C1242.0 (5)
C4—C5—C6—C70.8 (5)C3—C4—C11—C12135.9 (4)
C5—C6—C7—C22.7 (5)C16—C11—C12—C131.5 (5)
C5—C6—C7—O1178.8 (3)C4—C11—C12—C13179.7 (3)
C3—C2—C7—C62.8 (5)C11—C12—C13—C142.4 (6)
C1—C2—C7—C6179.2 (3)C12—C13—C14—C151.4 (6)
C3—C2—C7—O1178.5 (3)C13—C14—C15—C160.5 (6)
C1—C2—C7—O10.5 (4)C14—C15—C16—C111.4 (5)
C8—O1—C7—C6178.9 (3)C12—C11—C16—C150.3 (5)
C8—O1—C7—C20.3 (3)C4—C11—C16—C15178.5 (3)
C2—C1—C8—O10.4 (4)
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O3—H1···O2i0.97 (6)1.66 (6)2.630 (4)174 (6)
Symmetry code: (i) x, y+1, z+2.

Experimental details

Crystal data
Chemical formulaC17H14O3S
Mr298.34
Crystal system, space groupMonoclinic, P21/c
Temperature (K)173
a, b, c (Å)10.857 (2), 11.274 (2), 11.978 (2)
β (°) 90.777 (4)
V3)1466.0 (4)
Z4
Radiation typeMo Kα
µ (mm1)0.23
Crystal size (mm)0.40 × 0.10 × 0.10
Data collection
DiffractometerBruker SMART CCD area-detector
Absorption correction
No. of measured, independent and
observed [I > 2σ(I)] reflections
5235, 2390, 1573
Rint0.076
(sin θ/λ)max1)0.595
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.060, 0.152, 1.03
No. of reflections2390
No. of parameters195
No. of restraints1
H-atom treatmentH atoms treated by a mixture of independent and constrained refinement
Δρmax, Δρmin (e Å3)0.41, 0.30

Computer programs: SMART (Bruker, 1997), SAINT (Bruker, 1997), SAINT, SHELXS97 (Sheldrick, 1997), SHELXL97 (Sheldrick, 1997), ORTEP-3 (Farrugia, 1997) and DIAMOND (Brandenburg, 1998)', SHELXL97.

Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
O3—H1···O2i0.97 (6)1.66 (6)2.630 (4)174 (6)
Symmetry code: (i) x, y+1, z+2.
 

Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds